Omega LVCN-71/-72/-73 Owner's manual

Type
Owner's manual

Omega LVCN-71/-72/-73 are Continuous RF Capacitance Transmitters or Controllers with Strobe Alert. They are used to measure the level of liquid in a tank using a 1 MHz pulse-wave radio frequency signal. The change in capacitance is converted into a 4 to 20 mA output, which can be used to indicate the level of the liquid. The sensor is made of FEP (Fluorinated Ethylene Propylene) and is compatible with a wide range of liquids. It has a maximum temperature rating of 70°C and a maximum pressure rating of 150 psi @ 25°C. The sensor is available in different lengths, up to 120 inches.

Omega LVCN-71/-72/-73 are Continuous RF Capacitance Transmitters or Controllers with Strobe Alert. They are used to measure the level of liquid in a tank using a 1 MHz pulse-wave radio frequency signal. The change in capacitance is converted into a 4 to 20 mA output, which can be used to indicate the level of the liquid. The sensor is made of FEP (Fluorinated Ethylene Propylene) and is compatible with a wide range of liquids. It has a maximum temperature rating of 70°C and a maximum pressure rating of 150 psi @ 25°C. The sensor is available in different lengths, up to 120 inches.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Omega LVCN-71/-72/-73 Owner's manual

Type
Owner's manual

Omega LVCN-71/-72/-73 are Continuous RF Capacitance Transmitters or Controllers with Strobe Alert. They are used to measure the level of liquid in a tank using a 1 MHz pulse-wave radio frequency signal. The change in capacitance is converted into a 4 to 20 mA output, which can be used to indicate the level of the liquid. The sensor is made of FEP (Fluorinated Ethylene Propylene) and is compatible with a wide range of liquids. It has a maximum temperature rating of 70°C and a maximum pressure rating of 150 psi @ 25°C. The sensor is available in different lengths, up to 120 inches.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI