MK Diamond Higgins Jig Owner's manual

MK Diamond
Brand
MK Diamond
Model
Higgins Jig
Type
Owner's manual

MK Diamond Higgins Jig

The MK Diamond Higgins Jig is a fast and safe tool for producing precise right angle corners, paver corners, and lintel corners in various materials, including veneer, river rock, and other irregularly shaped materials.

Key Features and Benefits:

  • Simple, tool-free setup with quick lever adjustments for cutting depth and veneer thickness
  • Reliable accuracy, eliminating the need for additional cleanup
  • Versatile usage for cutting corners in various materials

Applications:

  • Producing 2 x 8 right angle corners in veneer
  • Cutting paver corners
  • Creating lintel corners

MK Diamond Higgins Jig

The MK Diamond Higgins Jig is a fast and safe tool for producing precise right angle corners, paver corners, and lintel corners in various materials, including veneer, river rock, and other irregularly shaped materials.

Key Features and Benefits:

  • Simple, tool-free setup with quick lever adjustments for cutting depth and veneer thickness
  • Reliable accuracy, eliminating the need for additional cleanup
  • Versatile usage for cutting corners in various materials

Applications:

  • Producing 2 x 8 right angle corners in veneer
  • Cutting paver corners
  • Creating lintel corners
The Higgins Jig is an exceptionally fast and safe tool for producing 2 x 8 right angle corners, paver corners, and lintel
corners. Setup for cutting is a simple two step process that involves no tools of any kind. First, the cutting depth is set by
adjusting the cutting head height to the thickness of the specified veneer. Second, the distance between the left side of
the jig is adjusted to the desired veneer thickness and then locked into place with the quick lever adjustment.
Once the jig is adjusted and the cutting head height locked in, the operator can switch between all three types of cuts
without any change to the cutting setup. The reliable accuracy of the Higgins Jig provides a consistent axis point on both
cuts and eliminates the need to clean out any residual material inside the corner veneer.
The Higgins Jig can also be used to cut veneer corners in river rock and other irregularly shaped materials.
Higgins Jig Instructional Sheet
Place Higgins jig on saw.
Place brick on table and turn
on saw.
Pull table back through brick
and flip brick vertically.
Adjust the height of the cutting head to
the desired depth and lock down.
Adjust jig to desired width.
Place left-hand on jig.
Make vertical cut.
Lock jig in place with orange lever.
Place right-hand on jig. Start cutting.
Corner Cutting Set-up (Jig Part# 169548)
Scan for Video
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
!
Place riser on table.
Attach riser plate to jig by tightening the
two screws.
Place hands in jig.
Cut other side.
Attach riser to jig by tightening the two bolts.
Adjust the height of the cutting head to the
desired depth and lock down.
Adjust jig to desired width.
Push table through the brick.
Place riser plate to inside of jig.
Place brick on riser and start saw.
Pull table back through brick and flip
brick.
Veener Cutting with Riser (Jig Part# 170158)
© 2019 MK Diamond Products, Inc. All Rights Reserved. Images and specifications are subject to change without notice. Jig & Riser Instruction Sheet Part # 169548-IS (02/19)
Lock jig in place with orange lever.
https://twitter.com/MKDiamondhttps://www.facebook.com/mkdiamondproducts
1315 Storm Parkway, Torrance, CA 90501 | P 800.421.5830 | F 310.539.5158
www.mkdiamond.com |
[email protected]
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
!
  • Page 1 1
  • Page 2 2

MK Diamond Higgins Jig Owner's manual

MK Diamond
Brand
MK Diamond
Model
Higgins Jig
Type
Owner's manual

MK Diamond Higgins Jig

The MK Diamond Higgins Jig is a fast and safe tool for producing precise right angle corners, paver corners, and lintel corners in various materials, including veneer, river rock, and other irregularly shaped materials.

Key Features and Benefits:

  • Simple, tool-free setup with quick lever adjustments for cutting depth and veneer thickness
  • Reliable accuracy, eliminating the need for additional cleanup
  • Versatile usage for cutting corners in various materials

Applications:

  • Producing 2 x 8 right angle corners in veneer
  • Cutting paver corners
  • Creating lintel corners
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents