PRODUCT INFORMATION
Technical data and price changes reserved.
Page 2/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
High quality turntable mat made of a
cork-rubber mix
Isolating the critical parts of your turntable is the
most important thing for achieving fantastic soun-
ding vinyl playback. A key step is isolating the actual
vinyl record from the turntable platter itself. Quality
cartridges are extremely sensitive, and can easily
detect interactions between your record and the
platter surface.
Standard felt mats have poor anti-static
characteristics, which attracts dust to your precious
vinyl. They are often too thin for eective acoustic
control of platters, especially those made from me-
tal.
On the other hand, thick rubber mats can isolate
the record from your turntable too much. This ma-
kes the record vulnerable to static build-up, and can
result in noise and clicks during playback.
As the name suggests, Cork & Rubber-it uses a
carefully blended mix of cork and rubber to oer
the ultimate acoustic control of rubber alongside
the anti-static properties of cork. Cork & Rubber it
is available in 1mm or 3mm thicknesses, to suit all
turntables. The two thickness options allow you to
choose what’s best for your turntable, and cater for
your personal listening tastes at the same time.
Recommendation: Try the thick mat on thin metal
platters and the thin one on dense or heavy platters!