2. FoodSaver
  3. FA2000 Handheld Sealer

FoodSaver FA2000 Handheld Sealer, FA2000-000 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the FoodSaver FA2000 Handheld Sealer Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Owner’s
Manual
FA2000 Handheld Sealer
For use with FM2000/FM2100 Models
FA2000-000
www.FoodSaver.com
Your new Handheld Sealer can
be used with all FM2000/FM2100
FoodSaver
®
Vacuum Sealer models
Works with FoodSaver
®
Vacuum Zipper Bags, Containers,
Canisters, and ALL other FoodSaver
®
accessories such as
Wine Stoppers, Jar Sealers and Marinator without requiring
additional adaptors, governors, etc.
Handheld Sealer with Clip
Hose
Chamber
Clip
Hose Clip
Attaching the
Handheld Sealer
1. Remove the plastic plug on the left side of the
appliance by pressing down and prying up with
a butter knife or similar dull object.
2. Push the Chamber Clip into the hole until
it clicks into place.
2
figure 1
figure 2
Vacuum Seal with FoodSaver
®
Accessories
1. Place food into Zipper
Bag. Make sure not to
put any food under valve.
Press zipper closed with
finger while bag is lying
down on a flat surface.
2. Pull Handheld Sealer
from appliance. Place
end over the white valve
on bag.
3. Push Vac/Seal
button to
begin vacuum
process.
Motor will run until vacuum
process is complete.
How to...
How to...
Customer Service: 1 (877) 777-8042
Use Handheld Sealer with Vacuum Zipper Bags
Containers
1. Prepare container according to FoodSaver
®
Accessory
Guidelines, which are included with accessory purchases.
2. Pull Handheld Sealer from appliance.
Place end over gray valve on container.
3. Push Vac/Seal Button to begin vacuum process.
Motor will run until vacuum process is complete.
3
©2014 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.
Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Printed in China SPR-061714-372P PN 177480
Care & Cleaning
Empty Reservoir after each use.
Wash in warm soapy water.
Air dry before replacing.
To Remove Reservoir from handheld sealer,
holding top portion (black upper piece)
firmly, pull lower reservoir down and off.
Canisters
1. Prepare canister according to FoodSaver
®
Accessory
Guidelines, which are included with accessory purchases.
2. Pull Handheld Sealer from appliance and remove clear bottom
portion of handheld from top handle (Fig. 1). Insert the end
into the port on accessory. Twist tab while inserting to ensure
a tight fit.
3. Push Vac/Seal Button to begin vacuum process.
Motor will run until vacuum process is complete.
4. When motor turns off, gently twist and remove Handheld
Sealer from accessory.
NOTE: If you are using a canister with a large white knob, rotate
knob clockwise to the “Closed” position, then gently twist
and remove Handheld Sealer from accessory.
5. To test vacuum, simply tug on accessory lid.
It should not move.
Fig. 1
Vacuum Seal with FoodSaver
®
Accessories
How to...
/