Gaggenau DF250762 Owner's manual

*DJJHQDX

en-us Operating instructions

fr-ca Notice d'utilisation

Dishwasher

DF250/DF251

2

3

en-us

Table of contents

en-us Operating instructions

(

Safety Definitions 6

(

IMPORTANT SAFETY INSTRUCTIONS 7

Risk of fire, electrical shock, or serious injury 7

GROUNDING INSTRUCTIONS 8

Safe Operation 8

Proper Care and Maintenance 9

ƒ

Causes of Damage 10

*

Getting Started 11

Appliance overview 11

Operating panel 12

Dishwasher interior components 12

Display indicators 12

Info button 12

Time setting 12

Switching on the appliance for the first time 13

Settings 13

Home Connect™ System 15

Setting up the app 15

Setting up Home Connect 15

WLAN | 15

Network login 15

Connect to App 15

Remote start button 16

Wi-Fi without a connection to the

Home Connect server 16

Remote diagnosis 16

+

Water softening system / special salt 16

Water hardness table 16

Adjusting the water softening system 17

Using special salt 17

Detergent with a salt component 18

Switching off water softening system 18

,

R i n s e A i d 1 8

Adding rinse aid 18

Setting the amount of rinse aid used 19

Switching off rinse aid refill indicator 19

Loading the Dishwasher 20

Dishware material 20

Glass and silverware damage 20

Loading the racks 21

Loading patterns 21

Unloading the dishwasher 23

Adjusting the height of the rack 23

RackMatic

®

System 23

Removing/Installing third rack 24

Removing/Installing upper rack with Rackmatic

®

25

Rack features 26

.

Detergent 28

Adding detergent 28

Combination detergent 29

/

Dishwasher Cycles 30

0

Dishwasher Cycle Options 31

Intensive Zone 31

Turbo ¥ 31

Extra Dry 31

Wash Cycle Information 31

1

Operating the Dishwasher 32

Protection against unintentional operation 32

Operating the touch buttons 32

Changing the settings 32

AquaSensor 33

Time display 33

Sensor setting 33

Extra Dry 33

Eco forecast 33

Auto power off 33

Tone volume 33

Button volume 33

Greeting 34

Factory setting 34

Switching the appliance on 34

Delay start time 34

InfoLight

® *

34

EmotionLight 35

Wash cycle end 35

Switching off the appliance 35

Interrupting the wash cycle 35

Cancel a cycle (reset) 35

Changing the wash cycle 35

4

en-us

2

Care and Maintenance 36

Cleaning the dishwasher 36

Special salt and rinse aid 36

Filters 36

Spray arms 38

Drain pump 38

Preparing your unit for vacation 39

Winterizing your unit 39

3

Troubleshooting 40

Error message 40

Fault table 40

4

Customer Service 47

‡

Statement of Limited Product Warranty 47

What this Warranty Covers & Who it Applies to: 47

How Long the Warranty Lasts 47

Repair/Replace as Your Exclusive Remedy 48

Out of Warranty Product 48

Warranty Exclusions 48

How to Obtain Warranty Service 49

5

Installation and connection 49

Parts included 49

Safety instructions 49

Delivery 50

Technical specifications 50

Installation 50

Drain connection 50

Water supply connection 51

Hot water connection 51

Electrical connection 52

Removing the appliance 52

Transporting the appliance 52

Securing the appliance against frost 52

5

en-us

&RQJUDWXODWLRQVDQG7KDQN<RXIURP*DJJHQDX





3KRQH

0DLQ6WUHHW6XLWH

,UYLQH&$

7KDQN\RXIRUVHOHFWLQJD*DJJHQDXGLVKZDVKHU<RXKDYHMRLQHGWKHPDQ\FRQVXPHUV

7KLVPDQXDOZDVZULWWHQZLWK\RXUVDIHW\DQGFRQYHQLHQFHLQPLQGDQGWKHLQIRUPDWLRQFRQWDLQHGKHUHLQLVYHU\LPSRUWDQW

7ROHDUQHYHQPRUHDERXW\RXUGLVKZDVKHUDQGDYDLODEOHDFFHVVRULHVDVZHOODVPDQ\RWKHUWRSTXDOLW\

3OHDVHFRQWDFWXVLI\RXKDYHDQ\TXHVWLRQVRUFRPPHQWV

ZKRGHPDQGTXLHWDQGVXSHULRUSHUIRUPDQFHIURPWKHLUGLVKZDVKHUV

:HKLJKO\UHFRPPHQGWKDW\RXUHDGWKLVPDQXDOEHIRUH\RXXVH\RXUGLVKZDVKHUIRUWKHILUVWWLPH

*DJJHQDXDSSOLDQFHVYLVLWRXUZHEVLWHDWZZZJDJJHQDXXVDFRP

*DJJHQDX

86$

LQIR#JDJJHQDXXVDFRP

ZZZJDJJHQDXXVDFRP

6

en-us Safety Definitions

(

Safety Definitions

 WARNING

This indicates that death or serious injuries may

occur as a result of non-observance of this

warning.

 CAUTION!

This indicates that minor or moderate injuries may

occur as a result of non-observance of this

warning.

NOTICE: This indicates that damage to the appliance

or property may occur as a result of non-compliance

with this advisory.

Note: This alerts you to important information and/or

tips.

7

 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

(

IMPORTANT SAFETY INSTRUCTIONS

This dishwasher is provided with Installation

Instructions and this Use and Care Manual.

Read and understand all instructions before

using the dishwasher.

This dishwasher is intended for use up to a

maximum altitude of 13,000 ft (4,000 meters)

above sea level.

To reduce the risk of fire, electrical shock,

or serious injury, observe the following:

Risk of fi re, el ect r i cal shock, or ser i ous injury

 WARNING

Risk of injury or death!

Misuse of the dishwasher can result in

serious injury or death. Do not use the

dishwasher in any way not covered in this

manual or for any purpose other than

those explained in the following pages.

 WARNING

Risk of injury!

Severe injury and/or product damage

could result from the use of unauthorized

service technicians or non-original

replacement parts. All repairs must be

performed by an authorized service

technician using only original equipment

factory replacement parts.

 WARNING

Risk of electrical shock or fire!

Electrical shock or fire could result if the

electrical supply for the dishwasher

covered in this manual is incorrectly

installed or if the dishwasher has been

improperly grounded. Do not use the

dishwasher covered in this manual unless

you are certain the electrical supply has

been correctly installed and the

dishwasher has been properly grounded.

 WARNING

Health hazard!

Never use harsh chemicals to clean your

dishwasher. Some bleach-based products

can damage your dishwasher and may

present health hazards!

 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

8

GROUNDING INSTRUCTIONS

This appliance must be grounded to a metal,

permanent wiring system or an equipment

grounding conductor must be run with the

circuit conductors and connected to the

equipment grounding terminal or lead on the

dishwasher. See the Installation Instructions

included with this dishwasher for more

information on electrical requirements.

 WARNING

Risk of electric shock!

This appliance must be grounded. In the

event of a malfunction or breakdown,

grounding will reduce the risk of electric

shock by providing a path of least

resistance for electric current. This

appliance is equipped with a cord having

an equipment-grounding conductor.

Improper connection of the equipment-

grounding conductor can result in risk of

electric shock. Check with a qualified

electrician if you are in doubt whether the

appliance is properly grounded.

Safe Operation

Use this dishwasher only for its intended

function, which is the washing of household

dishware and kitchenware rated as dishwasher

safe.

Use only detergents or rinsing agents

recommended for use in a dishwasher, and

keep them out of the reach of children.

 CAUTION!

When loading items to be washed:

ʋ Locate sharp items so they are not

likely to damage the door seal.

ʋ Load knives and other sharp utensils

with their HANDLES UP to reduce the

risk of cut-type injuries.

ʋ Do not wash plastic items unless they

are marked “dishwasher safe” or the

equivalent. For plastic items not so

marked, check the manufacturer’s

recommendations.

ʋ Do not operate your dishwasher unless

all enclosure panels are in place.

ʋ Do not tamper with or override

controls and interlocks.

Do not abuse, sit or stand on the door or dish

racks of the dishwasher.

9

 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

 WARNING

Risk of injury!

To avoid risk of injury, always use caution

when opening the door during or

following a wash cycle as hot water or

steam may escape. Do not fully open the

door until water noises have stopped and

steam has subsided.

To reduce risk of injury, do not allow

children to play in or on the dishwasher.

When children become old enough to

operate the appliance, it is the

responsibility of the parents/legal

guardians to ensure the children are

instructed in safe practices by qualified

persons.

NSF/ANSI 184 Certified residential

dishwashers are not intended for licensed

food establishments.

Proper Care and Maintenance

 WARNING

Risk of explosion!

Under certain conditions, hydrogen gas

may be produced in a hot water system

that has not been used for two weeks or

more. Hydrogen gas is explosive. Before

using a dishwasher that is connected to a

hot water system that has been unused

for two weeks or longer, turn on all hot

water faucets and let the water flow from

each for several minutes. This will release

any accumulated hydrogen gas. As the

gas is explosive, do not smoke or use an

open flame during this time.

Remove the dishwasher door to the washing

compartment when removing an old

dishwasher for service or discarding.

To avoid floor damage and possible mold

growth, do not allow wet areas to remain

around or under the dishwasher.

Note: To avoid dishwasher damage, do not

allow water to remain in your dishwasher

systems through extended periods of freezing

temperatures. Freezing temperatures can

damage the water fill valve and potentially

other components of your dishwasher.

NOTICE: It is highly recommended for the

end user to become familiar with the

procedure to shut off the incoming water

supply and the procedure to shut off the

incoming power supply. See the Installation

Instructions or contact your installer for more

information.

State of California Proposition 65 Warning:

 WARNING

This product can expose you to chemicals

including vinyl chloride, which is known

to the State of California to cause cancer

and birth defects or other reproductive

harm. For more information go to

www.P65Warnings.ca.gov.

10

en-us Causes of Damage

ƒ

Causes of Damage

NOTICE: ʑNever use steam cleaning products to clean

your dishwasher. The manufacturer will not be liable

for the possible damages or consequences.

ʑ To avoid possible dishwasher damage, do not use

harsh chemicals, abrasive cleaners, scouring pads

(metal or plastic), or abrasive cloths/paper towels to

clean your dishwashers exterior door panel. Your

dishwasher's exterior door panel can be damaged by

doing so.

ʑ To avoid dishwasher damage, do not load the

dishwasher with paper products, plastic bags,

packing materials or anything other than normal,

dishwasher safe dishware and kitchenware.

ʑ Protect your dishwasher from the elements. Protect

against freezing to avoid possible damage to the fill

valve. Damage caused by freezing is not covered by the

warranty.

11

Getting Started en-us

*

Getting Started

Getting Start ed

Appliance overview

The dotted lines show optional features which may or

may not be included with your dishwasher.

67$57

UHVHWVHF

VHF

K

PLQ









  



 







UHVHWVHFVHFW

































12

en-us Getting Started

The numbers stated below refer to the overview images

on the previous page of this manual.

Operating panel

** the wash cycles and options will vary by model

Dishwasher interior components

* optional feature which may or may not be included with

your dishwasher.

Display indicators

--------

Info button 

Info but t on

The Info button  can be used to display additional wash

cycle information.

1. Press the Info button 8.

2. Press the wash cycle button.

Information on the selected wash cycle is indicated

on the display window at the top @.

3. To leave, press Info button  8.

Time setting

Ti me set t i ng

When the appliance is switched on for the first time, the

time starts at 12:00 o’clock.

Set the time as follows:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button  8 for 3 seconds until the

following text is indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with W 3 sec.

4. Keep pressing button > ` until the time setting is

indicated on the display window at the top @.

5. Make the setting with setting buttons + - X. If the

selection buttons + - X are held down, the set

values are changed in 10-minute increments.

6. Press and hold the Info button 8 for 3 seconds.

The selected setting has now been stored.

Note: If the appliance was disconnected from the power

supply for a prolonged period, the time starts at 12:00

o’clock. Set the time.

( On/Off button

0 Wash cycles**

8 Info button 

@ Digital display

H Rinse aid refill indicator

P Salt refill indicator

X Selection buttons

` Delay start / < button

h Remote start / > buttton

)" Wash cycle options**

)* START button

1" Interior light *

1* Third rack

12 Upper rack

1: Upper spray arm

1B Detergent tab tray

1J Lower spray arm

1R Dispenser for special salt

1Z Filters

1b Silverware basket *

1j Lower rack

9" Rinse aid dispenser

9* Detergent dispenser

92 Lock for detergent dispenser

9: Rating plate

¯:¯¯ Cycle time remaining

% Lights up when rinse aid is low

$ Lights up when salt is low

| Lights up when wifi is connected

13

Getting Started en-us

Switching on the appliance for the first

time

When you first turn on the dishwasher, you are taken

directly to the settings for switching on the appliance for

the first time. The following text is indicated on the

display window at the top @:

Scroll with < >

Set with + -

Leave with W 3 sec.

The required settings for switching on the appliance for

the first time are listed in the table below.

Change the setting as follows:

1. Keep pressing button > ` until the required setting

is displayed.

2. Make the selection with setting buttons + - X.

3. Press and hold the Info button 8 for 3 seconds.

The selected setting has now been stored.

--------

Settings

The dishwasher has been preset with certain settings

for your convenience. You can change these factory

setting.

Change the setting as follows:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button  8 for 3 seconds until the

following text is indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with W 3 sec.

4. Keep pressing button > ` until the required setting

is displayed.

5. Make the selection with setting buttons + - X.

6. Press and hold the Info button 8 for 3 seconds.

The chosen setting has now been stored.

You have the option of resetting all changed settings

back to the original factory settings.

Note: When you reset your dishwasher to the factory

settings, you are taken directly to the settings for

switching on the appliance for the first time.

Settings

Switching on the

appliance for the first

time

Factory setting Infotext

by pressing Info button 

Language American English Language selection.

Time format 24h 12h or 24h.

Time setting 12:00 Set the current time.

Water soft setting °E 0 - 8 soft Setting water hardness. When using Multitabs, select the

lowest setting.

Rinse aid setting Level 5 Amount of rinse aid affects drying.

Setting Factory setting Infotext

by pressing Info button

Time setting 12:00 Set the current time.

Time format 24h 12h or 24h.

Time display Time Show end of wash cycle with display "Time" or "In hours".

Language American English Language selection.

Water hardness °E0-8 Soft Setting water hardness. When using Multitabs, select the

lowest setting.

Rinse aid disp. Level 5 Amount of rinse aid affects drying.

Sensor setting Standard Adjusting water clarity detection for best cleaning results.

Extra dry Off Improved drying for glasses and plasticware.

Eco forecast Off Show the water and energy consumption.

14

en-us Getting Started

Notes

ʑ The “Network login” menu option is only available if

WLAN has been switched on.

ʑ The “Connect to App” menu option is only available if

a connection to the home network has been

established.

--------

Auto Power Off Off Appliance automatically switches off at end of rinsing

process.

EmotionLight On Interior light.

Front display* On The front display can be selected.

Remaining time proj. * On While program is running, status information is projected

onto floor.

Infolight * On Light is projected to signal an active cleaning cycle.

Start Program Auto 130-150 °F When switching on, the last selected wash cycle appears.

Tone volume Level 2 Volume of signal at end of wash cycle.

Button volume Level 2 Volume when using buttons.

WLAN on/off Switch wireless network connection on or off.

Network login Manual or

Autom./ WPS

Check WPS function on router. WLAN must be turned on for

this setting to appear.

No WPS function: Manual

WPS function: Automatic

Connect to App Start with + Connect appliance to mobile terminal device. Appliance must

be connected to the network for this setting to appear.

Greeting On When switching on the appliance, the brand logo can be

deselected.

Factory setting Reset Resetting to the factory setting.

* depending on the features of your dishwasher

Setting Factory setting Infotext

by pressing Info button

15

Getting Started en-us

Home Connect™ System

This dishwasher is Wi-Fi capable and can be remotely

controlled via a mobile device.

If your dishwasher does not connect to the home

network, you can also operate the dishwasher manually

by pressing the buttons.

Refer to appliance overview for the location of the

buttons. a "Appliance overview" on page 11

Setting up the app

To be able to operate the appliance via Home Connect,

the Home Connect app must be installed on your mobile

device.

Observe the supplied Home Connect documents with

regard to this.

Follow the steps specified by the app to implement the

settings.

Setting up Home Connect

You can set your dishwasher by pressing the remote

start button h or proceed as follows:

1. Open the door.

2. Switch on the On/Off switch (.

3. Press Info button 8 for 3 seconds until the

following text is indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

4. Keep pressing button > h until the required setting

is indicated on the display window at the top @.

5. Make the setting with setting buttons + - X. See

table in section

6. Press and hold the Info button 8 for 3 seconds.

The chosen setting has now been stored.

WLAN |

In the WLAN menu you can activate the wireless

network connection with “on” and deactivate it with

“off”.

Notes

ʑ If you have selected the Wi-Fi “off” setting, the

“Network login” and “Connect to App” settings are

not available.

ʑ Remote control of the appliance requires a stable

wireless network connection.

Network login

In the “Network login” menu you can select between

“Automatic/WPS” and “Manual” to connect the

dishwasher to your home network. To do this, test the

WPS function on your router.

Refer to Home Connect leaflet for detailed instructions.

Automatic: Connect to the home network using the WPS

function of your router.

Manual: Connect your mobile device to the Home

Connect network. The network settings are then

manually entered using the Home Connect App to

connect to your home network.

Following successful connection, the following text is

indicated on the display window at the top @:

“Network login successful”.

Note: The “Network login” menu item is not available

unless you have activated WLAN.

Connect to App

The “Connect to App” menu option is not available

unless there was a connection to the home network.

The “Connect to App” setting establishes the link

between the dishwasher, App and your user account.

Following successful connection, the following text is

indicated on the display window at the top @:

“Connection to app successful”.

Refer to the Home Connect leaflet for further

information.

16

en-us Water softening system / special salt

Remote start button

Once the dishwasher is connected to the home network,

press the remote start button h to control the

dishwasher from your device.

If the dishwasher has still not logged into Home

Connect, access the Home Connect settings by

pressing the remote start button h.

Follow the directions in the supplied Home Connect

leaflet.

Note: Your dishwasher is protected against

unintentional operation. If the appliance door remains

open for more than 4 seconds after pressing the

Remote Start buttonh, the operation will be paused.

Press the Remote Start button h again and close the

appliance door to resume control. Also see section

Notes

ʑ When the login process is complete, the Remote

Start button h goes out.

ʑ To activate the remote control, press the Remote

Start button h.

ʑ If the Home Connect Assistant was aborted during

start-up, press the Remote Start button h again.

ʑ If the connection to the router fails, | flashes on the

display.

Wi-Fi without a connection to the Home

Connect server ƒ

Wi-Fi without a connect i on to the Home Connec t ser v er

You can use the Home Connect App to disconnect

from the Home Connect server.

The appliance is then locally connected to your mobile

device without any connection to the Home Connect

server.

Note: If you did not deactivate the connection to the

Home Connect server, check your Internet connection.

Remote diagnosis ~

Remot e di a gnos i s

Customer Service can use Remote Customer Service~

to access your appliance if you contact them.

Notes

ʑ You have to confirm Customer Service access on

your appliance.

ʑ You can switch off Remote Customer Service ~

using the On/Off switch ( or deactivate Customer

Service access in the Home Connect App.

+

Water softening system / special salt

To ensure good rinsing results, the dishwasher requires

soft water, i.e. water which is low in lime, otherwise

limescale will be deposited on the utensils and interior

container. Tap water above 7° dH (1.2 mmol/l) must be

softened. The water is softened with special salt

(regeneration salt) in the water softening system

of the dishwasher. The setting and therefore the

required amount of salt depends on the degree of

hardness of your tap water (see following water

hardness table).

Water hardness table

















:DWHU

KDUGQHVV

YDOXH(

VRIW

PHGLXP

KDUG

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

PPROO

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

6HWYDOXH

RQWKH

PDFKLQH

+DUGQHVV

UDQJH

KDUG

PHGLXP

VRIW

17

Water softening system / special salt en-us

Adjusting the water softening system

The amount of salt dispensed can be set from 0 to 62°E.

Salt is not required at the set value 0-8.

Set the softening system as follows:

1. Ask your local water utility company for the water

hardness value of the tap water.

2. Required setting can be found in the water hardness

table.

3. Open the door.

4. Switch on ON/OFF switch (.

5. Press Info button  8 for 3 seconds until the

following text is indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with W 3 sec.

6. Keep pressing button > ` until the water hardness

is indicated on the display window at the top @.

7. Make the selection with setting buttons + - X.

8. Press and hold the Info button 8 for 3 seconds.

The chosen setting has now been stored.

Using special salt

As soon as the low salt indicator P lights up on the

digital display, salt should be topped off. Refilling the

salt dispenser should be done before switching on the

appliance. This ensures that extra salt water is washed

out and will not corrode the rinsing tank.

NOTICE: Detergent will destroy the water softening

system! Never pour detergent into the salt dispenser.

Top off the salt as follows:

1. Undo the screw plug on the dispenser 1R.

2. Fill the dispenser with water (required only when

switching on the appliance for the first time).

3. Add salt as illustrated (do not use table salt or tablets).

The water is displaced and runs out.

For more information about buying dishwasher salt,

please contact Customer Service 1-800-944-2904.



18

en-us Rinse Aid

Using detergents with salt component

Det er ge nt with a sal t component

If combined detergents with a salt component

are used, special salt can usually be omitted up

to a water hardness of 21° dH (37° fH, 26° Clarke,

3.7 mmol/l). If the water hardness is over 21° dH, salt

must be used.

Switching off low salt indicator / water

softening system

Switchi ng of f wat er sof t eni ng syst em

If the use of combined detergents with a salt

component impairs the low salt indicator P on the

control panel or the text on the display window at the

top @ (enough salt for x rinse cycles), the displays

can be switched off.

Proceed as described under “Setting water softening

system” and set the value to 0-8. The water softening

system and salt refill indicator are now switched off.

,

R i n s e A i d

Rinse Aid

As soon as the low rinse aid indicator H lights up on

the control panel, rinse aid should be topped off.

The rinse aid is required for stain-free utensils and clear

glasses. Use only rinse aid which the manufacturer

designates as safe to use in domestic dishwashers.

Combined detergents with rinse aid component may be

used with soft to moderately hard water only (0-2 bands

on test strip or up to an °E value of 20). For moderately

hard to hard water (3 to 4 bands on test strip or °E value

of 21 or higher), rinse aid must be used.

Adding rinse aid

NOTICE: To avoid oversudsing or clogging, do not

overfill the rinse aid dispenser 9". Wipe up any spills

with a damp cloth.

1. Open the rinse aid dispenser 9" by pressing on the

latch of the lid and pulling it open.

2. Add liquid rinse aid to the dispenser 9" until it is

full. Do not overfill. Avoid spilling into air vent hole.





PD[

WFOU

BJS

19

Rinse Aid en-us

3. Close the lid. Lid must be fully closed until it clicks in

order to seal.

4. Wipe up any excess rinse aid that may have puddled

when the dispenser reservoir is full.

This prevents excessive frothing during the next wash

cycle. The indicator light will go out a few moments

after the dishwasher door is shut.

Tip: For easier pouring, remove lid from the rinse aid

bottle.

NOTICE: Do not fill the rinse aid dispenser 9" with

detergent. Doing so will damage the dishwasher.

Setting the amount of rinse aid used

The amount of rinse aid to be dispensed can be set from

0 to 6. Set the amount of rinse aid to be dispensed to 5

to obtain a very good drying result. Do not change the

amount of rinse aid unless there are streaks or water

stains on the utensils. Set a lower level to avoid streaks.

Set a higher level to avoid water stains.

Set the amount of rinse aid as follows:

1. Open the door.

2. Press on ON/OFF button (.

3. Press Info button  8 for 3 seconds until the

following text is indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with W 3 sec.

4. Keep pressing button > ` until the rinse aid

dispenser is indicated on the display window at the

top @.

5. Make the selection with setting buttons + - X.

6. Press and hold the Info button 8 for 3 seconds.

The chosen setting has now been stored.

Note: Do not change the amount of rinse aid unless

there are streaks (select lower setting) or water stains

(select higher setting) visible on the utensils.

Switching off rinse aid refill

indicator

If the use of combined detergents with a rinse aid

component impairs the low rinse aid indicator H on

the control panel (enough rinse aid for x rinse cycles),

the displays can be switched off.

Proceed as described under “Setting amount of rinse

aid” and select setting 0.

NOTICE: Using no rinse aid or setting the dispenser

to 0 may result in longer cycle times consuming more

energy and water. The higher temperatures can damage

fine china or glassware.

20

en-us Rinse Aid

Loading the Dishwasher

Dishware material

Note: Before using your dishwasher for the first time,

check the information in this section. Some items are

not dishwasher-safe and should be hand washed; others

require special loading.

Glass and silverware damage

Causes:

ʑ Glass type.

ʑ Type of dishwasher detergent.

ʑ Water temperature of the wash cycle.

Recommendation:

ʑ Use only glasses and porcelain which

the manufacturer designates as dishwasher-safe.

ʑ Use a detergent which protects silverware.

ʑ Use less intensive wash cycles and take glass and

silverware out of the dishwasher as soon as possible

after the wash cycle ends.

Recommended Precaution

Aluminum Colored anodized aluminum may

fade over time. Minerals in your

water may cause the aluminum to

darken or spot. This can usually

be removed with a soap-filled

steel wool pad.

China, Crystal,

Stoneware

Some hand-painted utensils may

discolor, fade or spot. Hand wash

these utensils. Position fragile

glassware so that it will not topple

over or come in contact with other

utensils during the wash cycle.

Glass Make sure to use dishwasher-

safe glass. Milk glass may

discolor or become yellow.

Non-stick Coatings Apply a light coating of vegetable

oil to non-stick surfaces after

drying.

Plastics Make sure the plasticware is

dishwasher-safe.

Stainless Steel,

Sterling Silver and

Silver Plates

Load these so they do not come

in contact with other metals,

stainless steel dishwasher tank

walls or the inner door.

Not

Recommended

Reason

Acrylic Crazing or small cracks

throughout the acrylic, may occur.

Adhesive-

Joined Pieces

Adhesives that join materials such

as plastic, wood, bone, steel,

copper, tin, etc. may loosen.

Bone-Handled

Utensils

Handles may separate.

Iron Iron will rust. Hand wash and dry

immediately.

Non-Dishware

Items

Your dishwasher is intended for

use in cleaning ONLY standard

household dishware and

kitchenware.

Pewter, Brass,

Bronze

These items will tarnish. Hand

wash and dry immediately.

Page is loading ...

Gaggenau DF250762 Owner's manual

This manual is also suitable for

Gaggenau DF250762 Owner's manual

Related papers

Other documents