ZANUSSI
P R O F E S S I O N A L
HOOD TYPE DISHWASHERS
TOP VERSION WITH CWS
504237
YELLOW CUTLERY CONTAINER 2 2
BASKET FOR 48 SMALL CUPS/24 CUPS-BLUE 1 1
BASKET FOR 18 DINNER PLATES 240MM-YELLOW 1 1
INCLUDED ACCESSORIES
Convertible to 230 V / 3 / 50 Hz 230 V / 1+N / 50 Hz;
230 V / 3 / 50 Hz
Supply voltage 400 V, 3N, 50 400 V, 3N, 50
Net weight - kg. 111.5 128
Noise level - dBA <68 <63
total power 9.9 9.9
Rinse pump 0.35 0.35
Power - kW
Boiler elements - kW 9 9
Boiler capacity - lt. 12 12
water consumption - lt./cycle 3 3
temperature during rinse - °C 84 84
duration - sec. 12 12
Hot rinse cycle
electrical elements - kW 3 3
power pump - kW 0.8 0.8
tank capacity - lt. 40 40
temperature -°C 55-65 55-65
Washing cycle
height 409 409
depth 560 560
width 590 590
Cell dimensions - mm
height 1507 1507
depth 815 815
width 735 735
External dimensions - mm
Door/hood thickness Single Double
Basket capacity/h 67 67
Dishes capacity/h 1200 1200
Duration cycles - sec. 54/90/150/inf 54/90/150/inf
N° of cycles 4 4
Rinse aid dispenser l l
Rinse box l l
Rinse Booster Pump l l
Drain pump l l
hardness - °f <48 <48
temperature - °C 50 50
Water supply
ZHTAWS
504237
ZHTAIWS
504239
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The range consists of 2 models,
single skin or double skin insulated
hood with continuous water softener
(CWS) offering the possibility to
wash plates, trays, cutlery, glasses
and cups and have a capacity of
1200 plates per hour (67
baskets/hour).
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� All models are ACTIVE and feature the
Guaranteed Rinse System. The rinsing is
always at a temperature of 84°C throughout
the rinse cycle thus guaranteeing rinse
quality of the tableware in line with current
international standards. The atmospheric
boiler guarantees a constant high rinse
temperature independent from the network
water pressure (with a minimum of 0.5 bar).
� 4 second (variable) pause after washing
and before rinsing ensures that no drops of
unclean water will fall on the clean items at
the end of the rinsing cycle.
� 4 different dishwashing cycles: glass and
lightly soiled items (1st cycle of 54 seconds),
standard soiled items (2nd cycle of 90
seconds), heavy soiled items (3rd cycle of
150 seconds) and the continuous program.
� Built-in drain pump allows water discharge
in all conditions.
� Simple control panel with digital
thermometers, indicating both wash & rinse
temperatures.
* Declared actual cycle duration times can extend
when water supply temperature is lower than
indicated.
HOOD TYPE DISHWASHERS
TOP VERSION WITH CWS
EADB2 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
YELLOW CUTLERY CONTAINER 864242 864242
STAINLESS STEEL INLET HOSE KIT 864016 864016
RINSE AID LEVEL PROBE KIT FOR UC+HT DW 864005 864005
KIT TO MEASURE TOTAL/PART.WATER HARDNESS 864050 864050
KIT HACCP EKIS 922166 922166
KIT 8 PLASTIC BOXES FOR CUTLERY-YELLOW 780068 780068
KIT 4 PLASTIC BOXES FOR CUTLERY-YELLOW 865574 865574
INTEGRATED HACCP KIT FOR UC, HT AND POTW 864001 864001
HACCP PRINTER KIT FOR UC, HT AND POTW 864002 864002
DRAIN PUMP KIT FOR 50HZ DISHWASHERS 864199 864199
DETERGENT PUMP KIT 864218 864218
DETERGENT LEVEL PROBE KIT FOR UC+HT DW 864004 864004
COVER GRID FOR SMALL/LIGHT ITEMS IN RACK 867016 867016
BRASS INLET VALVE KIT FOR UC AND HT 864000 864000
BASKET SEMI-PROFESSIONAL 500X500X190MM 867024 867024
BASKET FOR BULK CUTLERY-BROWN 867009 867009
BASKET FOR 6 TRAYS 530X370MM-RED 866743 866743
BASKET FOR 48 SMALL CUPS/24 CUPS-BLUE 867007 867007
BASKET FOR 18 DINNER PLATES 240MM-YELLOW 867002 867002
BASKET FOR 12 SOUP BOWLS 240MM-GREEN 867000 867000
BASKET F.16 VERTIC.GLASSES (H70MM)-BLUE 867023 867023
ZHTAWS
504237
ZHTAIWS
504239
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
� Electronic board with digital display
incorporating fault diagnosis system, number
of cycles counter and number of drain cycles
counter.
� Fault auto-diagnosis system.
� Double skinned insulated wall (available
only for code 504235) ensures a low noise
level and a reduction in heat loss from the
machine.
� An effective rinse system that uses only 3
litres of clean hot water per rack to ensure
lower running costs (in energy, water and
chemical consumption).
� Large deep drawn wash tank and internal
wash area with round corners and no pipes
to avoid dirt built-up.
� Easily removable washing and rinsing
arms, filters and rack support.
� All the machines have smooth surfaces
and a wash tank with rounded corners to
facilitate cleaning.
� Safety devices prevent the hood from
suddenly closing in case of spring breakage,
thus avoiding operator injury.
� The fully automatic self-cleaning cycle
avoids the risk of bacteria proliferation.
� The self-draining wash pump facilitates
the evacuation of stagnant water after long
periods of inactivity to ensure a higher level
of hygiene.
� Load bearing frame height adjustable feet,
hood, tank, washin and rinsing arms,jets and
screws in 304 AISI stainless steel to ensure
long term reliability.
� High efficiency air gap (class A) in water
inlet circuit to avoid water being siphoned
back into the network as a result of a sudden
drop in main pressures.
� 304L stainless steel boiler with higher
welding protection improves the resistance
against corrosion with chlorinated water
� PVC water supply hose with metal
connections resistant to high water pressure.
� The IPX5 water protection.
� Pre-arranged for on-site HACCP
implementation and Energy Management
device.
� The incorporated Soft Start feature offers
additional protection to delicate items such
as glassware and crockery and increases
wash pump reliability.
� Three phase electrical connection,
convertible on-site.
� Suitable to be connected to specific
pre-wash tabling, service entry and exit
tabling and roller conveyor tabling – included
in ZANUSSI Professional Handling System
range.
� The machine will start with the close of the
hood and stop when the hood is opened
� Open hood on the back side to prevent
steam blasts to the operator.
� All machines are pre-arranged to accept
external dispensers.
� 97% recyclable by weight.
� CFC free packaging.
� Low noise level.
� Developed and produced in ISO 9001 and
ISO 14001 certified factory.
� In compliance with CE requirements.
CONTINUOUS WATER SOFTENER:
� Two resin containers automatically
alternate between softening and regenerating
to provide non-stop washing.
� Regeneration activated automatically – no
operator intervention.
� 100% of rinse water softened with no
pressure drop during rinse to ensure full
detergent removal and perfect rinse quality of
items.
� Comfortable front loading of regeneration
salt.
HOOD TYPE DISHWASHERS
TOP VERSION WITH CWS
EADB2 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
XR - Connection for detergent dispenser l l
HWI - Hot water inlet G 3/4" G 3/4"
EQ - Equipotential screw l l
EI - Electrical connection 400 V, 3N, 50 400 V, 3N, 50
D - Water drain 40mm 40mm
ZHTAWS
504237
ZHTAIWS
504239
LEGEND
504237, 504239
-
1
-
2
-
3
Zanussi 504239 User manual
- Category
- Dishwashers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Electrolux 504234 User manual
-
-
-
-
Metos HOOD 130S Owner's manual
-
-
-
-
-