Raytheon RM808 AIS Operating instructions
- Type
- Operating instructions
Raytheon Marine GmbH
High Seas Products
Postfach 1166
D - 24100 Kiel
Germany
Tel +49-4 31-30 19-0
Fax +49-4 31-30 19-291
Email [email protected]
www.raytheon-marine.de
RM 808 AIS Short Operator Manual Page 1 Version 1.0
Automatic Identification System AIS
Type RM 808 AIS
Short Operation Manual
RM 808 AIS Installation Manual Version 1.0.2 Page 2 of 27
Please read this first!
Warning:
Although Raytheon Marine strives for accuracy in all its publications; this material may
contain errors or omissions, and is subject to change without prior notice. Raytheon Marine
shall not be made liable for any specific, indirect, incidental or consequential damages as a
result of its use. Raytheon Marine components may only be used in safety of life devices or
systems, with the express written approval of Raytheon Marine, as the failure of such
components could cause the failure of the Raytheon Marine device or system. If these fail, it
is reasonable to assume that the safety of the user or other persons may be endangered.
Copying of this document, and giving it to others and the use or communication of the contents
thereof, are forbidden without express authority. Offenders are liable to the payment of damages.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu
Schadenersatz.
Toute communication ou reproduction de ce document, toute exploitation ou communication
de son contenu sont interdites, sauf autorisation expresse. Tout manquement à cette règle
est illicite et expose son auteur au versement de dommages et intérêts.
Sin nuestra expresa autorización, queda terminantemente prohibida la reproducción total o parcial
de este documento, así como su uso indebido y/o su exhibición o comunicación a terceros. De los
infractores se exigirá el correspondiente resarcimiento de daños y perjuicios..
RM 808 AIS Short Operator Manual Page 3 Version 1.0
History of Changes .................................................................................................................................................................................4
1. RM 808 AIS Components and Interfaces.......................................................................................................................................5
2. RM 808 AIS User Interface...............................................................................................................................................................6
3. Navigation Screen..............................................................................................................................................................................7
4. Inputing Voyage Related Data – (User Password Protected).....................................................................................................8
5. Setting Ship Related Data – (User Password Protected).........................................................................................................10
6. Configuring the RM 808 – (User Password Protected).............................................................................................................12
7. Changing the Service Password – (Service Password Protected)..........................................................................................15
8. Changing the MMSI / IMO Numbers ............................................................................................................................................17
9. Writing an Addressed Safety Related Message to an individual Vessel................................................................................19
10. Writing a Broadcast Safety Related Message to all Vessels .................................................................................................21
11. Safety Functions – MOB and SRM Buttons..............................................................................................................................23
11.1. MOB Person over Board...........................................................................................................................................23
11.2. SRM - Safety Related Message...............................................................................................................................24
12. Display Settings.............................................................................................................................................................................26
13. Contact and Support Information................................................................................................................................................27
Type
RM 808 AIS
Short Operation Manual
Index Page Number
RM 808 AIS Short Operator Manual Page 4 Version 1.0
History of Changes
Date
Version
Status
Comments
Responsible
2002-12-04 1.0 Released Latest release amendments A. Lesch
RM 808 AIS Short Operator Manual Page 5 Version 1.0
1. RM 808 AIS Components and Interfaces
RM 808 AIS Short Operator Manual Page 6 Version 1.0
2. RM 808 AIS User Interface
Display
Soft Keys [M1]
–
[M8]
Safety Keys
Cursor
Cross
Keyboard
Enter Key
Navigation Screen
Header (max. 3 lines)
______________________________
Navigation Screen or
MENU
Structure
(Content 13 lines)
RM 808 AIS Short Operator Manual Page 7 Version 1.0
3. Navigation Screen
Latitude &
Longitude
Own speed over Ground
Own course over Ground
UTC Time
GPS Solution
Received Vessels
(Vessel Listing)
> Indicates further Vessels in Listing
LAT:N 1^27.845'ExtSOG:34.6kn 11/26/2002
LON:E 0^21.289'IntCOG:173.0^ 10:52:26
IntGPS: 3D ExtHDT:222^ Reg6 A/
001/021..ShipName....RNG.BRG..SOG..COG..
1>DOREEN-----------> N/A 120 22.2 301.5
2>FINE EAGLE------->0.00 N/A 13.1 359.9
3>SYLVAEPSILON----->0.10 23 32.1 203.2
4>ESSOTOKYO-------->0.43 99 10.0 120.3
5>OLYMPIAHIGHWAY FE>0.59 342 21.2 50.0
6>SANEI------------>0.80 272 32.1 270.1
7>KATOO------------>1.00 321 21.2 200.8
8>OLYMPIA PALACE--->1.34 277 [BASESTAT]
9>MINILOG---------->1.96 201 21.7 102.2
10>ALIBRAHIMYA----->2.66 340 22.1 30.3
11>TITANIC--------->2.75 121 N/A N/A
12>BWRTZ123-------->3.36 66 24.1 2.9>
RM 808 AIS Short Operator Manual Page 8 Version 1.0
4. Inputing Voyage Related Data – (User Password Protected)
Note:
The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation
Select “Voyage Settings” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 3 on the
keyboard
The Password Query Field appears. Input User Password and press [Enter].
N 1^20' E 0^13' |1
> N/A|2>0.00|3>0.10nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM|Select->| | |<-Back
N 1^31' E 0^24' |1>0.01|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
RM 808 AIS Short Operator Manual Page 9 Version 1.0
Scroll the Voyage Data Fields with [Enter] and input own vessel data. Select a default Cargo Type and
NavStat Setting with the cursor buttons [Left] & [Right].
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing [Exit]. Press
[Back] to return to the Main Menu without saving any changes.
N 1^18' E 0^12' |1>0.01|2>1.30|3>1.80nm
*********** Voyage Settings ************
Cargo :<N/A or harmless>
Draught :24.8m
PoB :1
Dest. :CASABLANCA
ETA :10/13 12:31
NavStat.:Engaged in fishing
----------------------------------------
| Save | | | Back
RM 808 AIS Short Operator Manual Page 10 Version 1.0
5. Setting Ship Related Data – (User Password Protected)
Select “Ship Settings” with cursor button [Up] & [Down] or press Nr. 4 on the keyboard.
Note: The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial
operation
Input User Password and press [Enter].
N 1^23' E 0^16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^23' E 0^16' |1>0.01|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
RM 808 AIS Short Operator Manual Page 11 Version 1.0
Scroll the Ship Settings Fields with [Enter] and input own vessel data. Select a default Ship Type with the
cursor button [Left] & [Right].
Save the new settings by pressing [Save]. By pressing [Back] you return to the Main Menu Screen without
saving any changes.
N 1^19' E 0^12' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
/\ +
CallSign:D11233 / \|
ShipName:ANDREA DORIA | |
Length :220m | A
Beam :43m | x--+
RefPtExt:A200 B20 C10 D33m | | B
RefPtInt:A190 B30 C20 D23m +-C-+D-+
ShipType: Pilot vessel
----------------------------------------
| Save | | | Back
RM 808 AIS Short Operator Manual Page 12 Version 1.0
6. Configuring the RM 808 – (User Password Protected)
Select “Transponder Configuration” with the cursor button [Up] & [Down] or press Nr. 5 on the keyboard.
Note:
The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation
Input default User Password and press [Enter].
N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
RM 808 AIS Short Operator Manual Page 13 Version 1.0
Select desired Submenu with the cursor buttons [Up] & [Down] or by pressing the appropriate number on
the keyboard.
Change User Password: Select Submenu 1
Input new User Password (4 – 8 characters) and press [Enter] to save.
Press [Back] to return to the Submenu without saving.
N 1^20' E 0^13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 5. Transponder Configuration
-----| |
| +- 1. Change User Password
View | +- 2. Region Settings
| +- 3. Alarm Settings
-----| +- 4. Interrogation Settings
| +- 5. Sensor Settings
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^21' E 0^14' |1>0.01|2>1.30|3>1.80nm
********* Change User Password *********
Enter new password : *****
Repeat new password: *****
{Length: 4..8 characters}
----------------------------------------
| Enter | | | Back
RM 808 AIS Short Operator Manual Page 14 Version 1.0
Alarm Settings: Select Submenu 3
Press [Change] to enable or disable the Alarms Function. [Back] takes you to the Submenu without saving,
by pressing [Save] the changes are stored and by pressing [Exit] you return to the Submenu.
Note:
It is highly recommended to enable the Alarm Function.
Long Range Interrogation: Select Submenu 4
Navigate the Input Fields with [Up] & [Down] and press [Change] to enable or disable interrogation
requests on individual data fields. [AllOn] sets all data fields free for interrogation. Press [Back] to return to
the Submenu without saving, and [Save] to save settings and return to the Submenu.
N 1^21' E 0^15' |1>0.01|2>1.30|3>1.80nm
************ Alarm Settings ************
on/off
Alarm generation: [*]/[ ]
Note: This setting also affects output
on ECDIS port.
----------------------------------------
| Save | Change | | Back
N 1^21' E 0^14' |1>0.01|2>1.30|3>1.80nm
******** Interrogation Settings ********
on/off auto/manu
LR-Interrogation: [*]/[ ] [*]/[ ]
Data for Interrogation:
Name,Call,IMO [*] Cargo [*]
Length,Beam,Type [*] Draught [*]
POS [*] PoB [*]
SOG [*] Dest,ETA [*]
COG [*] Date,Time [*]
----------------------------------------
| Save | Change | All On | Back
RM 808 AIS Short Operator Manual Page 15 Version 1.0
7. Changing the Service Password – (Service Password Protected)
Note:
The User Password is set to “NAUT” – please reconfigure it immediately after Transponder initial operation
Select “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on
the keyboard.
Enter default Service Password
N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^24' E 0^17' |1>0.01|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Service password protected!
Please enter service password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
RM 808 AIS Short Operator Manual Page 16 Version 1.0
Select Submenu 1: Change Service Password.
Input new Service Password (4 – 8 characters) and press [Enter] to save.
Press [Back] to return to the Submenu without saving.
N 1^23' E 0^17' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Restore Factory Settings
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^19' E 0^13' |1> N/A|2>0.00|3>0.10nm
******* Change Service Password ********
Enter new password :
Repeat new password:
{Length: 4..8 characters}
----------------------------------------
| Enter | | | Back
RM 808 AIS Short Operator Manual Page 17 Version 1.0
8. Changing the MMSI / IMO Numbers
Select “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] or press Nr. 6 on
the keyboard.
Select Submenu 3 “Change MMSI/IMO” with cursor button [Up] & [Down] by pressing Nr. 3 on the
keyboard.
N 1^19' E 0^13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^21' E 0^14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Restore Factory Settings
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
RM 808 AIS Short Operator Manual Page 18 Version 1.0
Input new MMSI / IMO Numbers and press [Save] to store input data.
Press [Back] to return to the Submenu without saving.
Note:
Data input is limited to 9 characters.
N 1^21' E 0^14' |1> N/A|2>0.00|3>0.10nm
********** Change MMSI / IMO ***********
MMSI :1193046
IMO No.:303174162
----------------------------------------
NUM| Save | | | Back
RM 808 AIS Short Operator Manual Page 19 Version 1.0
9. Writing an Addressed Safety Related Message to an individual Vessel
Select the Main Menu Screen with the [Menu] Button.
Select Messages with the cursor button [Up] & [Down] or press number Nr. 1 on the keyboard. Then select
“Write Addressed SRM”.
Select Message Recipient with cursor button [Up] & [Down]. Press [Exit] to return to the
previous screen.
N 1^46' E 0^39' |
1>0.10|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM |Select->| | <-Back
N 1^19' E 0^12' |1>0.10|2>1.30|3>1.80nm
|----------------------------------
| 1. Messages
-----| |
| +- 1. Write Addressed SRM
View | +- 2. Write Broadcast SRM
| +- 3. Inbox History
-----| +- 4. Inbox SRM
| +- 5. Inbox ALR (valid only)
Msg. | +- 6. Inbox LRI
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | | <-Back
RM 808 AIS Short Operator Manual Page 20 Version 1.0
Input Message Text to selected vessel and press [Send]. The [Back] takes you back to the
Navigation Screen without sending a message.
After message transmission, the Transmission Status Screen is displayed.
After Messaging is completed, the RM 808 AIS automatically returns to the Navigation Screen
N 1^26' E 0^20' |1>0.10|2>1.30|3>1.80nm
************ Write Message *************
..ShipName......Dist..SOG..COG..CallSign
1>DOREEN-------> N/A 22.2 301.5 DORET6W
2>FINE EAGLE--->0.00 13.1 359.9 OEX1538
3>SYLVAEPSILON->0.10 32.1 203.2 ND4RX
4>ESSOTOKYO---->0.43 10.0 120.3 ZA9A
5>OLYMPIAHIGHWA>0.59 21.2 50.0 3FSH4
6>SANEI-------->0.80 32.1 270.1 YJQX9
7>KATOO-------->1.00 21.2 200.8 A4F317
8>OLYMPIA PALAC>1.34 [BASESTAT] 4DSW
9>MINILOG------>1.96 21.7 102.2 FOR6
10>ALIBRAHIMYA->2.66 22.1 30.3 DEZ42
11>TITANIC----->2.75 N/A N/A FSG >
----------------------------------------
NUM| Select | | | Back
N 1^20' E 0^13' |1>0.10|2>1.30|3>1.80nm
************ Write Message *************
Addressed SRM 129
SendTo:5004 (DOREEN)
Text: TEXT INPUT IS POSSIBLE HERE
----------------------------------------
auto/ A / B /A+B
Channel: [*]/[ ]/[ ]/[ ]
----------------------------------------
| Send |<Channel |Channel> | Back
LAT:N 1^18.963'ExtSOG:34.6kn 11/21/2002
LON:E 0^12.408'IntCOG:173.0 09:11:08
Ships:21 /B IntGPS: 3D Region6
++++++++++++++++++++++++++++++++++++++++
Transmission Status
[+] AIS1:OK, acknowledgement received
[ ] AIS2:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | |<-Back
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
Raytheon RM808 AIS Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Raytheon RM808 AIS Operating instructions
-
-
-
-
-
-
-
-
Other documents
-
ACR Electronics NAUTICAST 2662 User manual
-
-
-
Limit L10APRO Datasheet
-
-
Wrebbit 3d Puzzle Titanic 440 Pcs User manual
-
SANEI G903 Hard reset manual
-
Simrad V5035 Class A/Inland AIS Installation guide
-
IEI Technology SRM-150 User manual
-
Saab R5 SUPREME AIS Operation & Installation Manual
