Clam Corp 8200 is a portable ice shelter designed for use while ice fishing. The shelter is easy to set up and take down, and it can be transported easily on a sled or snowmobile. The shelter is made of a durable, waterproof material that will protect you from the elements, and it features a large door for easy access. The shelter also has several vents to provide ventilation and prevent condensation from building up inside.
Here are some of the features and possible use cases of the Clam Corp 8200:
- Easy to set up and take down: The shelter can be set up in minutes by one person. It is also easy to take down and store away when you are finished using it.
Clam Corp 8200 is a portable ice shelter designed for use while ice fishing. The shelter is easy to set up and take down, and it can be transported easily on a sled or snowmobile. The shelter is made of a durable, waterproof material that will protect you from the elements, and it features a large door for easy access. The shelter also has several vents to provide ventilation and prevent condensation from building up inside.
Here are some of the features and possible use cases of the Clam Corp 8200:
- Easy to set up and take down: The shelter can be set up in minutes by one person. It is also easy to take down and store away when you are finished using it.
- ITEM 8200 - CLAM 2000 - PORTABLE ICE SHELTER -
SPECIFICATIONS
Set-Up
Height: 60”
Width: 72”
Length: 48”
Collapsed
Height: 6”
Width: 72”
Length: 36”
Weight: 45 Lbs.
Congratulations on your recent purchase of a Clam Portable Ice Shelter. The following is
included in the booklet:
• Set-Up Instructions
• Safety Instructions
• Warranty Information
ONCE USED THIS SHELTER CANNOT BE RETURNED TO THE STORE. IF YOU HAVE A
WARRANTY CLAIM CONTACT CLAM CORPORATION CUSTOMER SERVICE DIRECTLY AT:
Clam Corporation, Inc.
Attn: Customer Service
15600 28th Avenue North
Minneapolis, MN 55447
Hrs: 8am–5pm Central Standard Time
Phone: 763-231-4120
Fax: 763-231-4121
Email: [email protected]
Warranty does not cover cracked windows, tent tears, broken or bent hoops due to high wind,
weather conditions, unattended use, or during the course of normal wear.
2
- SET-UP INSTRUCTIONS -
• Unfold the unit and unzip the doors at both ends. (Tent not shown installed for clarity).
• Through the doorway of one end, grasp the Hoop Pole that pivots near the corresponding end and lift, sliding
the Hoop Pole up until it locks into the position. (You should hear the Spring Buttons of the Lower Legs
engage the holes of the Hoop Pole.)
• Go around to the other doorway and do the same with the Hoop Pole located on the opposite end.
101696 Tent (not shown)
101682 Flexible Rod
101153 Hoop Pole
101168 Latch Clip
Spring button
101152 Lower Leg
101150 Hole Cover
101116 Molding
3
- SET UP INSTRUCTIONS -
• Locate the Flexible Rods and unfold them into the straightened position.
• Go into the unit and slide one end of a Flexible Rod into one of the corner pockets located on the corners of
the Hoop Tubes.
• Slide the other end of the Flexible Rod into a pocket located on the opposite Hoop Tube, diagonally across
the shelter. (The Rods will form an “X” when assembled).
• Do the same with the other Flexible Rod and then Velcro the two Flexible Rods together where they cross
with the Velcro attached to the center of the tent roof. You are now ready to fish!!
Flexible Rod
Rod Pocket
SAFETY INSTRUCTIONS
- TAKE DOWN INSTRUCTIONS -
• Remove the Flexible Rods and fold them up. Place them on the side of the Floor Half without the bucket
impressions. (When used, the bucket impressions help steady a bucket while towing in the collapsed
position).
• Collapse both Hoop Tube assemblies and rotate them down onto their respective floors.
• Now fold the Floor Half with the bucket impressions onto the other. Tuck the tent material between the Floor
Halves so that the material is protected.
• Attach the provided Latch Clips to hold the shelter in the closed portable position. (The Eyelets of the Latch
Clips may be used for roping down gear on top of the unit while on the go.)
Latch Clip Eyelet
4
- SAFETY INSTRUCTIONS -
Please fully understand and follow all safety instructions outlined in this booklet. Failure to do so could result
in severe injury or death.
Do not use open flame heaters in your ice shelter. Injury or death may result from fire if tent fabric is exposed
to open flame. The tent is not fireproof, but the fabric is treated with a fire retardant that meets CPAI-84
specifications. Application of any foreign substance may render the flame retardant properties ineffective. Ice
Armor fabric will melt when contact is made with hot surfaces (i.e., heaters).
BEFORE USING A HEATER, OPEN ALL VENTS FOR CROSS VENTILATION.
Death from asphyxiation may result from use of oxygen depleting heaters. Open all vents for fresh air
ventilation.
• Never leave shelter unattended when set up.
• Due to the increase in traffic (snowmobiles, autos, etc.) on area lakes, ice fishing can be hazardous at night. If
you choose to fish at night or in poor visibility conditions, be sure to take precautions with lights or reflectors
to show drivers your whereabouts. Night time: exterior reflectors must be visible to reduce risk of collisions.
- WARRANTY INFORMATION -
Clam Corporation, Inc. warrants to the original retail purchaser that all Clams are free from manufacturer’s
defects for one (1) year from the date of the original purchase. Warranty does not cover cracked windows, tent
tears, broken or bent hoops due to high wind weather conditions or unattended use. Clam Corporation will
replace or repair any part found defective within the one (1) year time limit. All parts must be returned to Clam
Corporation, Inc. Before returning any parts, you must first call or write and acquire a return authorization. All
returns must be returned postage-prepaid and include the original cash register receipt (date and purchase
price).
To obtain a return authorization, call or write:
Clam Corporation, Inc.
Attn: Customer Service
15600 28th Avenue North
Minneapolis, MN 55447
Phone: 763-231-4120
Fax: 763-231-4121
Email: [email protected]
This warranty does not apply to any Ice Shelter that has been subjected to an accident, improper installation,
modification, adjustment, repair, misuse, misapplication, neglect, including but not limited to improper
maintenance, or use of unauthorized parts or attachments.
- LIMITATION OF LIABILITY -
It is expressly understood that Clam Corporation Inc, liability for its products, whether due to breach of warranty,
negligence, strict liability, or otherwise, is limited to the repair of the product as stated above. Clam
Corporation, Inc. is not liable for any injury, loss, damage, or expense, whether direct or consequential,
including but not limited to loss of use, income, profit, or damage to material arising in connection with the sale,
installation, use of, inability to use, or the repair or replacement of Clam Corporation, Inc. products. Clam
Corporation, Inc. reserves the right to make alterations or modifications in its products at any time, which in its
opinion, may improve the performance and efficiency of the product. It shall not be obligated to make such
alterations or modifications to products already in service.
-
1
-
2
-
3
-
4
Clam Corp 8200 User manual
- Type
- User manual
- This manual is also suitable for
Clam Corp 8200 is a portable ice shelter designed for use while ice fishing. The shelter is easy to set up and take down, and it can be transported easily on a sled or snowmobile. The shelter is made of a durable, waterproof material that will protect you from the elements, and it features a large door for easy access. The shelter also has several vents to provide ventilation and prevent condensation from building up inside.
Here are some of the features and possible use cases of the Clam Corp 8200:
- Easy to set up and take down: The shelter can be set up in minutes by one person. It is also easy to take down and store away when you are finished using it.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Clam Corp 8836 User manual
-
-
-
-
-
-
-
-
Clam Corp 8280 User manual
-
Clam 8236 User manual
Other documents
-
-
-
-
Barclay Products 4120-72-PB Installation guide
-
-
Clam Customer Quick-Set Escape 9879 Installation guide
-
Clam Customer WP-2PK-9896 User manual
-
none YSLH06 User guide
-
Polar Trailer 8233 Operating instructions
-
Polar 8232 User manual
