2. Lowrance
  3. HDS-8 Gen2

Lowrance HDS-8 Gen2, HDS-8 Template

  • Hello! I am an AI chatbot trained to assist you with the Lowrance HDS-8 Gen2 Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
6.929
[176.00]
6.996
[177.70]
8.622
[219.00]
9.791
[248.70]
HOLE SAW 4 PLS.
Ø2.87 [Ø73.00]
Ø.12 [#31 DRILL]
FOR SELF TAPPING HOLE
(MATERIAL DEPENDENT)
4 PLS.
TOP
Surface area needed to mount unit without cover
Cut on this line
988-0176-15A
THIS TEMPLATE CAN ONLY
BE USED WITH THE HDS-8
AND HDS-8M.
This template must be printed on
11x17, A3 or larger size paper
Printing instructions:
1. After selecting File | Print, the printer
settings page will appear.
2. Set Page Scaling to “None.”
3. Select “Choose Paper Source by PDF page
size.”
4. Print the document.
VERIFY TEMPLATE DIMENSIONS BEFORE CUTTING ANY HOLES IN YOUR VESSEL
/