2. Sharp
  3. PN80TH5
PN80TH5

Sharp PN80TH5, PN-80TH5 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Sharp PN80TH5 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are required to dismantle the Sharp PN80TH5?
    How many printed circuit boards (PCBs) are there in the Sharp PN80TH5?
    Where are the electrolyte capacitors located in the Sharp PN80TH5?
    What type of battery does the Sharp PN80TH5 use?
    Can the front glass be removed from the LCD module?
PN-80TH5 Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN-80TH5
PN-80TH5 Dismantle Instruction
2
Table of contents
1. Scope.................................................................................................................. 3
2. Tools for dismantling ............................................................................................... 3
3. Dismantle Procedure .............................................................................................. 3
4. Back covers .......................................................................................................... 4
5. Printed circuit boards ............................................................................................. 5
6. Battery ................................................................................................................ 5
7. LCD Module .......................................................................................................... 7
8. Capacitors ............................................................................................................ 8
9. Parts List ............................................................................................................. 9
PN-80TH5 Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove the shielding.
3. Remove Printed circuit boards (section 5)
4. Remove Battery (section 6)
5. Dismantle LCD (section 7)
6. Remove Electrolyte Capacitors (section 8)
PN-80TH5 Dismantle Instruction
4
4. Back covers
2 back covers (right/center/left) can be removed by screw driver.
PN-80TH5 Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main I/F PWB (1pcs) LED driver PWB (1pcs)
Touch PWB 1(1pcs) Touch PWB 2 (1pcs) Conversion PWB (1pcs)
Power PWB (1pcs) AC Relay PWB (1pcs) 5V Power PWB (1pcs)
T-CON PWB (1pcs) Key PWB (1pcs)
PN-80TH5 Dismantle Instruction
6
6. Battery
This model uses CR2032 Lithium Coin battery on Main I/F PWB and AAA battery for remote control.
Battery can easily be removed from the battery holder.
PN-80TH5 Dismantle Instruction
7
7. LCD Module
- LCD Dismantle procedure
After you have removed the PWB´s and dismantled the LCD Module please take out the cables from the
LCD module.
Due to direct bonding technology the front glass cannot be removed from the LCD.
LCD
PN-80TH5 Dismantle Instruction
8
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB,
LED driver PWB and 5V Power PWB.
These capacitors can be removed by using nipper to cut the leads.
On Power PWB
On LED driver PWB
On 5V Power PWB
PN-80TH5 Dismantle Instruction
9
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Parts
Note
LCD
80inch LCD module
Printed Circuit Boards
Main I/F PWB
LED driver PWB
Power PWB
Touch PWB 1
Touch PWB 2
Conversion PWB
AC Relay PWB
5V Power PWB
Key PWB
T-CON PWB
Battery
Lithium Coin Battery CR2032
Battery (AAA) of remote control
Electrolyte capacitors
(height >25mm, diameter >25mm)
On Power PWB
On LED driver PWB
On 5V Power PWB
External electric cables
2 kinds of Power Cord
- CEE 7 (for EU)
- Type-BF (for UK)
/