Eagle Group 4337 Datasheet

Eagle Group
Brand
Eagle Group
Model
4337
Type
Datasheet

This manual is also suitable for

Eagle Group 4337 is a universal roll-in rack designed to accommodate a variety of sheet pan sizes, including 12" x 20", 18" x 26", 13" x 18", and 14" x 18". It is constructed of heavy-duty 6063-T5 aluminum alloy and features a fully welded frame with 1" square tubular crossbracing. The base consists of 11/2" x 11/2" square aluminum tubing with pre-tapped caster plates welded inside. The rack is equipped with 31/4" wide angle slides welded to the uprights and heavy-duty 5" x 13/8" non-marking swivel casters. It has a lifetime guarantee against rust, corrosion, material defects, and workmanship.

Eagle Group 4337 is a universal roll-in rack designed to accommodate a variety of sheet pan sizes, including 12" x 20", 18" x 26", 13" x 18", and 14" x 18". It is constructed of heavy-duty 6063-T5 aluminum alloy and features a fully welded frame with 1" square tubular crossbracing. The base consists of 11/2" x 11/2" square aluminum tubing with pre-tapped caster plates welded inside. The rack is equipped with 31/4" wide angle slides welded to the uprights and heavy-duty 5" x 13/8" non-marking swivel casters. It has a lifetime guarantee against rust, corrosion, material defects, and workmanship.

Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG60.33 Rev. 12/08
Catalog Specification Sheet No.
EG60.33
LIFETIME Series Universal Roll-In Racks
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Options / Accessories
Corner bumpers
Caster locks
Solid base*
Perimeter bumpers*
Pan stop*
Vertical bumpers
* Factory-installation required.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
LIFETIME Series
Universal Roll-In Racks
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: [email protected]
MODELS:
4337
4338
Short Form Specifications
Eagle LIFETIME Series Universal Roll-In Rack, model
____________. Constructed of heavy duty 6063-T5 aluminum
alloy. Fully welded frame. 1˝ square tubular crossbracing. Base
consists of 1
1
⁄2˝ x 1
1
⁄2˝ square aluminum tubing with pretapped
caster plates welded inside. 3
1
⁄4˝ wide angle slides welded to
uprights. Heavy duty 5˝ x 1
3
⁄8˝ non-marking swivel casters.
Design and Construction Features
• LIFETIME GUARANTEE against:
- rust and corrosion
- material defects and workmanship
• Built especially for roll-in freezers, proofers,
and refrigerators.
• All heavy duty type 6063-T5 alloy aluminum
welded construction.
• Unit base consists of 1
1
⁄4˝ x 1
1
⁄2˝ (32 x 38mm) square
aluminum tubing with pretapped caster plates
welded inside.
• Fully-welded frame features 1
1
⁄2˝ x 1
3
⁄4˝ (38 x 45mm)
heavy-duty “D”-shaped tube construction.
• Crossbracing consists of 1˝ (25mm) square tubing.
• Heavy duty 5˝ x 1
3
⁄8˝ (127 x 35mm) non-marking swivel
plate casters.
• 3
1
⁄4˝ (83mm)-wide aluminum angle slides are welded
to uprights.
• These racks accommodate a variety of sheet pan sizes.
• Three welds per angle connection.
LIFETIME Series
universal roll-in rack
Certifications / Approvals
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
EG60.33
LIFETIME Series Universal Roll-In Racks
Item No.:
Project No.:
S.I.S. No.:
Rev. 12/08
Printed in U.S.A.
©2008 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
LIFETIME Series Universal Roll-In Racks
FRONT VIEW
SIDE VIEW
TOP VIEW
overall dimensions sliding pan/tray capacity
width depth height weight space 12˝ x 20˝ 18˝ x 26˝ 13˝ x 18˝ 14˝ x 18˝
model # in. mm in. mm in. mm lbs. kg in. mm pan pan pan tray
4337 21
1
⁄2˝ 546 26˝ 660 64˝ 1626 68 30.8 5˝ 127 10 11 22 22
4338 21
1
⁄2˝ 546 26˝ 660 64˝ 1626 81 36.7 3˝ 76 17 18 36 36
  • Page 1 1
  • Page 2 2

Eagle Group 4337 Datasheet

Eagle Group
Brand
Eagle Group
Model
4337
Type
Datasheet
This manual is also suitable for

Eagle Group 4337 is a universal roll-in rack designed to accommodate a variety of sheet pan sizes, including 12" x 20", 18" x 26", 13" x 18", and 14" x 18". It is constructed of heavy-duty 6063-T5 aluminum alloy and features a fully welded frame with 1" square tubular crossbracing. The base consists of 11/2" x 11/2" square aluminum tubing with pre-tapped caster plates welded inside. The rack is equipped with 31/4" wide angle slides welded to the uprights and heavy-duty 5" x 13/8" non-marking swivel casters. It has a lifetime guarantee against rust, corrosion, material defects, and workmanship.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents