Milescraft 1303 Operating instructions

Milescraft
Brand
Milescraft
Model
1303
Type
Operating instructions

Milescraft 1303 is a power tool designed to assist users in various drilling and cutting tasks. This versatile device can be utilized for a wide range of projects, including drilling holes, making precise cuts, and shaping materials.

With a maximum speed of 3,000 RPM, the Milescraft 1303 is capable of handling even the most challenging materials. Its adjustable drilling speed allows users to customize the tool's performance based on the specific task at hand. The slower RPM settings are ideal for drilling into harder materials, while the higher RPM settings can be used for faster drilling in softer materials.

Milescraft 1303 is a power tool designed to assist users in various drilling and cutting tasks. This versatile device can be utilized for a wide range of projects, including drilling holes, making precise cuts, and shaping materials.

With a maximum speed of 3,000 RPM, the Milescraft 1303 is capable of handling even the most challenging materials. Its adjustable drilling speed allows users to customize the tool's performance based on the specific task at hand. The slower RPM settings are ideal for drilling into harder materials, while the higher RPM settings can be used for faster drilling in softer materials.

Safety Warning:
Do not attempt to operate this tool until you have read and understand all safety warnings included. Failure
to follow these safety instructions may result in bodily injury.
Always read, understand and follow your power tool manufacturer’s instructions for safety. Always wear ANSI Z87.1 eye
protection, gloves, hearing protection and other appropriate safety gear. Always keep hands, face, loose clothing and body at
a safe distance from spindles and cutting tools. Always keep a firm grip on your power tool and accessory when in operation.
Failure to do so may result in bodily injury. Always disconnect from power source before adjusting your power tool.
Make sure all wires, cables, pipes and any other objects that may cause hazard are clear of the work area. This product
is not intended for operation in excess of 3,000 RPM. Do not use excessive force when drilling. Adjust the drilling speed
according to the job; the harder the material, the slower the RPM’s.
Avertissement de sécurité:
Ne pas essayer de faire fonctionner cet outil avant d’avoir lu et compris toutes les instructions de sécurité
incluses. Le non-respect de ces instructions de sécurité peut entraîner des blessures corporelles.
Toujours lire, comprendre et suivre les instructions du fabricant de l’outil électrique pour des raisons de sécurité. Toujours
porter des lunettes protectrices conformes à la norme ANSI Z87.1, des gant, une protection auditive, et tout autre équipe-
ment de protection approprié. Toujours garder mains, visage, vêtements amples et corps à distance des outils rotatifs et
tranchants. Toujours fermement tenir l’outil électrique et tout accessoire en marche. Tout manquement à ces instructions
peut entraîner des blessures corporelles. Toujours débrancher un outil électrique avant de le régler.
Vérifier que tout fil, câble, tuyau et tout autre objet qui puisse causer un danger soit éloigné du lieu de travail. Ce produit
n’est pas conçu pour fonctionner à plus de 3.000 tr/min. Ne pas exercer de force excessive en perçant. Régler la vélocité du
perçage en fonction du travail à effectuer; plus le matériau est dur, plus la vitesse doit être lente.
Advertencia de seguridad:
No intente operar esta herramienta hasta que haya leído e comprendido todas las advertencias de seguridad
incluidas. El no seguir estas instrucciones de seguridad podría resultar en lesiones corporales.
Lea, comprenda y siga siempre las instrucciones del fabricante de su herramienta eléctrica por motivo de seguridad. Lleve
siempre puesto protección ocular ANSI Z87.1, guantes, protección auditiva y otro equipo de seguridad apropiado. Mantenga
siempre las manos, la cara, la ropa suelta y el cuerpo a una distancia segura del eje y de las herramientas de corte. Agarre
siempre su herramienta eléctrica y accesorio con fuerza cuando los opere. El no hacerlo podría resultar en lesiones corpora-
les. Desconecte siempre de la fuente de electricidad antes de ajustar su herramienta eléctrica.
Asegúrese de que todos los alambres, cables, tubos y cualquier otra objeto que pueda ocasionar peligro estén despejados
del área de trabajo. Este producto no está diseñado para operar en exceso de 3,000 RPM. No utilice fuerza en exceso al
taladrar. Ajuste la velocidad del taladro de acuerdo a la tarea; mientras más duro el material, más lentas las RPM.
1303
www.milescraft.com • Call us at: (1)224-227-6930 • E-mail us at: info@milescraft.com
  • Page 1 1

Milescraft 1303 Operating instructions

Milescraft
Brand
Milescraft
Model
1303
Type
Operating instructions

Milescraft 1303 is a power tool designed to assist users in various drilling and cutting tasks. This versatile device can be utilized for a wide range of projects, including drilling holes, making precise cuts, and shaping materials.

With a maximum speed of 3,000 RPM, the Milescraft 1303 is capable of handling even the most challenging materials. Its adjustable drilling speed allows users to customize the tool's performance based on the specific task at hand. The slower RPM settings are ideal for drilling into harder materials, while the higher RPM settings can be used for faster drilling in softer materials.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents