Dodge Chain Pin Extractors Owner's manual

Dodge
Brand
Dodge
Model
Chain Pin Extractors
Type
Owner's manual

Dodge Chain Pin Extractors: These tools are designed to make removing and installing chain pins easier and safer. They are made of durable materials and are built to last. With proper use, they can help you to keep your chains in good working condition. The extractors are easy to use. Simply place the jaws of the tool over the roller with the push-out pin centered on the chain pin. Then, tighten down by turning the top handle clockwise until the chain pin loosens. The extractors are versatile and can be used on a variety of chains. They are also adjustable, so you can use them on different sizes of chain.

Dodge Chain Pin Extractors: These tools are designed to make removing and installing chain pins easier and safer. They are made of durable materials and are built to last. With proper use, they can help you to keep your chains in good working condition. The extractors are easy to use. Simply place the jaws of the tool over the roller with the push-out pin centered on the chain pin. Then, tighten down by turning the top handle clockwise until the chain pin loosens. The extractors are versatile and can be used on a variety of chains. They are also adjustable, so you can use them on different sizes of chain.

1
WARNING: When connecting or disconnecting chain:
• Always lock out equipment power switch before
removing or installing chains.
• Always USE SAFETY GLASSES to protect your eyes.
• Wear protective clothing, gloves and safety shoes.
• Support the chain to prevent uncontrolled movement
of chain and parts.
• Use of pressing equipment is recommended. Tools
should be in good condition and properly used.
Do not attempt to connect or disconnect chain unless
you know the chain construction, including the correct
direction for pin/rivet removal or insertion.
DISASSEMBLY SEQUENCE:
1. To prevent possible damage to roller link, and to make
disassembly easier, grind head of pins down, close to
ush with chain side plate.
2. Place jaws of tool over roller with push-out pin centered
on chain pin.
3. Tighten down by turning top handle clockwise until
chain pin loosens, driving it partially through the link
plate.
CAUTION: Do not force pin all the way through link
plate as pin plate will bend and damage roller link.
4. Follow same procedure on other pin of the same pin
link.
5. Return to original pin and force completely through pin
plate. Do the same on second pin freeing link plate from
the pins.
6. Remove disassembled pin link from the chain.
WARNING: Because of the possible danger to person(s) or property from
accidents which may result from the improper use of products, it is
important that correct procedures be followed. Products must be used
in accordance with the engineering information specified in the catalog.
Proper installation, maintenance and operation procedures must be
observed. The instructions in the instruction manuals must be followed.
Inspections should be made as necessary to assure safe operation
under prevailing conditions. Proper guards and other suitable safety
devices or procedures, as may be desirable, or as may be specified in
safety codes should be provided, and are neither provided by Baldor
Electric Company, nor are the responsibility of Baldor Electric Company.
This unit and its associated equipment must be installed, adjusted and
maintained by qualified personnel who are familiar with the construction
and operation of all equipment in the system and the potential hazards
involved. When risks to persons or property may be involved, a holding
device must be an integral part of the driven equipment beyond the
speed reducer output shaft.
Chain Pin Extractors
These instructions must be read thoroughly before operation.
Figure 1
TIP REPLACEMENT:
Tips are made of tool steel and can be easily replaced.
To remove damaged tip, use pliers and/or heat to
approximately 300ºF with a match or candle. While
holding tip end downward, it usually can be removed by
shaking out or by striking screw against a solid object
while hot. Insert new tip. NOTE: Do not push knurled end
into hole.
World Headquarters
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
Dodge Product Support
6040 Ponders Court, Greenville, SC 29615-4617 U.S.A., Ph: (1) 864.297.4800, Fax: (1) 864.281.2433
www.baldor.com
© Baldor Electric Company
MN4052 (Replaces 499780)
All Rights Reserved. Printed in USA.
3/10 PRINTSHOP 100
*4052-0310*
  • Page 1 1
  • Page 2 2

Dodge Chain Pin Extractors Owner's manual

Dodge
Brand
Dodge
Model
Chain Pin Extractors
Type
Owner's manual

Dodge Chain Pin Extractors: These tools are designed to make removing and installing chain pins easier and safer. They are made of durable materials and are built to last. With proper use, they can help you to keep your chains in good working condition. The extractors are easy to use. Simply place the jaws of the tool over the roller with the push-out pin centered on the chain pin. Then, tighten down by turning the top handle clockwise until the chain pin loosens. The extractors are versatile and can be used on a variety of chains. They are also adjustable, so you can use them on different sizes of chain.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents