American Standard 5'x42 User manual

Brand: American Standard

Model: 5'x42

Type: User manual

American Standard 5'x42" Whirlpool and Bathing Pool is an acrylic tub with a fiberglass reinforcement that features the EverClean® System, which incorporates a patented silver-ion additive to protect pipes from mold, mildew, algae, and fungus. It comes with six jets: two Ideal-flow jets and four body massage jets. The tub also has two silent air volume controls, a Quick Connect Safe-T-Heater connection system, and a deck-mounted electronic on/off with a 20-minute built-in timed safety shut-off. Its nominal dimensions are 60" x 42" x 21-1/2" (1524 x 1067 x 546mm) and it weighs 130 lbs.

H45

HERITAGE ™ 5' x 42"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

HERITAGE ™ 5' X 42"WHIRLPOOL

❏ 2805.028WC Whirlpool Featuring System II:

• Acrylic with berglass reinforcement

• EverClean

System

• Pre-leveled tub bottom

• Dual, molded-in arm rests

• Integral faucet deck area

• 2.1 HP, single speed, self-draining pump/motor

• Factory installed power cord and plug

• Six multi-directional and ow-adjustable

jets including:

- Two Ideal-ow jets

- Four body massage jets

• Deck-mounted electronic On/Off with 20 minute

built-in timed safety shut off and chrome bezel

• Two silent air volume controls

• Quick Connect Safe-T-Heater

connection system

• Factory installed and tested whirlpool system

❏ 2805.002 Bathing Pool

Nominal Dimensions:

1524 x 1067 x 546mm

(60" x 42" x 21-1/2")

Compliance Certications -

Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

American Standard whirlpools and air baths with

EverClean

incorporate a patented silver-ion

additive right into the circulation piping to protect

the pipes from mold, mildew, algae and fungus that

could cause deterioration or staining of the pipes.

SEE REVERSE FOR PRODUCT DIMENSIONS

AND SPECIFICATIONS

Revised 2/08

To Be Specied - Required:

❏ Color:

❏ Bath Filler: (specify nish)

❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ Safe-T-Heater*: 9075.120

❏ Heritage 5' Apron: 9160.2800 (specify color)

❏ Grab Bar Kit: 9822-100-one per kit (specify color)

❏ System II Control Bezel: 9861.100 (specify nish)

For color/nish availability and other faucet choices, please

see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water

temperature during operation. It will not heat cold water to

desired bathing temperature.

H46

HERITAGE™ 5' x 42"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

Revised 2/08

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP

OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL APRON 9160.2800 and GRAB BAR KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH

CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.

SUPPLY PIPING NOT INCLUDED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

1524mm

(60)

INTEGRAL

FITTING DECK

762mm

(30)

1067mm

(42)

OUTLINE OF CUTOUT

1486mm x 1029mm

(58-1/2 x 40-1/2)

PROVIDE ACCESS

TO PUMP FOR

SERVICE ON ALL

INSTALLATIONS

C/L OF

DRAIN

178mm x 381mm

(7 x 15)

FLOOR

CUTOUT

19mm

(3/4)

PUMP

305mm

(12)

152mm

(6)

1-1/2 N.P.T.

THREADS

ROUGH

FLOOR

INTEGRAL

FEET

SUPPORT

1-1/2 O.D.

TAILPIECE

546mm

(21-1/2)

495mm

(19-1/2)

133mm

(5-1/4)

64mm

(2-1/2)

121mm

(4-3/4)

LEVELING STRINGER

NOT FOR SUPPORT

C/L OF

OVERFLOW

51mm(2)

SAFE-T-HEATER

REMOVABLE

BLANK

GENERAL SPECIFICATIONS FOR 2805 WHIRLPOOL

60 x 42 x 21-1/2 In. (1524 x 1067 x 546mm)

130 Lbs. (59 Kg.)

689 Lbs. (310 Kg.)

64 Gal. (243 L)

52 Gal. (197 L)

43 x 22 In. (1092 x 559mm)

55 x 35-1/2 In. (1397 x 902mm)

15 In. (381mm)

39 Lbs./Sq.Ft. (191 Kgs./Sq.m)

27.8

47.4

2.1 HP, 15.6 AMPS ,120V.SYSTEM II PUMP

WHIRLPOOL ELECTRICAL SPECIFICATIONS

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

1524mm

(60)

INTEGRAL

FITTING DECK

762mm

(30)

1067mm

(42)

OUTLINE OF CUTOUT

1486mm x 1029mm

(58-1/2 x 40-1/2)

C/L OF

DRAIN

178mm x 381mm

(7 x 15)

FLOOR

CUTOUT

19mm

(3/4)

305mm

(12)

152mm

(6)

1-1/2 N.P.T.

THREADS

ROUGH

FLOOR

INTEGRAL

FEET

SUPPORT

1-1/2 O.D.

TAILPIECE

546mm

(21-1/2)

495mm

(19-1/2)

133mm

(5-1/4)

64mm

(2-1/2)

121mm

(4-3/4)

LEVELING STRINGER

NOT FOR SUPPORT

C/L OF

OVERFLOW

51mm(2)

GENERAL SPECIFICATIONS FOR 2805 BATHING POOL

60 x 42 x 21-1/2 In. (1524 x 1067 x 546mm)

115 Lbs. (52 Kg.)

674 Lbs. (306 Kg.)

64 Gal. (243 L)

43 x 22 In. (1092 x 559mm)

55 x 35-1/2 In. (1397 x 902 mm)

15 In. (381mm)

39 Lbs./Sq.Ft. (191 Kgs./Sq.m)

27.8

47.4

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

American Standard 5'x42 User manual

American Standard 5'x42 User manual

American Standard 5'x42 User manual

Related papers

Other documents