Roland R-26 Owner's manual

Type
Owner's manual

Roland R-26 is a versatile audio mixer that offers a wide range of features for musicians, producers, and sound engineers. With its intuitive controls and comprehensive connectivity, the R-26 is ideal for a variety of applications, including live sound reinforcement, studio recording, and podcasting.

Some of the key features of the Roland R-26 include:

  • Six channels of high-quality analog inputs with XLR and TRS connectors
  • Three-band EQ and pan controls on each channel
  • Two aux sends and two stereo returns for external effects and monitoring
  • Built-in limiter and low-cut filter on each channel

Roland R-26 is a versatile audio mixer that offers a wide range of features for musicians, producers, and sound engineers. With its intuitive controls and comprehensive connectivity, the R-26 is ideal for a variety of applications, including live sound reinforcement, studio recording, and podcasting.

Some of the key features of the Roland R-26 include:

  • Six channels of high-quality analog inputs with XLR and TRS connectors
  • Three-band EQ and pan controls on each channel
  • Two aux sends and two stereo returns for external effects and monitoring
  • Built-in limiter and low-cut filter on each channel
Notice
A new function has been added to the R-26.
In conjunction with this, the following section in the owner’s manual should be updated as shown below to reect this change.
Page 96 (or 93) “Settings for the R-26”
INPUT SETUP – ANALOG IN
Category Menu item / Eect Value (default value: bold)
INPUT SETUP
ANALOG
IN (p. 38)
*1
*2
INPUT TYPE
Species the external input type.
SEPARATE, LINK, MS-MIC
INPUT1 PHANTOM
Species whether phantom power
will be supplied to the ANALOG IN
1/L jack.
OFF, ON
INPUT1 LIMITER
Turns the limiter on/o.
OFF, ON
INPUT1 LCF SW
Turns the low-cut lter on/o.
OFF, ON
INPUT2 PHANTOM
Species whether phantom power
will be supplied to the ANALOG IN
2/R jack.
OFF, ON
INPUT2 LIMITER
Turns the limiter on/o.
OFF, ON
INPUT2 LCF SW
Turns the low-cut lter on/o.
OFF, ON
LCF CUTOFF
Species the frequency of the
low-cut lter.
100 Hz, 200 Hz, 400 Hz
MS-MIC WIDTH
Adjusts the width of the sound.
0–5–10
MONITOR TYPE
Selects the type of sound when
monitoring the input from the
ANALOG IN 1/L jack, 2/R jack.
STEREO, MONO
Added
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
R-26
お知
R-26 に機能が追加されました。これに伴い、取扱説明書の記載内容を以下のように変更致します。
P.96 P.93)「R-26 本体の各種設定」
入力設定ーアログ
カテゴリー メニュー/効果 値(初期値:太字)
入力設定
アナログイン
(P.38)
1
2
外部入力タイプ
外部入力タイプを設定します。
セパレート、リンク、MS マイク
入力 1 ファンタムパワー
ANALOG IN 1/L 端子にファン
タム電源を供給するかどうか設定
します。
オフ、オン
入力 1 リミッター
リミッターを設定します。
オフ、オン
入力 1 LCF スイッチ
ローカット・フィルターのオン/
オフを設定します。
オフ、オン
入力 2 ファンタムパワー
ANALOG IN 2/R 端子にファン
タム電源を供給するかどうか設定
します。
オフ、オン
入力 2 リミッター
リミッターを設定します。
オフ、オン
入力 2 LCF スイッチ
ローカット・フィルターのオン/
オフを設定します。
オフ、オン
LCF カットオフ
ローカット・フィルターでカット
する周波数を設定します。
100 Hz、200 Hz、400 Hz、
MS-MIC 設定
音の広がりを調節します。
0 5 10
モニター・タイプ
ANALOG IN 1/L 端子、2/R
子からの入力をモニターするとき
の音のタイプを選びます。
ステレオ、モノ
追加
©2012ローランド株式会社 本書の一部、もしくは全部を無断で複写・転載することを禁じます。
R-26
  • Page 1 1
  • Page 2 2

Roland R-26 Owner's manual

Type
Owner's manual

Roland R-26 is a versatile audio mixer that offers a wide range of features for musicians, producers, and sound engineers. With its intuitive controls and comprehensive connectivity, the R-26 is ideal for a variety of applications, including live sound reinforcement, studio recording, and podcasting.

Some of the key features of the Roland R-26 include:

  • Six channels of high-quality analog inputs with XLR and TRS connectors
  • Three-band EQ and pan controls on each channel
  • Two aux sends and two stereo returns for external effects and monitoring
  • Built-in limiter and low-cut filter on each channel

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages