Petsafe 62338 Use Guide

Brand: Petsafe

Model: 62338

Type: Use Guide

PetSafe 62338 is a wireless pet containment system that allows you to keep your pet safely contained within a designated area. The system includes a transmitter that plugs into an electrical outlet and a receiver collar that your pet wears. The transmitter emits a radio signal that creates a circular boundary around your home. When your pet approaches the boundary, the receiver collar will emit a warning tone. If your pet continues to approach the boundary, the receiver collar will deliver a static correction. You can adjust the width of the boundary from 5 to 90 feet.

130412

SOLVIT Products, LP  1114 W Harris Rd, Suite 101  Arlington, TX 76001

Tel: 866-6-SOLVIT (866-676-5848)  Fax: (817) 466-2291

Email: customerservi[email protected]  www.solvitproducts.com

Front Seat Net Pet Barrier

™

Care & Use Guide

Thank you for purchasing the Solvit Products Front Seat Net Pet Barrier™. This barrier is designed for installation

behind the front seat in all vehicles with headrests.

WARNING: The mesh barrier is attached to a coiled metal frame which might “pop open” when removed from the

pouch - remove carefully in an open area. The pouch should contain the mesh barrier, support rod and 2 cinch straps.

Installation: To ease installation, consider raising each front seat head rest to clearly expose the metal headrest posts

(they can be returned to their normal position after installation). Allow the mesh barrier to “pop open” to its natural,

square shape. Assemble the support rod with the coupler between the two straight sections. Insert one end of the

support rod into the small “pocket” at the bottom edge of the barrier. While bending the support rod slightly, insert

the other end into the pocket at the top edge of the barrier.

Attach the swivel hooks from each cinch strap onto one of the fabric loops

sewn into the sides of the barrier. There are two loops on each side – most

vehicles will fit best using the lower loops. With the support rod on the

“front seat” side of the barrier, thread the cinch straps around the outer

headrest posts and loop back through the cinch rings. Tighten each cinch

strap so the barrier is centered between the two seats. If the barrier rides

too high, consider changing the swivel hooks to the upper fabric loops.

but

Install the Sta-Put™ tube in the front passenger seat by pushing the plastic

tube into the space between the seat back and seat bottom. Tighten the Sta-

Put™ strap so the bottom edge of the barrier rests firmly against the back

of the seats and/or console (it might be necessary to hold the Sta-Put™ tube

in place when adjusting the strap). Tuck any extra strap material between

the seat cushions. The Sta-Put™ tube can be removed with a strong tug,

should stay in place under normal conditions.

To “fold down” the barrier for storage,

remove the support rod, then while holding

the left and right sides, twist hands in opposite directions while bringing hands

together. The wire frame should form three concentric circles. Align the circles then

place barrier in the storage pouch. Handle carefully as the barrier can “pop open” if n

held in this stowed position.

Cleaning & Safety

: Wipe with damp cloth or sponge and mild cleaner. No machine

wash. Never leave pets in vehicle unattended.

Warranty: The Front Seat Net Pet Barrier is warranted to be free from

defects in materials or workmanship for a period of one (1) year from the

date of purchase. A copy of the original sales receipt is required for warranty issues.

Solvit Products is dedicated to offering innovative solutions to improve pets’ quality of life. Please feel free to

Petsafe 62338 Use Guide

Petsafe 62338 Use Guide

Related papers

Other documents