Kanguru Clone 4HD-12HD SATA Owner's manual

KanguruClone 4HD & 12HD - SATA

User Guide

2

NOTICES AND INFORMATION

Please be aware of the following points before using your KanguruClone

DOS®, Windows 95® , Windows 98®, Windows NT®, Windows 2000®, Windows ME®, Windows

XP®, Windows Vista® and Windows 7® are registered trademarks of Microsoft Inc. Apple®

and Macintosh® are registered trademarks of Apple Computer Inc. IBM and OS/2 are registered

trademarks of the International Business Machines Corporation. All other brand or product names are

trademarks of their respective companies or organizations.

Kanguru Solutions will not be held responsible for any illegal use of this product nor any losses

incurred while using this product. The user himself is responsible for the copyright laws, and is fully

responsible for any illegal actions taken.

Customer Service

To obtain service or technical support for your system, please contact Kanguru Solutions Technical

Support Department at 508-376-4245, or visit www.Kanguru.com for web support.

Legal notice

In no event shall Kanguru Solutions’ liability exceed the price paid for the product from direct,

indirect, special, incidental, or consequential software, or its documentation. Kanguru Solutions

offers no refunds for its products. Kanguru Solutions makes no warranty or representation, expressed,

implied, or statutory, with respect to its products or the contents or use of this documentation and

all accompanying software, and specifically disclaims its quality, performance, merchantability, or

fitness for any particular purpose. Kanguru Solutions reserves the right to revise or update its products,

software, or documentation without obligation to notify any individual or entity.

Export Law Compliance

Regardless of any disclosure made to Kanguru Solutions pertaining to the ultimate destination of the

specific Kanguru product, you warrant that you will not export, directly or indirectly, any Kanguru

product without first obtaining the approval of Kanguru Solutions and the appropriate export license

from the Department of Commerce or other agency of the United States Government. Kanguru

Solutions has a wide range of products and each product family has different license requirements

relative to exports.

FCC Compliance Statements

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the Distance between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Notices and Information

3

Table of Contents

Notices and Information ......................................................................................... 2

1. Introduction ........................................................................................ 5

1.1 KanguruClone HD Package Contents .................................................... 6

1.2 Specifications ............................................................................................. 6

2. Getting to Know Your KanguruClone ............................................. 7

2.1 Hardware Setup ........................................................................................ 7

2.2 Appearance of KanguruClone 4HD / 12HD ........................................... 8

2.3 The Menu System .................................................................................... 10

2.4 Function Diagram ................................................................................... 11

3. Using Your KanguruClone .............................................................. 12

3.1 Copy Functions ....................................................................................... 12

3.1.1 Disk Copy ....................................................................................... 13

3.1.2 Brief Copy ....................................................................................... 14

3.1.3. Resize Copy ................................................................................... 15

3.1.4 Area Copy ....................................................................................... 16

3.1.5 Ratio Copy ...................................................................................... 17

3.1.6 Disk Compare ................................................................................. 18

3.1.7 Brief Compare ................................................................................ 19

3.1.8 Area Compare ................................................................................ 20

3.1.9 Ratio Compare ............................................................................... 21

3.2 Diagnostic Functions ............................................................................... 22

3.2.1 Random Seek .................................................................................. 22

3.2.2 Seq. Seek ......................................................................................... 23

3.2.3 Write Pattern .................................................................................. 24

3.2.4 Read Verify ..................................................................................... 25

3.3 Tool Functions ......................................................................................... 26

3.3.1 Full Erase ........................................................................................ 26

3.3.2 Scan Disk ........................................................................................ 27

3.3.3. Quick Erase ................................................................................... 28

3.3.4 Min Acoustic ................................................................................... 29

3.3.5 Max Perform .................................................................................. 30

3.3.6 HDD Wipe ...................................................................................... 31

3.3.7 Check Sum ...................................................................................... 32

3.3.8 Port Test .......................................................................................... 33

4

Table of Contents

3.4 Configuration Functions ........................................................................ 34

3.4.1 HD Mode ......................................................................................... 34

3.4.2 Tran Mode ...................................................................................... 35

3.4.3 Pwn On Mode ................................................................................. 36

3.4.4 Power On Wait ............................................................................... 37

3.4.5 Power Off Wait ............................................................................... 38

3.4.6 Cap. Chk ......................................................................................... 39

3.4.7 Security ........................................................................................... 40

3.4.7.1 Enabling Security ................................................................. 40

3.4.7.2 Disabling Security ................................................................ 41

3.4.8 Set Pattern ...................................................................................... 42

3.4.9 Set Copy Areas ............................................................................... 43

3.4.10 Set Copy Ratios ............................................................................ 44

3.4.11 Wipe Cycles................................................................................... 45

3.4.12 HPA. Chk ...................................................................................... 46

3.4.13 Trans BLK .................................................................................... 47

3.4.14 Resize Part. ................................................................................... 48

3.4.15 Btn. Snd. ....................................................................................... 49

3.4.16 HD Info ......................................................................................... 50

3.4.17 Load Default ................................................................................. 51

3.4.18 Update Version ............................................................................. 52

3.4.19 About ............................................................................................. 53

4. Troubleshooting ................................................................................ 54

5. FAQ ................................................................................................... 55

6. Tech Support..................................................................................... 55

7. Warranty .......................................................................................... 56

RMA Procedure ..................................................................................................... 56

5

Introduction

1. Introduction

Congratulations on your purchase of the KanguruClone HD-SATA from Kanguru Solutions.

The KanguruClone is a high speed, stand-alone UDMA IDE and SATA hard drive duplicator that

can simultaneously clone up to 4 or 12 hard drives (depending on model). The duplicator has many

advanced features for the IT professional, yet a novice can begin cloning hard drives within minutes

of taking it out of the box.

The KanguruClone copies the content of a Master hard drive to up to 4 or 12 drives simultaneously

(depending on model). With ultra fast copy speeds of up to 6GB/min, the KanguruClone is one of the

fastest cloning systems available.

Features

√ Up to 6GB/min transfer rates

√ Simultaneously clone up to 4 or 12 hard drives (depending on model)

√ HDD Size and Brand independent: Supports all standard ATA (IDE) and SATA Hard Drives.

Master & Target drives can be different sizes, brands and models.

√ One-year Standard Warranty: This system comes complete with a one-year parts and 90 day

labor warranty.

√ Clones any operating system: including DOS, Win98, Win2K, Win NT, Win XP, Win Vista,

Linux, Mac and many more.

√ 9 Copy Functions:

○ Disk Copy - Full copy, sector for sector

○ Brief Copy - Copies only sectors with data (compatible with major file systems)

○ Resize Copy - Copies HDDs with different capacities

○ Area Copy - Copies a defined area of the Master HDD

○ Ratio Copy - Copies a defined percentage of the Master HDD

○ Disk Compare - Compares Master HDD to Target HDD for accuracy

○ Brief Compare - Compares only sectors with data (compatible with major file systems)

○ Area Compare - Compares a defined area of the Master HDD

○ Ratio Compare - Compares a defined percentage of the Master HDD

√ Powerful diagnostic functions

√ Supports HPA (Host Protection Area) copy

6

Package Contents / Specifications

1.1 KanguruClone HD Package Contents

If any of the following items are missing, please call Kanguru Solutions’ Tech Support department at:

(508) 376-4245, extension 2 and replacement parts will be shipped to you ASAP.

• KanguruClone HD unit with internal power supply

• AC power cable

• Manual & User registration

4HD Models:

• 7 x SATA data + power cable

• 5 x 3.5” IDE data cable

• 5 x 2.5” IDE adapter cable

• 5 x molex power cable

12HD Models:

• 15 x SATA data + power cable

• 13 x 3.5” IDE data cable

• 13 x 2.5” IDE adapter cable

• 13 x molex power cable

1.2 Specifications

KanguruClone 4HD - SATA

LCD Screen 20 x 4 Characters back-lit LCD

Input Device 4 Push Buttons

Dimensions 7” x 20” x 4”

Weight 20 lbs. (shipping weight)

Power Supply Standard 250W ~ 4P Power (5V~12V)

Operating Temperature 5ºC ~ 55ºC

Relative Humidity 20% ~ 60%

KanguruClone 12HD - SATA

LCD Screen 20 x 4 Characters back-lit LCD

Input Device 4 Push Buttons

Dimensions 28” x 20” x 4”

Weight 42 lbs. (shipping weight)

Power Supply Standard 520W ~ 4P Power (5V~12V)

Operating Temperature 5ºC ~ 55ºC

Relative Humidity 20% ~ 60%

7

2. Getting to Know Your KanguruClone

2.1 Hardware Setup

1. Place the KanguruClone where there is proper ventilation. Avoid using the KanguruClone in

environments with high temperatures.

2. Before plugging in the AC Power Cable, please make sure that the voltage is adjusted to the

same as your local voltage 110V/220V.

Note: Make sure that sufficient power is supplied to the KanguruClone. Incorrect power will

cause faulty operation. It is highly recommended that you use a UPS (uninterruptible power

supply) with the KanguruClone.

3. The unit is designed to hold the Master drive in the bay located on the front of the unit. Before

connecting a PATA Master drive, make sure that the jumpers are set to either MASTER or

CABLE SELECT. You may now connect the Master drive.

4. You are now ready to begin using your KanguruClone. To begin, turn on the unit with the power

switch located on the back panel.

Things to remember

• Make sure that sufficient power is supplied to the KanguruClone. Incorrect power will cause

faulty operation. It is highly recommended that you use a UPS (uninterruptible power supply)

with the KanguruClone.

• The KanguruClone is powered by an internal power supply that is controlled by a rocker switch

located at the rear of the unit.

• The KanguruClone supplies power to all drives during a cloning session. There is no need to

connect an external power source to the drives. The unit can supply up to 1.5A at 12V and up to

1A at 5V to each drive.

Note: the drives are not powered until you start a copy operation.

• It is OK to connect and disconnect Master or Target drives while the KanguruClone is powered

on. However, do NOT connect or disconnect drives while any function is running or is in

progress. The yellow status light will turn on to indicate that the unit is cloning or operating.

• The supplied cables are NOT standard cables like the ones found in a PC. Do not attempt to use

these cables in a PC nor to use PC cables with the KanguruClone. Doing so may cause damage

to the unit and drives.

Getting to Know Your KanguruClone

8

2.2 Appearance of KanguruClone 4HD / 12HD

Front View

4HD

12HD

Rear View

4HD

12HD

Master Hard Drive bay

Master Hard Drive power indicator (yellow)

LCD Screen Input Buttons

Master Hard Drive bay LCD Screen

Power supply switch System power switch

Appearance of KanguruClone 4HD / 12HD

Master Hard Drive Power port

Master Hard Drive IDE port

Master Hard Drive SATA port

Master Hard Drive power indicator (yellow)

Input Buttons

Fan Power cable connection

Master Hard Drive Power port

Master Hard Drive IDE port

Master Hard Drive SATA port

Success indicator (green)

Failure indicator (red)

Success indicator (green)

9

Top View

4HD

12HD

Success indicator (green)

SATA cable port

IDE cable port

Power cable port

A B C D

I J

K

L

E F G H

A B C D

Success indicator (green)

SATA cable port

IDE cable port

Power cable port

Appearance of KanguruClone 4HD / 12HD

MASTER

Target Hard Drive power indicator (yellow)

Failure indicator (red)

Target Hard Drive power indicator (yellow)

10

2.3 The Menu System

Kanguru Solutions designed the KanguruClone’s menu system with the professional in mind. The

menu system is fast, responsive, and easy to navigate. This means fewer key presses are needed to

achieve a desired action.

The menu system is controlled by 4 push buttons located to the right of the LCD screen.

[COPY]

BRIEF COPY

Run by ‘>’

There are three tiers to the KanguruClone’s menu system:

Main Menu

[COPY]

BRIEF COPY

Run by ‘>’

Setup Menu

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

Function Menu

[ ] DISK COPY

[ ] BRIEF COPY

[ ] RESIZE COPY

->

<- Back UP/DN Sel ->

X

After selecting a function, press the LEFT button until you return to the Main Menu. The selected

function should appear on the Main Menu screen. Press the RIGHT button to start the function.

: Press the LEFT button to enter the Setup Menu.

: Press the UP or DOWN button to navigate between modes

(COPY, DIAGNOSTIC, and TOOL)

: Press the RIGHT button to start the selected mode.

: Press the LEFT button to enter the Main Menu.

: Press the UP or DOWN button to navigate the modes.

: Press the RIGHT button to enter the function menu for the

selected mode.

: Press the LEFT button to go back to the Setup Menu.

: Press the UP or DOWN button to navigate functions.

: Press the RIGHT button to select or deselect a function. A

selected function will be marked with an [ X ].

The Menu System

LEFT button DOWN button

UP button RIGHT button

11

2.4 Function Diagram

Function

COPY DIAGNOSTIC TOOL CONFIGURATION

DISK COPY

BRIEF COPY

RESIZE COPY

AREA COPY

RATIO COPY

DISK

COMPARE

AREA

COMPARE

RATIO

COMPARE

BRIEF

COMPARE

RANDOM

SEEK

SEQ.SEEK

WRITE

PATTERN

READ VERIFY

FULL ERASE

SCAN DISK

QUICK ERASE

MIN

ACOUSTIC

MAX

PERFORMANCE

HDD WIPE

CHECK SUM

PORT TEST

HD MODE

TRAN MODE

POWERON

WAIT

POWEROFF

WAIT

CAP CHK

SECURITY

SET PATTERN

SET

COPY AREAS

SET COPY

RATIOS

WIPE CYCLES

HPA CHK

PWN ON

MODE

TRANS BLK

HD INFO

RESIZE PART.

LOAD DEFAULT

UPDATE

VERSION

ABOUT

Function Diagram

12

3. Using Your KanguruClone

Before you begin any function, connect all Master and Target hard drives. All PATA hard drives must

have their jumpers set to either MASTER or CABLE SELECT.

The KanguruClone has 4 main modes: COPY, DIAGNOSTIC, TOOL and CONFIGURATION. You

can navigate between these modes from the Setup Menu by pressing the UP / DOWN buttons. When

you have reached the desired mode, press the RIGHT button to enter that mode.

3.1 Copy Functions

The KanguruClone can clone hard drives in one of 5 ways: Disk Copy, Brief Copy, Resize Copy, Area

Copy and Ratio Copy.

After duplication has been completed you have 4 options for verifying that all of the Target hard

drives match the Master: Disk Compare, Brief Compare, Area Compare and Ratio Compare.

Note: Compare functions can be used in conjunction with the Copy functions to achieve an all in one

Copy and Compare function. To do so, simply select a Copy function and a Compare function at the

same time.

Using Your KanguruClone / Copy Functions

13

3.1.1 Disk Copy

The Disk Copy function clones hard drives sector-by-sector from the Master to the Target(s) and

supports all data formats. This mode is slower than other modes but it is also the most reliable copy

method. Disk Copy is the default COPY function.

Note: When performing a Disk Copy, Kanguru Solutions recommends using Master and the Target

disks of the same capacity. If you want to clone a Master hard drive to Targets of a different capacity,

please use the Resize Copy function. For more information on Resize Copy, please see section 3.1.3

Resize Copy, p.15.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] DISK COPY

[ ] BRIEF COPY

[ ] RESIZE COPY

->

<- Back UP/DN Sel ->

X

[COPY]

DISK COPY

Run by ‘>’

1. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

2. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the DISK COPY function. Press the

RIGHT button to select DISK COPY.

3. Press the LEFT arrow twice to return to the Main Menu.

4. Press the RIGHT button to begin the Disk Copy.

5. Once the KanguruClone has finished cloning, it will display

a “V” for verified target drives or an “X” for failed drives.

Disk Copy

14

3.1.2 Brief Copy

The Brief Copy function clones only sectors with data and will skip the blank sectors (including data

hidden in sub channels). This mode is the fastest but will only support the following file systems:

FAT, FAT16, FAT32, NTFS, HFS, EXT1, EXT2, EXT3.

Note: When performing a Brief Copy, Kanguru Solutions recommends using Master and the Target

disks of the same capacity. If you want to clone a Master hard drive to Targets of a different capacity,

please use the Resize Copy function. For more information on Resize Copy, please see section 3.1.3

Resize Copy, p.15.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] DISK COPY

[ ] BRIEF COPY

[ ] RESIZE COPY

->

<- Back UP/DN Sel ->

X

[COPY]

BRIEF COPY

Run by ‘>’

1. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

2. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the BRIEF COPY function. Press the

RIGHT button to select BRIEF COPY.

3. Press the LEFT arrow twice to return to the Main Menu.

4. Press the RIGHT button to begin the Brief Copy.

5. Once the KanguruClone has finished cloning, it will display

a “V” for verified target drives or an “X” for failed drives.

Brief Copy

15

3.1.3. Resize Copy

The Resize Copy function is used to clone Master and Target drives with different capacities. This

mode only copies the sectors with information and skips the blank sectors. This mode is faster than

Disk Copy, but slower than Brief copy because it needs extra time to calculate the capacity difference

between the Master and Target drives.

Note: You can only copy from a smaller capacity Master drive to larger capacity Target drives. Target

drives in a session must all have the same capacity (e.g. a 40GB Master drive and 60GB Target

drives.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] DISK COPY

[ ] BRIEF COPY

[ ] RESIZE COPY

->

<- Back UP/DN Sel ->

X

[COPY]

RESIZE COPY

Run by ‘>’

1. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

2. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the RESIZE COPY function. Press the

RIGHT button to select RESIZE COPY.

3. Press the LEFT arrow twice to return to the Main Menu.

4. Press the RIGHT button to begin the Resize Copy.

5. Once the KanguruClone has finished cloning, it will display

a “V” for verified target drives or an “X” for failed drives.

Note: Linux file systems are not supported by the Resize Copy function.

Resize Copy

16

3.1.4 Area Copy

The Area Copy function allows you to copy a defined area of the Master hard drive. You can define

up to 8 allocation sets on a hard drive. You must define the beginning and ending sectors before

using this function. To define the sectors you have to enter the CONFIGURATION mode, select SET

COPY AREA and then define the beginning and ending sectors. For more information on defining the

beginning and ending sectors, please see section 3.4.9 Set Copy Areas, p.43.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] BRIEF COPY

[ ] RESIZE COPY

[ ] AREA COPY

->

<- Back UP/DN Sel ->

X

[COPY]

AREA COPY

Run by ‘>’

1. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

2. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the AREA COPY function. Press the

RIGHT button to select AREA COPY.

3. Press the LEFT arrow twice to return to the Main Menu.

4. Press the RIGHT button to begin the Area Copy.

5. Once the KanguruClone has finished cloning, it will display

a “V” for verified target drives or an “X” for failed drives.

Area Copy

17

3.1.5 Ratio Copy

The Ratio Copy function allows you to copy a defined percentage of the Master hard drive. The

Master hard drive is divided in 1000 units. You must define the beginning and ending percentages

before using this function. To define the percentages you have to enter the CONFIGURATION mode,

select SET COPY RATION and then define the ratio percentage. For more information on defining

the beginning and ending sectors, please see section 3.4.10 Set Copy Ratio p.44.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] RESIZE COPY

[ ] AREA COPY

[ ] RATIO COPY

->

<- Back UP/DN Sel ->

X

[COPY]

RATIO COPY

Run by ‘>’

1. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

2. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the RATIO COPY function. Press the

RIGHT button to select RATIO COPY.

3. Press the LEFT arrow twice to return to the Main Menu.

4. Press the RIGHT button to begin the Ratio Copy.

5. Once the KanguruClone has finished cloning, it will display

a “V” for verified target drives or an “X” for failed drives.

Ratio Copy

18

3.1.6 Disk Compare

The Disk Compare function compares drives sector by sector to assure that all of the Target drives

have the same information as the Master drive. Disk compare can be used in conjunction with the

Disk Copy function.

Note: Compare functions can only be used when the UDMA transfer mode is disabled. To disable

the UDMA you have to enter the CONFIGURATION mode, select TRAN MODE and then define

the Transfer Mode as “UDMA0”. For more information on Transfer Mode, please see section 3.4.2

Tran Mode, p.35.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] AREA COPY

[ ] RATIO COPY

[ ] DISK COMPARE

->

<- Back UP/DN Sel ->

X

[COPY]

DISK COMPARE

Run by ‘>’

1. Leave all drives in place after a Disk Copy session has

completed.

2. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

3. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the DISK COMPARE function. Press

the RIGHT button to select DISK COMPARE.

4. Press the LEFT arrow twice to return to the Main Menu.

5. Press the RIGHT button to begin the Disk Compare.

6. Once the KanguruClone has finished comparing, it will

display a “V” for verified target drives or an “X” for failed

drives.

Disk Compare

19

3.1.7 Brief Compare

The Brief Compare function only compares the sectors with information and skips the blank sectors

to assure that all of the Target drives have the same information as the Master drive. Brief Compare

can be used in conjunction with the Brief Copy function.

Note: Compare functions can only be used when the UDMA transfer mode is disabled. To disable

the UDMA you have to enter the CONFIGURATION mode, select TRAN MODE and then define

the Transfer Mode as “UDMA0”. For more information on Transfer Mode, please see section 3.4.2

Tran Mode, p.35.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] RATIO COPY

[ ] DISK COMPARE

[ ] BRIEF COMPARE

->

<- Back UP/DN Sel ->

X

[COPY]

BRIEF COMPARE

Run by ‘>’

1. Leave all drives in place after a Brief Copy session has

completed.

2. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

3. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the BRIEF COMPARE function. Press

the RIGHT button to select BRIEF COMPARE.

4. Press the LEFT arrow twice to return to the Main Menu.

5. Press the RIGHT button to begin the Brief Compare.

6. Once the KanguruClone has finished comparing, it will

display a “V” for verified target drives or an “X” for failed

drives.

Brief Compare

20

3.1.8 Area Compare

The Area Compare function only compares the sector defined by an Area Copy.

Note: Compare functions can only be used when the UDMA transfer mode is disabled. To disable

the UDMA you have to enter the CONFIGURATION mode, select TRAN MODE and then define

the Transfer Mode as “UDMA0”. For more information on Transfer Mode, please see section 3.4.2

Tran Mode, p.35.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] DISK COMPARE

[ ] BRIEF COMPARE

[ ] AREA COMPARE

->

<- Back UP/DN Sel ->

X

[COPY]

AREA COMPARE

Run by ‘>’

1. Leave all drives in place after an Area Copy session has

completed.

2. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

3. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the AREA COMPARE function. Press

the RIGHT button to select AREA COMPARE.

4. Press the LEFT arrow twice to return to the Main Menu.

5. Press the RIGHT button to begin the Area Compare.

6. Once the KanguruClone has finished comparing, it will

display a “V” for verified target drives or an “X” for failed

drives.

Area Compare

Page is loading ...

Kanguru Clone 4HD-12HD SATA Owner's manual

Kanguru Clone 4HD-12HD SATA Owner's manual

Related papers

Other documents