Tannoy YOKE HORIZONTAL VX 12.2 Quick start guide

YOKE HORIZONTAL VX 12.2
Tannoy
Brand
Tannoy
Model
YOKE HORIZONTAL VX 12.2
Category
Soundbar speakers
Type
Quick start guide

This manual is also suitable for

VX Yoke Accessory
Horizontal and Vertical Yoke Accessory Bracket for VX 15,
VX 12.2, VX 12/VX 12.2 (-WH), VX 8/VX 8.2 (-WH), VX 12 (-WH),
VX 8 (-WH) and VX 5.2/VX 6 (-WH)
LEGAL DISCLAIMER
LIMITED WARRANTY
Important Safety
Instructions
Instrucciones de
seguridad
Terminals marked with
this symbol carry
electrical current of
su cient magnitude to constitute risk
of electric shock. Use only high-quality
professional speaker cables with ¼" TS
or twist-locking plugs pre-installed.
Allother installation or modi cation
should be performed only by
quali edpersonnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated
dangerous voltage inside the enclosure
- voltage that may be su cient to
constitute a risk ofshock.
This symbol, wherever it
appears, alerts you to
important operating and
maintenance instructions in the
accompanying literature. Please read
themanual.
Caution
To reduce the risk of
electric shock, do not
remove the top cover (or the rear
section). No user serviceable parts inside.
Refer servicing to quali edpersonnel.
Caution
To reduce the risk of
re or electric shock, do
not expose this appliance to rain and
moisture. Theapparatus shall not
be exposed to dripping or splashing
liquids and no objects  lled with
liquids, such as vases, shall be placed
on the apparatus.
Caution
These service instructions
are for use by quali ed
service personnel only. Toreduce
the risk of electric shock do not
perform any servicing other than that
contained in the operation instructions.
Repairshave to be performed by
quali ed servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus
near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat registers,
stoves, or other apparatus (including
ampli ers) that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two blades
with one wider than the other.
A grounding-type plug has two blades
and a third grounding prong. The wide
blade or the third prong are provided
for your safety. Ifthe provided plug
does not  t into your outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
11. Use only attachments/accessories
speci ed by themanufacturer.
12. Use only with
the cart, stand,
tripod, bracket, or
table speci ed by
the manufacturer,
orsold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14. Refer all servicing to quali ed
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has beendropped.
15. The apparatus shall be connected
to a MAINS socket outlet with a
protective earthing connection.
16. Where the MAINS plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.
17. Correct disposal of
this product: This
symbol indicates that
this product must not
be disposed of with
household waste, according to the
WEEE Directive (2012/19/EU) and your
national law. This product should be
taken to a collection center licensed for
the recycling of waste electrical and
electronic equipment (EEE).
The mishandling of this type of waste
could have a possible negative impact
on the environment and human health
due to potentially hazardous
substances that are generally
associated with EEE. At the same time,
your cooperation in the correct disposal
of this product will contribute to the
e cient use of natural resources. For
more information about where you can
take your waste equipment for
recycling, please contact your local city
o ce, or your household waste
collection service.
18. Do not install in a con ned space,
such as a book case or similar unit.
19. Do not place naked  ame
sources, such as lighted candles,
on the apparatus.
20. Please keep the environmental
aspects of battery disposal in mind.
Batteries must be disposed-of at a
battery collection point.
21. Use this apparatus in tropical
and/or moderate climates.
MUSIC Group accepts no liability for
any loss which may be su ered by
any person who relies either wholly
or in part upon any description,
photograph, or statement contained
herein. Technical speci cations,
appearances and other information
are subject to change without notice.
All trademarks are the property of
their respective owners. MIDAS,
KLARK TEKNIK, LAB GRUPPEN,
LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA and DDA are
trademarks or registered trademarks of
MUSIC Group IP Ltd. © MUSIC Group IP
Ltd. 2016 All rights reserved.
For the applicable warranty terms and
conditions and additional information
regarding MUSIC Group’s Limited
Warranty, please see complete details
online at music-group.com/warranty.
Las terminales marcadas
con este símbolo
transportan corriente
eléctrica de magnitud su ciente como
para constituir un riesgo de descarga
eléctrica. Utilicesolo cables de altavoz
profesionales y de alta calidad con
conectores TS de 6,3 mm o de bayoneta
pre jados. Cualquier otra instalación o
modi cación debe ser realizada
únicamente por un técnicocuali cado.
Este símbolo, siempre que
aparece, leadvierte de la
presencia de voltaje
peligroso sin aislar dentro de la caja;
estevoltaje puede ser su ciente para
constituir un riesgo dedescarga.
Este símbolo, siempre que
aparece, leadvierte sobre
instrucciones operativas y
de mantenimiento que aparecen en la
documentación adjunta. Por favor,
leaelmanual.
Atención
Para reducir el riesgo de
descarga eléctrica, no
quite la tapa (olaparte posterior).
Nohay piezas en el interior del equipo
que puedan ser reparadas por el
usuario. Sies necesario, póngase en
contacto con personal cuali cado.
Atención
Para reducir el riesgo
de incendio o descarga
eléctrica, no exponga este aparato a la
lluvia, humedad o alguna otra fuente
que pueda salpicar o derramar algún
líquido sobre el aparato. Nocoloque
ningún tipo de recipiente para líquidos
sobre elaparato.
Atención
Las instrucciones
de servicio deben
llevarlas a cabo exclusivamente
personal cuali cado. Paraevitar el
riesgo de una descarga eléctrica,
no realice reparaciones que no se
encuentren descritas en el manual de
operaciones. Lasreparaciones deben
ser realizadas exclusivamente por
personalcuali cado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas
las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca
del agua.
6. Limpie este aparato con un
paño seco.
7. No bloquee las aberturas
de ventilación. Instale el equipo
de acuerdo con las instrucciones
del fabricante.
8. No instale este equipo cerca de
fuentes de calor tales como radiadores,
acumuladores de calor, estufas u otros
aparatos (incluyendo ampli cadores)
que puedan producir calor.
9. No elimine o deshabilite nunca
la conexión a tierra del aparato o del
cable de alimentación de corriente.
Unenchufe polarizado tiene dos polos,
uno de los cuales tiene un contacto
más ancho que el otro. Una clavija
con puesta a tierra dispone de tres
contactos: dos polos y la puesta a
tierra. El contacto ancho y el tercer
contacto, respectivamente, son los que
garantizan una mayor seguridad. Si el
enchufe suministrado con el equipo
no concuerda con la toma de corriente,
consulte con un electricista para
cambiar la toma de corriente obsoleta.
10. Coloque el cable de suministro de
energía de manera que no pueda ser
pisado y que esté protegido de objetos
a lados. Asegúrese de que el cable de
suministro de energía esté protegido,
especialmente en la zona de la clavija y
en el punto donde sale del aparato.
11. Use únicamente los dispositivos
o accesorios especi cados por
el fabricante.
12. Use
únicamente la
carretilla,
plataforma,
trípode, soporte o
mesa especi cados
por el fabricante o suministrados junto
con el equipo. Altransportar el equipo,
tenga cuidado para evitar daños y
caídas al tropezar con algún obstáculo.
13. Desenchufe el equipo durante
tormentas o si no va a utilizarlo durante
un periodo largo.
14. Confíe las reparaciones
únicamente a servicios técnicos
cuali cados. La unidad requiere
mantenimiento siempre que haya
sufrido algún daño, si el cable de
suministro de energía o el enchufe
presentaran daños, sehubiera
derramado un líquido o hubieran caído
objetos dentro del equipo, si el aparato
hubiera estado expuesto a la humedad
o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún
golpe o caída.
15. Al conectar la unidad a la toma de
corriente eléctrica asegúrese de que
la conexión disponga de una unión
atierra.
16. Si el enchufe o conector
de red sirve como único medio
de desconexión, éste debe ser
accesiblefácilmente.
2 3Quick Start GuideVX Yoke Accessory
Page is loading ...
Page is loading ...
Page is loading ...
Yoke Horizontal
For use with VX 5.2, VX 6 and VX 8 models.
For use with VX 8.2, VX 12, VX 12.2 and VX 15.
Yoke Vertical
For use with VX 8.2, VX 12, VX 12.2 and VX 15.
For use with VX 8 and VX 8.2.
11 Quick Start Guide10 VX Yoke Accessory
Dimensions Horizontal
Yoke Horizontal VX 12.2
Yoke Horizontal VX 15
TOP
FRONT
SIDE
115 [4.5]
650 [25.6]
806 [31.7]
780 [30.7]
285 [11.2]
240 [9.4]
390 [15.4]
4-M10 [0.4]
180 [7.1]
56 [2.2]
white brackets don’t
include nut caps.
5
-Ø11 [Ø0.4]
Yoke Horizontal VX 12
Yoke Horizontal VX 8.2
616 [24.3]
115 [4.5]
500 [19.7]
5-Ø11.0 [Ø0.43]
320 [12.6]
56 [2.2]
180 [7.1]
FRONT
SIDE
TOP
21 [0.8]
TOP
FRONT
SIDE
115 [4.5]
400 [15.7]
486 [19.1]
180 [7.1]
390 [15.4]
56 [2.2]
240 [9.4]
285 [11.2]
4-M10 [0.4]
white brackets don’t
include nut caps.
512 [20.2]
5-Ø11 [Ø0.4]
600 [23.6]
115 [4.5]
500 [19.7]
616 [24.3]
205 [8.1]180 [7.1]
56 [2.2]
658 [25.9]
56 [2.2]
40 [1.6]
400 [15.7]
590 [23.2]
606 [23.9]
295 [11.6]
90 [3.5]
320 [12.6]
CL
12 V
X Yoke Accessory 13 Quick Start Guide
Yoke Horizontal VX 5.2/VX 6
Yoke Vertical VX 15
Yoke Vertical VX 12/VX 12.2 (-WH)
white brackets don’t
include nut caps.
396 [15.6]
370 [14.6]
455 [17.9]
350 [13.8]
40 [1.6]
115 [4.5]
4-M10 [0.4]
180 [7.1]
3-Ø11 [Ø0.4]
Yoke Horizontal VX 8
40 [1.57]
230 [9.06]
115 [4.53]
14.1 [0.56]
Ø
11.0 [Ø0.43] TYP
210 [8.27]
404 [15.91]
FRONT
TOP
SIDE
Dimensions Horizontal Dimensions Vertical
115 [4.5]
518 [20.4]
476 [18.7]
300 [11.8]180 [7.1]
40 [1.6]
495 [19.5]
466 [18.3]
410 [16.1]
390 [15.4]
90 [3.5]
CL
350 [13.8]
35 [1.4]
6.5 [0.3]
190 [7.5]
210 [8.3]
340 [13.4]
334 [13.1]
40 [1.6]
CL
CL
115 [4.5]
3-Ø11 [Ø0.4]
367.8 [14.5]
W.L.L: 10 kg/22 lbs
(10:1)
14 V
X Yoke Accessory 15 Quick Start Guide
Yoke Vertical VX 8/VX 8.2
243 [9.6]
311 [12.2]
295 [11.6]
14.0 [0.55]
Ø
11.0 [Ø0.43] TYP
115 [4.5]
40 [1.6]
314 [12.4]
FRONT SIDE
TOP
Rigging and Safety Procedures
The TANNOY Professional hardware covered in this guide has been designed to o er quick, simple, cost e ective and secure solutions for
mounting speci c TANNOY Professional loudspeakers. This hardware has been designed and manufactured with a high safety load factor
for its speci c role. To ensure the safest possible use of the hardware covered in this guide, it must be assembled in strict accordance with
the instructions speci ed. The information in these Quick Start Guides relating to the assembly and the safe use of these accessories must
be understood and followed.
The installation of TANNOY Professional loudspeakers – using the dedicated hardware – should carried out only by fully quali ed
installers, in accordance with all the required safety codes and standards that apply at the place of installation.
WARNING: As the legal requirements for mounting, suspending, hanging,  ying or rigging equipment change from country to country,
please consult your local safety standards o ce before installing any product. We also recommend that you thoroughly check any laws
and bylaws prior to installation.
TANNOY Professional hardware has been designed for use with speci c TANNOY Professional loudspeakers, and is not designed or
intended for use with any other TANNOY Professional products, or any other devices. Using TANNOY Professional hardware for any
purpose other than that indicated in this guide is considered to be improper use. Such use can be very dangerous: overloading, modifying,
damaging, or assembling in a manner other than that clearly stated in the Operation will compromise safety. The component parts of any
TANNOY Professional hardware device must only be assembled using the accessory kits supplied and in strict compliance with the Quick
Start Guide. The use of other accessories or non-approved methods of assembly may result in an unsafe hardware system by reducing the
load safety factor. Welding, or any other method of permanently  xing hardware components together or to the integral  xing points in
the cabinet, should never be used.
Whenever a TANNOY Professional loudspeaker is  xed to a surface using a TANNOY Professional hardware device, the installer must
ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely, and securely
attached both to the loudspeaker and also to the surface in question, in accordance with the Quick Start Guide, using only the xing holes
provided as standard and covered in the manual. Secure  xings to the building structure are vital. Seek help from architects, structural
engineers or other specialists if in any doubt. All loudspeakers  own in theatres, nightclubs, conference centres or other places of work
and entertainment must be provided with an independent, correctly rated and securely attached secondary safety restraint in addition
to the principal hardware device. This secondary safety restraint must prevent the loudspeaker from dropping more than 150 mm (6")
should the principal hardware device fail.
Dimensions Vertical
16 VX Yoke Accessory 17 Quick Start Guide
Other important information
1. Register online.
Pleaseregister your new MUSIC Group
equipment right after you purchase it by
visiting tannoy. com. Registeringyour
purchase using our simple online
form helps us to process your repair
claims more quickly and e ciently.
Also, read the terms and conditions of
our warranty, ifapplicable.
2. Malfunction. Should your
MUSICGroup Authorized Reseller not be
located in your vicinity, you may contact
the MUSIC Group Authorized Ful ller for
your country listed under “Support” at
tannoy. com. Shouldyour country not be
listed, pleasecheck if your problem can be
dealt with by our “OnlineSupport” which
may also be found under “Support” at
tannoy. com. Alternatively, please submit
an online warranty claim at tannoy. com
BEFORE returning theproduct.
3. Power Connections.
Beforeplugging the unit into a power
socket, please make sure you are using the
correct mains voltage for your particular
model. Faulty fuses must be replaced
with fuses of the same type and rating
withoutexception.
Important information
18 V
X Yoke Accessory 19 Quick Start Guide
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Tannoy YOKE HORIZONTAL VX 12.2 Quick start guide

YOKE HORIZONTAL VX 12.2
Tannoy
Brand
Tannoy
Model
YOKE HORIZONTAL VX 12.2
Category
Soundbar speakers
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents