3
PHONE CONNECTION SETTINGS
You must ensure that the proper connection setting is selected on your
phone when connecting your phone to a computer via a USB cable. The
following procedure will help you change your phone settings to the
correct connection mode depending on your application.
Important Please make sure to select your phone setting BEFORE
you connect your USB cable to your phone.
When connecting your phone and computer via the USB
cable, you may not be able to change the connection
setting on the phone once connected. When you connect
your phone and your computer with the USB cable, you
may not be able to change the phone connection setting
when the phone is attached. This is necessary to avoid
data loss or memory card corruption if the connection is
lost during data transfer.
HOW TO CHANGE YOUR PHONE CONNECTION SETTING
The following is a general procedure on changing the connection
settings. Please refer to your phone’s user manual for more detailed
steps for your particular phone.
1 Press the Center key ( ) on your keypad.
2 From the Main menu, select Settings > Connections.
3 Select the phone connection setting you wish to use:
Media Synchronization - when syncing downloaded content
from ripped CD's, or purchased content from Windows Media
DRM-protected music files from supported online stores (such
as Urge, Yahoo, and Napster) with Windows Media Player.
Memory Card - when syncing your phone directly with your
computer, or if you would like to manage specific music content
between your phone or memory card to your computer.