Bowflex BXE226 Assembly & Owner's Manual

Category
Fitness, gymnastics & weight training
Type
Assembly & Owner's Manual
ASSEMBLY / OWNER’S MANUAL
BXE226
This product is compliant with the
applicable CE requirements.
Assembly / Owner’s Manual
2
Important Safety Instructions ................................. 3
Safety Warning Labels and Serial Number............. 5
Grounding Instructions ........................................... 6
Specications / Before Assembly ........................... 7
Parts ...................................................................... 8
Hardware / Tools .................................................... 9
Assembly ............................................................. 10
Moving Your Machine ........................................... 24
Leveling Your Machine ......................................... 24
Features ............................................................... 25
Connectivity with the Fitness App ........................ 29
Fitness Basics ...................................................... 33
Operations ............................................................ 40
Adjusting the Pedals ............................................ 40
Mounting and Dismounting .................................. 40
Power Up / Idle Mode .......................................... 41
Initial Setup .......................................................... 41
User Proles ........................................................ 41
Workout Programs ............................................... 42
Pausing or Stopping ............................................ 45
Workout Complete / Results ................................ 45
Fitness Score Display .......................................... 46
Celebrations ........................................................ 47
Machine Settings Mode ....................................... 48
Maintenance ......................................................... 49
Maintenance Parts ................................................ 50
Troubleshooting .................................................... 51
Body Weight Loss Guide ...................................... 54
You’re about to experience an incredible workout that can help you lose weight and reshape your entire body so you’ll look and feel better than ever
before. We thank you for trusting in the Bowex brand.
Use this Manual as a guide to getting started on your Bowex
®
workouts and for tips to keep your machine well maintained.
Yours in Health,
The Bowex Family
Table of Contents
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________ Date of Purchase ____________________
To register your product warranty, contact your local distributor.
For details regarding product warranty or if you have questions or problems with your product, please contact your local distributor. To nd your local
distributor, go to: www.nautilusinternational.com
Nautilus, Inc., www.nautilusinternational.com | Nautilus, Inc., 18225 NE Riverside Parkway, Portland, OR 97230 USA | Printed in China | © 2017
Nautilus, Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by
common law. Bowex, the B logo, Bowex Connect, Bowex Trainer, Switch Select, Nautilus, Schwinn, and Universal are trademarks owned by or
licensed to Nautilus, Inc. Loctite
®
, Polar
®
, OwnCode
®
, Android™, iTunes
®
, Google Play™, and Nut Thins
®
are trademarks of their respective owners.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. The
Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nautilus, Inc. is under
license.
ORIGINAL MANUAL - ENGLISH VERSION ONLY
Welcome to the Bowflex
®
BXE226
fitness machine!
Assembly / Owner’s Manual
3
Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all Warnings on this machine.
Carefully read and understand the Assembly/Owners Manual.
Carefully read and understand the Assembly instructions. Read and understand the complete Manual. Keep the Manual
for future reference.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this machine from the
electrical outlet immediately after using and before cleaning.
To decrease the risk of burns, electric shock, or injury to persons, read and understand the complete Assembly/Owner’s
Manual. Failure to follow these guidelines can cause a serious or possibly fatal electrical shock or other serious injury.
Keep bystanders and children away from the product you are assembling at all times.
Do not connect power supply to the machine until instructed to do so.
The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
Before each use, examine the machine for damage to power cord, loose parts or signs of wear. Do not use if found in this condition. Contact your
local distributor for repair information.
Do not drop or put objects into any opening of the machine.
Do not assemble this machine outdoors or in a wet or moist location.
Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not
do steps that involve heavy lifting or awkward movements on your own.
Set up this machine on a solid, level, horizontal surface.
Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can
cause a risk to users, keep the machine from operating correctly and void the warranty.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.
Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
Connect this machine to a properly earthed outlet only (see Earthing Instructions).
Keep the power cord away from heat sources and hot surfaces.
Do no operate where aerosol products are being used.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store in a safe place.
SAVE THESE INSTRUCTIONS.
Assembly / Owner’s Manual
4
Before using this equipment, obey the following warnings:
Read and understand the complete Manual. Keep the Manual for future reference.
Read and understand all Warnings on this machine. If at any time the Warning stickers become loose, unreadable or dislodged,
contact your local distributor for replacement stickers.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
wall outlet and/or the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the
power cord in a secure location.
Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to children.
Not intended for use by anyone under 14 years of age.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or
feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference
purposes only.
Before each use, examine this machine for damage to power cord, power receptacle, loose parts or signs of wear. Do not use if found in this
condition. Contact your local distributor for repair information.
Always connect the power cord to a circuit capable of handling 10 amperes with no other loads applied.
Connect this machine to a correctly earthed outlet; consult a licensed electrician for assistance.
Do not let liquids touch the electronic controller. If it does, the controller must be inspected and tested for safety by an approved technician before
it can be used again.
The electrical wiring for the residence in which the machine will be used must obey the applicable local and provincial requirements.
Maximum user weight limit: 170 kg (375 lbs). Do not use if you are over this weight.
This machine is for home use only.
Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers, feet, or other objects into moving parts of the
exercise equipment.
Always wear rubber soled athletic shoes when you use this machine. Do not use the machine with bare feet or only wearing socks.
Set up and operate this machine on a solid, level, horizontal surface.
Make the Foot Pedals stable before you step on them. Use caution when you step on and off the machine.
Do not operate this machine outdoors or in moist or wet locations.
Keep at least 0.6 m (24”) on each side of the machine clear. This is the recommended safe distance for access and passage around and
emergency dismounts from the machine. Keep third parties out of this space when machine is in use.
Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.
Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not hit the user.
Keep the Foot Pedals and Handlebars clean and dry.
Perform all regular and periodic maintenance procedures recommended in the Owner’s Manual.
Do not drop or put objects into any opening of the machine.
Keep power cord away from heat source and hot surfaces.
This machine must be connected to an appropriate, dedicated electrical circuit. Nothing else must be connected to the circuit.
Do not operate where aerosol products are being used.
Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed, incline angle and resistance level can
occur during workouts, and be attentive in order to avoid loss of balance and possible injury.
A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 14
away from this machine.
Assembly / Owner’s Manual
5
Safety Warning Labels and Serial Number
Serial Number
REVISIONS
ECO
REVISION
REV DESCRIPTION
APPROVED
DATE
TITLE.
PART NO.
REV.
SHEET 1 OF 1
SCALE: 1:1
DO NOT SCALE DRAWING
1. ALL ITEMS MUST BE RoHS COMPLIANT
2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.
3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.
4. ALL MACHINES SURFACES Ra 3.2 uM.
5. ALL APPLICABLE NAUTILUS STANDARDS AND
SPECIFICATIONS APPLY.
6. ALL DIMENSIONS ARE IN MILLIMETERS
7. ALL DUAL DIMENSIONS ARE IN INCH
UNLESS OTHERWISE SPECIFIED:
METRIC
THIRD ANGLE
PROJECTION
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M - 1994
2.5
1.5
0.75
0.25
X.
X.X
X.XX
X.XXX
ANGULAR
C
SIZE
This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights.
TOLERANCES.
DRAWN
DESIGNED
DATE
METRIC_C_REV G
NAUTILUS, INC.
16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683
LIFECYCLE
7-22-10
APPROVALS
- -
- - - -
WARRANTY ITEM:
A RELEASED
NPI 13149 DLOVELY
7-22-10
D.LOVELY
D.LOVELY
07 /22 / 2010
D.LOVELY
A
004-0930
CRUSH WARNING
21.78mm
54.8mm
MATERIAL.
COLOR.
DIE LINE
PMS 152
PMS 109
BLACK
WHITE
Labels must be created from an agency approved tamper proof labeling system
such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.
Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),
Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.
Product Specication
WARNING!
Keep hands and feet away.
Assembly / Owner’s Manual
6
Earthing Instructions
This product must be electrically earthed. If a malfunction occurs, correct earthing decreases the risk of electric shock. The power cord is equipped
with an equipment-earthing conductor, and must be connected to an outlet that is properly installed and earthed.
The electrical wiring must comply with all applicable local and provincial standards and requirements. Incorrect
connection of the equipment-earthing conductor can result in a risk of electric shock. Consult a licensed electrician if
you are not sure that the machine is correctly earthed. Do not change the plug on the machine – if it does not t the
outlet, have a correct outlet installed by a licensed electrician.
If you connect the machine to an outlet with RCBO (Residual-Current circuit Breaker with Overload protection), machine operation can cause the
circuit to trip. A Surge Protector Device is recommended to protect the machine.
!
If a Surge Protector Device (SPD) is used with this machine, be sure that it matches the power rating of this equipment (220-240V
AC). Do not connect other appliances or devices to the surge protector in combination with this machine.
Make sure that the product is connected to an outlet having the same conguration as the plug. Use the appropriate adapter
supplied with this product.
Assembly / Owner’s Manual
7
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a
minimum workout area of 200.7 cm x 317.5 cm (79” x 125”). Be sure that the workout space you are utilizing has adequate height clearance, taking
into consideration the height of the user and the maximum incline of the elliptical machine.
Basic Assembly
Follow these basic points when you assemble your
machine:
Read and understand the “Important Safety Instructions”
before assembly.
Collect all the pieces necessary for each assembly step.
Using the recommended wrenches, turn the bolts
and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed
otherwise.
When attaching 2 pieces, lightly lift and look through the
bolt holes to help insert the bolt through the holes.
The assembly requires 2 people.
Do not use any power tools for assembly.
Machine Mat
The Bowex™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your oor. The rubber
machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display errors. If possible, put your
Bowex™ Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, contact your local distributor.
Specifications / Before Assembly
Maximum User Weight: 170 kg (375 lbs)
Total Surface Area (footprint) of equipment: 15492 cm
2
Maximum Pedal Height - with full incline: 73.7 cm (29”)
Machine Weight: approx. 119 kg (263 lbs)
Power Requirements:
Operational Voltage: 220V - 240V AC @50Hz
Operating Current: 8 A
Heart Rate Chest Strap: 1 CR2032 battery
Complies with the following:
Connectivity:
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product, please follow the
prescribed methods at an approved waste center.
177.8 cm
(70”)
78.8 cm (31”)
196.6 cm (77”)
3.18m ( 125 )
2.01m
( 79” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
Assembly / Owner’s Manual
8
A right (R ”) and left (“ L ”) decal has been applied to some parts to assist with assembly.
Item Qty Description Item Qty Description
1 1 Console Assembly 16 1 Frame Assembly
2 1 Upper Handlebar, Right 17 1 Document Kit
3 1 Pivot Cover, Right Exterior 18 1 Power Cord
4 1 Pivot Cover, Right Interior 19 1 Pivot Cover, Left Exterior
5 1 Lower Handlebar, Right 20 1 Lower Handlebar, Left
6 1 Rail Assembly 21 1 Pivot Cover, Left Interior
7 1 Leg, Left 22 1 Upper Handlebar, Left
8 1 Pedal, Left 23 1 Front Stabilizer
9 2 Cap 24 1 Tray
10 1 Leg, Right 25 1 Upper Shroud, Left
11 1 Pedal, Right 26 1 Upper Shroud, Right
12 1 Pivot Rod 27 1 Console Mast Collar
13 1 Static Handlebars 28 1 Chest Strap
14 1 Console Shroud 29 1 Silicone Lubricant, Bottle
15 1 Console Mast
Parts
17
13
14
26
12
2
4
3
10
6
5
7
8
21
16
23
9
18
20
19
25
22
24
1
11
15
27
28
29
Assembly / Owner’s Manual
9
Hardware / Tools
Tools
Included Not Included
6mm - short
6mm - long
(recommended)
#2
13mm
15mm
19mm
Hardware
Item Qty Description Item Qty Description
A 29 Button Head Screw, M8x1.25x16 G 6 Pan Phillips Screw M3.9x16
B 31 Lock Washer, M8 H 8 Flat Washer, M8x24 Large
C 18 Flat Washer, M8x18 I 6 Wave Washer, M8
D 2 Lock Nut, M8 J 9 Curved Washer, M8
E 2 Button Head Screw, M8x1.25x25 K 2 Socket Head Cap Screw, M8x16
F 4 Pan Phillips Screw M3.9x38 L 2 Pivot Pin
Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware
after the proper assembly of your machine.
A B C D E F
G H
I
J
K L
Assembly / Owner’s Manual
10
Assembly
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving
these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
1. Safely Remove the Stabilizing Block(*) and Attach the Front Stabilizer to Frame Assembly
In order to avoid possible serious injury, when placing the Frame Assembly onto the Front Stabilizer be careful to avoid ngers or
hands being caught or pinched.
23
16
B
C
A
*
Assembly / Owner’s Manual
11
2. Attach Rail Assembly to Frame Assembly
In order to avoid possible serious injury, when attaching the Rail Assembly to the Frame Assembly be careful to avoid ngers or
hands being caught or pinched. Do not place ngers or hands below any pivoting parts of the Rail Assembly.
Note: Do not fully tighten until all hardware has been installed. Some parts can be slightly shifted to assist with alignment.
The plastic scratch guard strips on the Rails help to protect the nish during assembly.
X2
X2
B
C
A
D
C
E
C
6
Assembly / Owner’s Manual
12
3. Connect Cables and Attach Console Mast to Frame Assembly
Note: Do not crimp the Lower I/O Cable.
Be sure to FULLY tighten hardware with hex wrench when all hardware has been nger tightened.
A
15
B
C
Assembly / Owner’s Manual
13
4. Route Handlebar Cables through Upper Shrouds and Attach the Upper Shrouds and Tray
Note: Do not crimp the Cables. This step may require two people. Do not fully tighten until all hardware has been installed.
To assist, the short screws go into the metal Frame and the longer screws go through to the other Upper Shroud
26
25
X4
G
F
X2
24
#2
#2
Assembly / Owner’s Manual
14
5. Attach Legs and then the Caps to Frame Assembly
7
10
A
H
B
X2
6mm
I
X2
9
9
Assembly / Owner’s Manual
15
6. Attach the Lower and Upper Handlebar Arms
In order to avoid possible serious injury, when inserting the tube ends onto the Lower Handlebar Arms be careful to avoid ngers
or hands being caught or pinched.
Note: Do not crimp the Cables. A right (“ R ”) and left (“ L ”) decal has been applied to some parts to assist with assembly.
20
5
22
2
X8
B
A
J
6mm
“ Resistance “
“ Incline “
“ R ”
“ L
Assembly / Owner’s Manual
16
7. Insert Pivot Rod, Attach Interior Pivot Covers and Handlebar Arms, and Connect Cables
Be aware that the Handlebars are top heavy, and will want to pivot when attached onto the Pivot Rod. Be sure to stay out of the
path of the Handlebars and to gently allow it to pivot to a rest. Do not fully rotate the Handlebars or damage to the Cables will
occur.
Note: Do not crimp the Cables. Be sure to route the Cables through the additional opening of the Interior Pivot Covers. A decal has been
applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly.
Do not fully tighten hardware until cables have been connected.
I
X2
H
B
K
X2
G
G
12
4
21
X2
Assembly / Owner’s Manual
17
8. Attach Pedals to Frame Assembly
In order to avoid possible serious injury, when inserting the end of the Pedal into the Lower Handlebar Arm be careful to avoid
ngers or hands being caught or pinched. Be sure to stay out of the path of the Handlebars.
Note: Be sure the key on the Pivot Pin is fully set into the notch on the Lower Handlebar Arm. Slightly rotate the Pivot Pin to assist with
a proper set.
11
H
L
B
A
6mm
X2
L
H
A
B
X2
J
X2
Assembly / Owner’s Manual
18
9. Snap the Exterior Pivot Covers to Frame Assembly
3
19
Assembly / Owner’s Manual
19
10. Place the Console Mast Collar, and Remove the Hardware from the Console
Note: Do not crimp the Cables.
27
1
#2
*
X4
Assembly / Owner’s Manual
20
11. Route Cables through Static Handlebar and Attach to Console
Note: Do not crimp the Cables. Connect the Heart Rate Cables from the Console and the Static Handlebar.
13
#2
*
X4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Bowflex BXE226 Assembly & Owner's Manual

Category
Fitness, gymnastics & weight training
Type
Assembly & Owner's Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI