Heartland HCTTDW-Prev is a dishwasher that comes with a water heating feature and is intended for connection to a hot water supply. It features a 90° elbow brass fitting for the water inlet valve, ensuring a secure and efficient connection. The dishwasher requires a 120-volt, 60 Hz electrical supply and should be connected to a separate circuit with a fuse or circuit breaker rated for at least 15 amps (20 amps if connected with a disposer) but not more than 20 amps. The incoming hot water temperature should be at least 120°F (49°C), and the water pressure should be between 20-90 psi.