PYLE Audio PSS6 User manual

Brand: PYLE Audio

Model: PSS6

Category: AV extenders

Type: User manual

This manual is also suitable for

PSS4

HIGHPOWERSTEREOSPEAKERSELECTOR

MODEL:PSS4/PSS6

www.pyleaudio.com

ThankyouforpurchasingPYLEPROMulti-SpeakerSelectors.Itletsyouconnectup

tofour(PSS4)orsix(PSS6)separatepairsofspeakerstoyourstereoreceiver/amplifier.

Thecontrolcenterisespeciallyconvenientifyouhavespeakersetsindifferentrooms

andwanttoturnthemonandoffindependently.Youcanenjoytheconvenienceand

flexibilityoflisteningtomultiplespeakerpairssimultaneously.

Thecontrolcenterletsyouuseonetofour(PSS4)orsix(PSS6)setsofspeakersata

time,andisdesignedtooperatewithastereoreceiver/amplifierthathasamaximumof

100wattsperchannel,andwithspeakersystemsthathaveaminimumimpedanceof8

ohms(see“ImpedanceChart”onpage5)

PREPARATIONS

•UsethePYLEPROSpeakerSelectorsonlywithamplifiersratedat100wattsper

channelorless.

•YourPYLEPROSpeakerSelectorisdesignedtoacceptanysizecableupto14gauge

non-terminatedspeakerwire.Ifyou’reusingnon-terminatedspeakerwire,donotuse

anyspeakerwirethatislargerthan14gauge.Thelowerthegaugenumber,thelarger

thecable(e.g.,12gaugeislargerinactualphysicalsizethan14gauge).

•Donothooktheoutputsofoneselectorintotheinputsofanotherspeakerselector

together.

MAKINGTHECONNECTIONS

Thecontrolcenterdividesthepowerfromyourreceiver/amplifierdifferentlytoits

speakerterminals.(Thisisespeciallynoticeablewhenyouconnectonlyonepairof

speakers.Ifyouconnectmorethanonepairofspeakers,see“ImpedanceChart”on

page5toselectorthebestterminalstoconnect.)Forthebestperformance,makethe

connectionsbasedonhowfrequentlyyouuseeachsetofspeakers.

Cautions:Toavoiddamagingyourspeakersorreceiver/amplifier:

•Besureyourreceiver/amplifier’spoweristurnedoffbeforeyoumaketheconnections.

•Neverletthespeakerwire’sbareendstoucheachotherortheadjacentterminalsonthe

controlcenter.

•Donotconnectmorethanonepairofsepakerstoeachsetofterminals.

PressopenthedesiredSPKterminalsonthecontrolcenter.Insertthespeakers’positive

(+)wiresinthepositive(red)terminals,andnegative(

)wiresintothenagative(black)

terminals,accordingtotherespectiveL(left)andR(right)terminals.Thenpressthetabs

toclosethem.

PressopentheAMPterminalsonthecontrolcenter,theninsertyourreceiver/amplifier’s

positive(+)wiresintothepositive(red)terminals,andnegative(

)wiresinthenagative

terminals.Thenpressthetabstoclosethem.

Notes:

•Ifyourreceiver/amplifierhasmorethanonesetofspeakerterminal(AandB),connect

onlyoneortheothertothecontrolcenter.

•Forthebestresults,werecommend14-gauge,twoconductorspeakerwire(not

supplied)formostconnections.Ifyouplantolocatedthespeakersfurtherthan80feet

fromthecontrolcenter,useaheaviergaugeofwire.

OPERATION

Caution:Toavoiddamagingyourreceiver/amplifier,setitsvolumetothelowestsetting

beforechangingthecontrolcenter’ssettings.

Toturnonapairofspeakersconnectedtothecontrolcenter,simplypressinthedesired

button.Forexample,toturnonthesetofspeakersconnectedtoSPKA,pressA.

Toturnoffapairofspeakers,pressthebuttonagainsoitisinthe“out”position.

Note:ifnospeakersareconnectedtoasetofterminals,donotpressinthecorresponding

controlbutton.

IMPEDANCECHART

Impedanceisameasurementoftheloadplacedonyourreceiver/amplifierbythe

speakers.Theloadplacedonyourreceiver/amplifierfromthtecontrolcenterwill

varydependingonhowmanypairsofspeakersyouturnonatonetime,andonwhich

speakersyouturnon.Thechartbelowshowstheimpedanceforallpossiblecombinations

of8-ohmspeakers.

PSS6

Speaker Sets On Impedance (Ω)

A, B, C, D, E or F 8

A+B, A+C, A+D

A+E, A+F, B+C

B+D, B+E, B+F

C+D, C+E, C+F, E+F

A+B+C, A+B+D, A+B+E

A+B+F, A+C+D, A+C+E

A+C+F, A+D+E, A+D+F

A+E+F, B+C+D, B+C+E

B+C+F, B+D+E, B+D+F

C+D+E, C+D+F, D+E+F

3.1

A+B+C+D, A+B+C+E

A+B+C+F, A+C+D+E

A+C+D+F, A+D+E+F

B+C+D+E, B+C+D+F

C+D+E+F

2.4

A+B+C+D+E+F 1.7

PSS4

Speaker Sets On Impedance (Ω)

A, B, C or D 8

A+B, A+C, A+D

B+C, B+D, C+D

A+B+C, A+B+D

A+C+D, B+C+D

3.1

A+B+C+D 2.4

SPECIFICATIONS

AudioPowerHandling 50W(R.M.S.)/ch,

100W(Max)/ch

FrequencyResponse 20Hzto20KHz

ChannelSeparation 80dB

Crosstalkbetweenchannels 50dB

Speakerterminalwiresizerequirements14-22awg

Dimensions(WxHxD) 190x50x120mm(PSS4)

 250x50x150mm(PSS6)

Weight 0.81kgs(1.79lbs)(PSS4)

1.15kgs(2.54lbs)(PSS6)

PYLE Audio PSS6 User manual

Brand: PYLE Audio

Model: PSS6

Category: AV extenders

Type: User manual

This manual is also suitable for

PSS4

Download PDF

report

PYLE Audio PSS6 User manual

This manual is also suitable for

PYLE Audio PSS6 User manual

Related papers

Other documents