Lenco GRID-7 User manual



User manual Grid-7



www.lenco.com

Safety instructions

IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.



CAUTION

RISKOFELECTRICALSHOCK

DONOTOPEN

CAUTION:TOPREVENTANELECTRICALSHOCK,DONOTREMOVEANYCOVER

SCREWS.THEREARENOUSERSERVICEABLEPARTSINSIDE.REQUESTAQUALIFIED

SERVICEPERSONTOPERFORMSERVICING.



CAUTION：RISKOFEXPLOSIONIFBATTERYISREPLACEDBYANINCORRECTTYPE.

DISPOSE

OFUSEDBATTERIESACCORDINGTOTHEINSTRUCTIONS



Thissymbolindicatesthatthereareimportantoperatingmaintenanceinstructionsin

theusermanualaccompanyingthistablet.



Thissymbolindicatesthatdangerousvoltageispresentwithinthistablet,constituting

ariskofelectricshockorpersonalinjury.



Keep these instructions in mind:

 Do not use this device near water.

 Clean only with a slightly damp cloth.

 Do not cover or block any ventilation opening. When placing the device on a shelf, leave 5

cm (2”) free space around the whole device.

 Install in accordance with the supplied user manual.

 Don’t step on or pinch the power cord. Be very careful, particularly near the plugs and the

cable’s exit point. Do not place heavy items on the power cord, which may damage it. Keep

the entire device out of children’s reach! When playing with the power cable, they can

seriously injure themselves.

 Unplug this device during lightning storms or when unused for a long period.

 Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat-generating products.

 Avoid using the device near strong magnetic fields.

 ESD can disturb normal usage of this device. If so, simply reset and restart the device

following the instruction manual. During file transmission, please handle with care and

operate in a static-free environment.

 WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH THE VENTS

OR OPENINGS. HIGH VOLTAGE FLOWS THRU THE PRODUCT AND INSERTING AN

OBJECT CAN CAUSE ELECTRIC SHOCK AND/OR SHORT CIRCUIT INTERNAL

PARTS. FOR THE SAME REASON, DO NOT SPILL WATER OR LIQUID ON THE

PRODUCT.

 Do NOT use in wet or moist areas such as bathrooms, steamy kitchens or near swimming

pools.

 Do not use this device when condensation may occur.

This speaker is produced according to all current safety regulations. The following safety tips

should safeguard users against careless use and dangers involved with such use.

 Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all electrical

appliances. If you notice smoke, an excessive build-up of heat or any other unexpected

phenomena, you should disconnect the plug from the main power socket immediately.

 This device must be well ventilated at all time!

 This device must operate on a power source as specified on the specification label. If you

are not sure of the type of power supply used in your home, consult your dealer or local

power company.

 The socket outlet must be installed near the equipment and must be easily accessible.

 Do not overload AC outlets or extension cords. Overloading can cause fire or electric

shock.

 Devices with Class 1 construction should be connected to a main socket outlet with a

protective earthed connection.

 Devices with Class 2 construction do not require a earthed connection.

 Keep away from rodents. Rodents enjoy biting on power cords.

 Always hold the plug when pulling it out of the main supply socket. Do not pull the power

cord. This can cause a short circuit.

 Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

 To protect the device during a thunderstorm, unplug the AC power cable and disconnect

the aerial. Caution: Do not touch the aerial (RF) connector.

 When the device is not in use for long periods, unplug the AC power cable for safety

reasons.

 To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To

remove severe stains, you may use a damp cloth with dilute detergent.

 The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

 If the device will not be used for an extended period, please charge the battery at least

once per month to maintain battery life.

 For PLUGGABLE EQUIPMENT(external power adapter) the socket-outlet shall be

installed near the equipment and shall be easily accessible.

 The apparatus should supply via DC socket by a standard adaptor (input100-240V,

50/60Hz, output 5Vdc, 2.0A).

 The maximum ambient temperature is specified as 25°C.

 Charge the battery if:

a) The battery level icon displays (An empty battery)

b) The device switches off automatically when restarted.

 Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

WARNING: Prolonged exposure to loud sounds from personal music players may

lead to temporary or permanent hearing loss.

Description of parts

1. Buttons

1 Mode: short press to select between Bluetooth, Play (Micro-SD cardplaying) and

LINE- IN, there is sound notice for the operation step。Also short press this

button,you could reject the incoming call in the Bluetooth connecting.

2 Play/pause:

- In Bluetooth and card play mode, short press is play or pause. Have an incoming

call, short press to pick up the phone, another short press to end the call.

- In LINE-IN mode, short press is mute, short press again cancel mute.

In pause state (Bluetooth, card play or line-in mode), after 15minues, unit goes

standby and turns off to save power. Long press this button, unit will be turned on.

3 Previous/Vol-: short press is previous song, long press is VOL-

4 Next/Vol+: short press is next song, long press is Vol+. When MAX volume is

reached,“DI” sound will be noticed.(When unit abnormal return to standby under Line

in, volume level of the external connected device should be set to maximum level and

adjust the unit volume to a suitable level.)

5 Power on /off

2. Indication

1. 25% red light 25% power capacity

2. 50%red light 50% power capacity

3. 75%red light 75% power capacity

4. 100%Red light 100% power capacity.

If no light on the indicator means not enough power, please charge the unit.

5. Charge/Bluetooth indicator:

- Red light is in charging,light goes off means charging finished

- Blue light enter Bluetooth, flashing means match Bluetooth still not successful, blue

light always on means successful in Bluetooth pairing(Not connect with charging

source). Red and Blue light is on when unit connects with charging source

6. LINE-IN/ PLAY card, green light flash slowly is LINE-IN and card playing, green light

no flash means no card or pause

3. Socket

1. USB slot: 5V/500mA output

2. MIC hole: MIC sound input

3.DC socket: 5V/2A input

4.Micro USB slot: 5V/1.2A input

5.Micro SD card slot: For inserting

micro SD card

6.LINE-IN cable: Connect to external

audio device with LINE OUT

7.NFC location: NFC sensing area

4. Instruction

1. Micro-SD card play: Music format of MP3, WMA and WAV can be supported and

capacity of the card can be supported “up to 32G”.

2. Using PC to transfer file into the unit: Unit has to be in power off and card is inserted

into it, connecting PC to unit using Micro-USB slot, PC can detect unit as a drive and music

files can be transferred from PC to the unit. Deleting file from card can also be done.

3. Bluetooth function:Press “MODE” button to change as Bluetooth mode,turn on

smartphone with setting BLUETOOTH as ON, carry out Bluetooth scan until LENCO-GRID 7

is appeared, enter the PIN as (0000) to pair the unit until successful.(Bluetooth distance: 10

meters no obstacle.)

4. Bluetooth handsfree function(after smartphone is paired with the Bluetooth):When

there is an incoming call, please press to pick up phone call on the speaker, press

again when phone call is finished.

5. Line-in: attached 3.5m audio cable, connect with line out of PC,MP3/MP4,Smartphone

or other external audio device.

6. NFC(Near Field Communication): Place the smartphone close the NFC mark for easy

Bluetooth

connection. Before using NFC, smartphone is required to have NFC function and

set NFC and Android beam as ON.

7. Charging condition (Unit charging): When AC/DC adapter connects to DC in jack or

computer connects to Micro-USB slot by USB cable on the unit,”charge” indicator show red

as indicating the charging status. Four indicators are ON when charging is finished and

power is full. Charging time: 16 hours for empty battery

8. Charging condition (Smartphone charging): Connect USB port to Smartphone with

appropriate USB cable can unit can charge smartphone at on, off or standby mode.

9. Hand belt Installation

5. Technical data

Output power： 3WX2+5W

SNR： 57 dB

Frequency response： 100Hz~20KHz

Output impedance： high pitch 4Ω；bass 3Ω

distortion： ≤1%

speaker： high pitch 3W/4Ω，bass 5W/3Ω

Battery capacity： 8000mAh/3.7V

Charge power voltage/electric current： DC5V 2A(DC in jack); DC5V 1.2A (Micro-USB)

Bluetooth distance: 10 meters (no obstacles)

6. Troubleshooting

Symptom Possible Cause Solution

Unit abnormal return to

standby under Line in

1. Not in optimum

setting of volume in

external connected

device

1. Volume level of the

external connected device

should be set to maximum

level and adjust the unit

volume to a suitable level.

No sound at Bluetooth mode 1. Bluetooth device is

not paired with the

unit

2. Volume has set at

minimum

1. Follow the instructions to

pair the Bluetooth device

to the unit

2. Set the volume to high

level to resume audio

Sound distorted while playing

card

1. Original sound file is

distorted

1. Skip to other track to try

Bluetooth mode can’t change

to other mode

1. Not complete listen

the sound notice from

unit

1. Complete listeningthe

sound notice

Unit is performed abnormally 1. Something interrupt 1. Re-connect AC/DC

adapter to unit and set

power off to on andtry

again

Smartphone can’t connect

with the unit

1. Unit interrupted

2. Previous connect

smartphone is still

connected with the

unit

1. Re-connect DC in with

AC/DC adapter and set

power off and on.

2. The previous connected

smartphone has to set

BLUETOOTH as OFF.

Start searching of LENCO-

GRID 7 from another

smartphone with

BLUETOOTHof this phone

is set ON.

7. Service and support

For information: www.lenco.com

For support: http://lencosupport.zendesk.com

Lenco helpdesk:

Germany 0900-1520530 (Local charges)

The Netherlands 0900-23553626 (Local charges + 1ct p/min)

Belgium 02-6200115 (Local charges)

France 03-81484280 (Local charges)

The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.

When contacting Lenco, you will always be asked for the model and serial number of your

product. The serial number can be found on the back of the device. Please write down the

serial number below:

Model: Grid-7

Serial number:_________________________________

Lenco offers service and warranty in accordance to European law, which means that in case

of repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any

way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

7. Notice, statements and information

This symbol indicates that the relevant electrical product or battery should not

be disposed of as general household waste in Europe. To ensure the correct

waste treatment of the product and battery, please dispose them in

accordance to any applicable local laws of requirement for disposal of

electrical equipment or batteries. In so doing, you will help to conserve natural

resources and improve standards of environmental protection in treatment and

disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Products with the CE marking comply with the EMC Directive (2004/108/EC)

and the Low Voltage Directive (2006/95/EC) issued by the Commission of the

European Community.

Hereby, STL Group BV, Ankerkade 20 NL 5928 PL Venlo, declares that this product is in

compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC.

This product operates at 2400 - 2483.5 MHz and is designated only to be used inside a

normal household environment. This product is suited for this purpose within all EU counties.

Lenco GRID-7 User manual

Related papers

Other documents