Targa LCD-Display 19" User manual

Brand: Targa

Model: LCD-Display 19"

Type: User manual

Targa LCD-Display 19" offers you a high-quality visual experience. This multiscan monitor is intended for private use only. Intended Use. Thanks to its high resolution of 1440 x 900 (max. refresh rate 75 Hz) and 5 ms response time, the monitor delivers sharp and smooth images, making it an excellent choice for gaming, watching movies, and working with graphics applications. The monitor is equipped with a VGA and an audio input, allowing you to connect it to your computer and enjoy both visual and audio content. Back Panel Connectors.

LCD-DISPLAY 19"

User manual

Targa Visionary LCD 19-6 Wide

6_tft_19-6_0806.qxd:hb_sc_nb_traveller-kit.qxd 27.06.2008 10:01 Uhr Seite 1

Targa Visionary LCD 19-6 Wide

English

Operating Notes

First of all, many thanks for choosing this high-end multiscan

monitor. Before starting installation, please read this manual

completely.

Intended Use

This TFT monitor is an IT electronic device. It may only be used for

private use, not industrial or other commercial purposes.

Furthermore, the device may not be used outdoors or in tropical

climates. Only connection cables and external devices may be used

that comply with safety standards and the electromagnetic

compatibility and shielding quality of this device. This device fulfils

all that relates to CE Conformity, relevant norms and standards.

Any modifications to the equipment other than recommended

changes by the manufacturer may lead to the result that these

directives are not met any more. Only use the accessories

recommended by the manufacturer.

Conformity

The LCD screen LCD 19-6 Wide has been tested

and approved for compliance with the basic and

other relevant requirements of the EMC Directive

2004/108/EC, as well as the Low-voltage Directive

2006/95/EC.

Targa Visionary LCD 19-6 Wide

English

Table of Contents

Operating Notes............................................................................... 1

Intended Use ............................................................................................1

Conformity ................................................................................................ 1

Table of Contents ............................................................................ 2

Safety Information............................................................................ 3

Warnings...................................................................................................3

Disposal of Old Devices ...........................................................................5

Getting started ................................................................................. 6

Back Panel Connectors ............................................................................ 7

Quick Guide .............................................................................................. 7

Setting the Resolution ..............................................................................8

Front Panel Controls................................................................................. 9

Setting the Menu Language ...................................................................10

Button Function Overview ......................................................................10

OSD Menu ..................................................................................... 12

Advanced....................................................................................... 16

Supported resolutions.............................................................................16

Wall-Mounting.........................................................................................17

Technical Specifications .........................................................................18

Troubleshooting...................................................................................... 19

Pixel Error Classes .................................................................................19

Targa Visionary LCD 19-6 Wide

English

Safety Information

During the manufacturing and testing of this monitor, the safety of

the future user was our main goal. However, inadequate operation

or installation can cause damage to the device and harm to the

user. Therefore, please first read the following warnings prior to

starting with its installation. Proceed exactly as described in the

instructions. Keep this manual for any future reference.

Warnings

 Connect the monitor to a grounded wall outlet only, with a

rating identical to those on the label of the back panel of the

unit. If you are not sure about the electrical output, please

contact a qualified electrician or your local electrical company.

 Warning: The wall outlet must be within easy reach and next to

the device.

 Do not use any extension cords.

 Only use accessories recommended by the manufacturer

(cables, stand, cart, etc.).

 Move the device carefully to avoid it from tipping over.

 For your own safety, remember that the monitor will be fully

separated from the mains only when the power cord has been

disconnected from the wall outlet.

 During a thunderstorm, unplug the device from the mains

power by unplugging the power cord. Do this also when you are

not going to use the device for a long period of time.



Do not attempt to repair the monitor yourself. Any repair must

be performed by a qualified technician.

Targa Visionary LCD 19-6 Wide

English



Do not open the monitor’s housing.

The high-voltage

components inside the device may produce an electric shock

even after the power cord has been disconnected.



Do not use the device if the casing is damaged. If this happens,

it must first be examined by authorized service personnel.

 Place the monitor in a clean, dry environment.

 Do not place any recipients containing liquids (beverages,

vases, etc.) onto or next to the device.

 Do not place any fire sources (e.g. burning candles) on or near

the device.

 Disconnect the power supply immediately if liquid gets into the

device and seek the help of a service technician.



Unplug the device from the mains before cleaning the monitor.

First spray an ammonia-free detergent onto a cloth to slightly

dampen it, and do not spray it onto the display itself.

 Do not place the monitor next to any magnetic objects, electric

motors, TV sets or transformers.

 Do not place the device near heat sources such as radiators,

ovens or other appliances emitting heat.



Do not place heavy objects on the cable or power supply.

Position the cables so that they cannot obstruct or catch

anyone.

 The output connectors of the connected devices must be within

easy reach and next to the monitor.



Always make sure there is sufficient ventilation. Do not place

any device onto the display preventing proper ventilation and

cooling.

Targa Visionary LCD 19-6 Wide

English



If you notice any smoke, unusual noise or strange smells,

switch off the LCD display immediately and pull the plug out

from the wall outlet. Contact customer service. It is very

dangerous to continue using the LCD display under these

conditions.

 To avoid electric shock or fire, prevent this product from being

exposed to rain, dripping or splashing.



Children: electrical appliances do not belong in the hands of

children. Do not allow children to use electrical devices when

not under supervision. Children may not comprehend the

presence of potential risks. Keep all packaging away from

children as this can cause suffocation.

 If you are not using the device within the Republic of Germany,

you must observe the regulations and laws in the country of

use.

Disposal of Old Devices

Devices marked with this symbol are subject to the

European Directive 2002/96/EC. All electric and electronic

devices must be disposed of separately from household

waste at established bodies. Avoid hazards to the

environment and dangers to your personal health by disposing of

the device properly. For further information about proper disposal,

contact your local government, disposal bodies or the shop where

you bought the device.

Targa Visionary LCD 19-6 Wide

English

Getting started

Mount the supplied socket to the base of your LCD 19-6 Wide as

indicated on the bottom of the base.

Please check that delivery contents are complete using the list

below:

1 - Monitor

2 - VGA cable

3 - Audio cable

4 - Power cord

5 - User’s Manual

(not illustrated)

Targa Visionary LCD 19-6 Wide

English

Back Panel Connectors

6 7 8 9

Quick Guide

1. Connecting the Video Cable

Power your monitor and computer off.

Use the VGA cable (2) to connect the computer to the port (9)

of the monitor.

2. Connecting the Audio Cable

Use the audio cable (3) to connect the computer’s Audio Out

port to the audio input (8) of your monitor.

3. Connecting the Power Cord

Connect the power cord (4) to the power receptacle (7) of the

monitor. Connect the other end to a wall outlet.

4. Powering On

To power the monitor on, toggle the power switch (6) located

on the back panel of the unit to “I”. If the front-panel power

indicator (16) does not light, press the On/Standby switch (15)

on the front panel of the unit.

Targa Visionary LCD 19-6 Wide

English

Setting the Resolution

The recommended screen resolution for your LCD 19-6 Wide is

1440 x 900 (max. refresh rate 75 Hz). In the following we will

explain the resolution setting for the operating systems

Windows

XP and Windows Vista™.

For Microsoft

Windows

XP:

- Right-click on the Desktop.

- Click on “Properties”.

- Click on the “Settings” tab.

- Use the ruler to select the proper screen resolution.

- Confirm the setting by clicking “OK”.

For Microsoft

Windows Vista™:

- Right-click on the Desktop.

- Click on “Customize”.

- Click on “Display”.

- Use the ruler to select the proper screen resolution.

- Confirm the setting by clicking “OK”.

If the recommended resolution of 1440 x 900 is not

available on your computer, please update the driver of

the graphics card. Contact the manufacturer of the

computer or the graphics card.

Targa Visionary LCD 19-6 Wide

English

Front Panel Controls

11 13 15

12 14 16

11. Display / hide the OSD menu.

12. Decrease value / navigate downwards

13. Increase value / navigate upwards

14. Confirm setting

15. On/Standby Switch

16. Power indicator

Targa Visionary LCD 19-6 Wide

English

Setting the Menu Language

You can display the OSD (On Screen Display) menu in your local

language. Proceed as follows:

1. Press button 1 (11) on the monitor.

2. Press the

 button (12) to select the menu option “Setup

Menu”.

3. Press button 2 (14).

The “Setup Menu” opens and the item “Language Select”

should be highlighted otherwise press the

 (12) or  (13)

buttons to select it.

4. Press button 2 (14).

5. Press the

 button (12) to scroll downwards or press  (13)

to scroll upwards to select the desired display language.

6. Press button 2 (14) to confirm your selection.

7. Wait until the menu disappears or press button 1 (11) twice

to exit the menu immediately.

Button Function Overview

You can use the control buttons to access the most common

settings directly.

Setting Brightness and Contrast

1. Press the

 (12) or  (13) buttons. The brightness and

contrast menu will appear.

2. Press the

 (12) or  (13) buttons to select a menu option

(Brightness will be disabled while DCR is on).

3. Press button 2 (14) to enable the selected menu item.

Targa Visionary LCD 19-6 Wide

English

4. Press the  (12) or  (13) buttons to select the desired

value.

5. Wait until the menu disappears or press button 1 (11) twice

to exit the menu immediately.

DCR means „Dynamic Contrast Ratio“ and offers an

optimum contrast by adjusting the display backlight

automatically depending on the picture contents.

Auto Image Adjust

Automatically adjusts the settings for the horizontal and vertical

position, the horizontal size as well as the fine control and

sharpness.

To do this, press button 2.

Locking the On/Standby Switch

Press and hold the 1 and

 buttons simultaneously until the status

bar is completed to enable or disable the On/Standby switch lock.

The lock will disable the Power On/Standby switch (15) located on

the front panel of the device.

OSD Lock

Press and hold the 1 and

 buttons simultaneously until the status

bar is completed to enable or disable the OSD lock. The OSD lock

will prevent the OSD menu from being displayed.

Targa Visionary LCD 19-6 Wide

English

OSD Menu

Via the OSD menu you can access multiple settings to customize

the LCD 19-6 Wide according to your and your computer’s

requirements.

Use the buttons 11 to 14 (as described on page 9) to navigate the

menu.

Start with the main menu by pressing button 1 on the monitor. Press

the

 and  buttons to choose a menu item, and press button 2 to

confirm the selection.

Auto Fit

Automatically adjusts the settings for the horizontal and

vertical position, the horizontal size as well as the fine

control and sharpness.

Targa Visionary LCD 19-6 Wide

English

Contrast/Brightness

Opens the Contrast and Brightness menu.

Press the

 and  buttons to choose an option and

press button 2 to confirm. Then press the

 or  buttons

to select the desired value. The Brightness option will be

disabled while DCR is on.

DCR means „Dynamic Contrast Ratio“ and offers an

optimum contrast by adjusting the display backlight

automatically depending on the picture contents.

Audio Adjust

Press the

 and  buttons to choose between the

options Volume and Mute. Press 2 to confirm. Press



 to change the value.

The option Volume allows you to adjust the volume of the

built-in speaker, the option “Mute” lets you disable the

sound.

Color Adjust

Choose between the following options:

9300K: Adds blue to the picture achieving a cooler white.

6500K: Adds red to the picture achieving a warmer white.

5400K: Adds green to the picture achieving a darker

colour tint.

User Adjust: Custom settings for red (R), green (G) and

blue (B). Press button 2 to select the desired colour and

press the

 or  buttons to adjust the selected colour.

Targa Visionary LCD 19-6 Wide

English

Information

Shows information about the input signal coming from

your computer’s graphics card as well as the model and

serial number of your monitor.

Manual Image Adjust:

To manually adjust the picture position.

Horizontal Size sets the horizontal picture size.

H./V. Position sets the horizontal and vertical picture

position.

Fine Tune sets the picture delay and therefore the

sharpness.

Sharpness (available only if the set resolution does not

match the recommended resolution of 1440x900). If

necessary, re-adjust the sharpness.

Setup Menu

Choose between the following options:

Language Select: Here you select the menu language.

Resolution Notice: If you enable this function, a

message will remind you every 30 seconds to set the

optimum picture resolution. This message appears only if

the set resolution does not match the recommended

resolution of 1440x900.

OSD Position: Press button 2 to toggle between

horizontal and vertical movement. Press

 or  to move

the OSD menu upwards, downwards, to the left or to the

right.

Targa Visionary LCD 19-6 Wide

English

OSD Time Out: After the set time, the OSD menu will

disappear if you don’t perform any further settings. You

can select values between 5, 15, 30 and 60 seconds.

OSD Background Off: Press button 2 to enable or

disable the coloured background for the OSD display.

Recall: Restores the factory-default video and audio

configuration. The selected language will not change.

Targa Visionary LCD 19-6 Wide

English

Advanced

Supported resolutions

VESA 640 x 480 @ 75Hz

MAC 640 x 480 @ 67Hz

VGA 640 x 480 @ 70Hz

VGA 720 x 400 @ 70Hz

VESA 800 x 600 @ 56Hz

VESA 800 x 600 @ 60Hz

VESA 800 x 600 @ 72Hz

VESA 800 x 600 @ 75Hz

VESA 848 x 480 @ 60Hz

VESA 1024 x 768 @ 60Hz

MAC 1024 x 768 @ 70Hz

VESA 1024 x 768 @ 75Hz

VESA 1152 x 864 @ 75Hz

VESA 1280 x 960 @ 60Hz

VESA 1280 x 720 @ 60Hz

VESA 1280 x 768 @ 60Hz

VESA 1280 x 768 @ 75Hz

VESA 1280 x 1024 @ 60Hz

VESA 1280 x 1024 @ 75Hz

VESA 1360 x 768 @ 60Hz

VESA 1440 x 900 @ 60Hz

VESA 1440 x 900 @ 75Hz

Warning: Do not set your computer’s graphics card refresh rate to a

value exceeding the above maximum limits otherwise you risk

seriously damaging your monitor.

Targa Visionary LCD 19-6 Wide

English

Wall-Mounting

You can mount your LCD 19-6 Wide to the wall by using a VESA

wall mount with a 100 x 100 mm receptacle. To do so, disassemble

the base as follows:

1. Power the device off and unplug all cables and connectors.

For the following steps you’ll need a conventional Philips

screwdriver.

2. Lie a soft cloth on an empty, level table and carefully place

the LCD 19-6 Wide with its front on it.

3. Loosen the monitor socket by carefully pushing the six

hooks inwards and pulling the socket towards the bottom.

4. Loosen the six screws located inside the base. Next you can

pull the base off downwards. You can remove the copper

loop as well as the cable contained in the base together with

the base.

5. Install the VESA wall mount on the back of the monitor.

Follow the installation instructions that came with your wall

mount kit.

Note: Keep the base, the socket and the screws in a safe place in

case you need to reassemble the base again.

Targa Visionary LCD 19-6 Wide

English

Technical Specifications

LCD Display

19.0” Wide TFT (16:10)

Power Management

Complies with Energy Star,

VESA DPMS-compatible = 1 W

Power on consumption: max. 45 W

Supported Resolution

max. 1440 x 900

Refresh rate max. 75 Hz

Pixel size

0.285 x 0.285 mm

Display Colours

16.2 million

Viewing angle

160°/160° (CR > 10)

Inclination

0°~20°

Contrast Ratio

2000 : 1 (dynamic)

Brightness

300 cd/m² (typical)

Response time

5 ms (typical)

Active Screen Area

410 mm x 256 mm

Temperature

Operation: 0°C ~ + 35°C

Storage -20°C ~ +60°C

Compliance

CE, TCO ’99, ISO 13406-2,

Energy-Star, TÜV GS,

Works with Windows Vista™

2002/95/EG (RoHS),

Input voltage

100-240 VAC, 50/60 Hz

Input current

1.5 A

Speaker

1W x 2

VESA Wall Mount

Receptacle 100 x 100 mm

Signal Input

15-pin D-Sub VGA (Analogue)

Dimensions (WxHxD):

443 mm x 382 mm x 200 mm

Weight

4.6 kg

Targa Visionary LCD 19-6 Wide

English

Troubleshooting

No power

 Make sure that the power cord is properly connected to the wall

outlet and that the cables to the monitor are fixed properly into

their respective ports.

 Connect a different electrical appliance to the wall outlet to

verify that it is working properly.

 Double-check all cable connections.

Power OK but no picture

 Make sure that the supplied video cable is properly connected

to the graphics card output connector of your computer and to

the monitor. If necessary, re-connect it.

 Adjust the brightness.

Wrong or distorted colours

 If a colour (red, green, blue) is missing, check the connection of

the video cable. Loose, bent or broken pins in the connector

may deteriorate the signal transmission.

 Connect the monitor to a different computer.

Pixel Error Classes

Pixels are single dots making up the picture that appears on the

screen. One pixel always consists of three sub-pixels for displaying

the basic colours (red, green and blue).

The Pixel Error Classes are rated from Level I (very good) to Level

IV (bad quality). Your LCD 19-6 Wide belongs to Error Class II and

therefore offers a high-quality display. Within the Error Classes a

limited number of pixel may present errors. There are three types of

errors:

Type 1: Continuous lighting pixel (a bright, white dot), even when

it should not light.

Page is loading ...

Targa LCD-Display 19" User manual

Targa LCD-Display 19" User manual

Targa LCD-Display 19" User manual

Other documents