Completed Large Condo
Assembly takes approximately one hour
Parts List:
Platforms and Condos
Towers and Hardware
8.75” - 4 Pieces Each
10.50” - 4 Pieces Each
Phase One: Building the Condos
Step One: Build Level Two, Small Condo
8 Wingnuts
9 Pieces
1 Piece
Double
Treaded Rods
4 Pieces
Allen
Wrench
Cat Perch, 2 Pieces
Cat Perch
with Back, I Piece
A: 9.75” Sisal Post, 3 Pieces
B: 10.75 “ Sisal Post, 1 piece
C: 14.625” Sisal Post with bolt,
1 piece
D: 3.125“ Sisal Post, 2 pieces
E: 13.75“ Sisal Post with bolt,
1 piece
F. 11.50“ Sisal Post with bolt,
1 piece
G: 8.625“ Sisal Post with bolt,
1 piece
Double Threaded Metal Rods
Small Condo Top,
1 piece
Level 2
Small Condo Base,
1 piece
Ramp, 1 piece
Large Condo Base,
1 piece
Large Condo Top,
1 piece
1. Attach 8.75” threaded
dowels
into smooth side of
small condo roof.
Smooth Side
Smooth Side
2. Place all 4 side
panels of small condo
in place, as shown.
3. Align the Level 2 Base on
top of the bottom side of
the Small Condo, as shown.
4. Secure with 4
wingnuts and flip right-
side up.
5. Attach ramp with
Large Bolt (only 1 bolt that size is provided).
Set aside.
Step Two: Build Large Condo
1. Attach 10.50”
threaded dowels
into smooth side of
Large Condo roof.
2. Place all 4 side
panels of Large Condo
in place, as shown.
3. Align the Large Condo Bottom
piece to the bottom side of the
Large Condo, as shown. Bottom
should be smooth-side up.
4. Secure with 4 wingnuts
and flip right-side up. Set
aside.
Smooth Side
Completed Small
Condo
1 2 3
4 5
1
2
3
4
Small Condo Side,
2 pieces
Small Condo Side,
2 pieces
Large Condo Side,
1 piece
Large Condo Side,
1 piece
Large Condo End,
2 pieces
Main Base,
1 piece
Deck Between Condos,
1 piece