2. T & S Brass & Bronze Works
  3. B-2851-135X-VR

T & S Brass & Bronze Works B-2851-135X-VR Datasheet

  • Hello! I am an AI chatbot trained to assist you with the T & S Brass & Bronze Works B-2851-135X-VR Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the model number of the faucet?
    What is the maximum sink thickness that the faucet can be mounted on?
    What flow rate does the faucet have?
    What type of flow device does the faucet have?
    What is the minimum rough-in required for the center shank?
    What is the minimum rough-in required for the hot/cold side?
    What type of handles does the faucet have?
    What type of cartridges does the faucet have?
    What is the distance between the inlet centers?
    What is the included optional swivel/rigid washer used for?
6 5/16"
[160mm]
8 3/4"
[222mm]
[32mm]
Fits Sinks
Up To
1-1/4" Thick
(Optional Swivel/Rigid
Washer Included)
135X Swivel Gooseneck
B-0199-21-VRF
2.2 GPM VR
Laminar Device
2
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
REG. #A2601
ISO #9001
07/16/10
DMH
B-2851-135X-VR
of
1
135X Gooseneck w/ 2.2 GPM VR Laminar Flow Device
2 Saddleback Cove / P.O. Box 1088
Date:
Travelers Rest, SC: 800-476-4103
Simi Valley, CA: 800-423-0150
Fax: 864-834-3518
www.tsbrass.com
JHB
JRM
Approved
Drawn
NTS
Compression Cartridges, 8" Inlet Centers,
EasyInstall Faucet, Lever Handles w/ VR Screws,
Sheet:
Checked
This Space for Architect/Engineer Approval
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
Mounting
Flange
Surface
Deck
1" [25mm] for Center Shank
Note: Rough-In Required:
1-1/2" [38mm] for Hot/Cold Side [ 1-1/4" [32mm] Minimum]
& VR Screws
Color Coded Indexes
Lever Handles w/
Escutcheons
[57mm]
2-1/4"
1-11/16"
[43mm]
Swivel
1/2" NPSM
Coupling Nuts
8"
[203mm]
12 9/16"
[318mm]
017245-40
Installation Repair Kit
Includes #8, (2)#11, & #13
of
2
Sheet:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
Travelers Rest, SC: 800-476-4103
Fax: 864-834-3518
REG. #A2601
ISO #9001
B-2851-135X-VR
Simi Valley, CA: 800-423-0150
2 Saddleback Cove / P.O. Box 1088
Approved
Drawn
Checked
2
www.tsbrass.com
NTS
Date:
135X Gooseneck w/ 2.2 GPM VR Laminar Flow Device
DMH
07/16/10
Scale:
Product Specifications:
JRM
JHB
EasyInstall Faucet, Lever Handles w/ VR Screws,
Compression Cartridges, 8" Inlet Centers,
18
10
8
2
13
1
4
5
6
11
7
15
16
Place Washer into Swivel
Body. Reinstall
Gooseneck.
9
3
12 14
17
Washer Converts Swivel
Gooseneck to Rigid. To
Install: Uninstall
Gooseneck, Lift Out, &
19
ITEM
NO.
SALES NO. DESCRIPTION
1 001661-45 Red Index-HW
2 B-0199-21-VRF VR Laminar Flow Device
3 135X-LAM-VR 135X w/ B-0199-21-VRF
4 001660-45 Blue Index-CW
5 010586-45 Pin-In-Socket Screw
6 001638-45 Lever Handle
7 001257-40 Bell Escutcheon
8 016742-45 Center Flange Nut
9 016745-45 Compression Nut & Fitting
10 016752-40
EasyInstall CWS LTC
Eterna (Teflon)
11 016749-45 C-Washer
12 015425-45 Vandal Resistant Key
13 016777-45 CWS Hanger
14 010587-45 Pin-in-Socket Hex Key
15 000958-20 Coupling Nut
16 016753-40
EasyInstall CWS RTC
Eterna (Teflon)
17 016743-25 CWS Bonnet Assembly
18 009002-25 Packing Nut Assembly
19 014200-45 Star Washer, Anti-Rotation
/