User Manual
1x3 Multi-Format Video DA
MFS-2213
V.2013MF-2213.00
Introduction
AVLINK MFS-2213 is high performance multi-format 1x3 distribution amplifier for HDMI / DVI / VGA /
Component / Composite / S-Video signals. The MFS-2213 offers flexibility and convenience multi signal
interface used. You can then choose any 4 different modules install to MFS-2213.
Features
1. I/O modules design
2. Internal universal power supply
3. 1U rack design
Package Contents
1x MFS-2213
1 user manual
1x Power cord
2x rack rails
6x screws
MFS-2213
Function MFS-2213
Module Optional (MAX for 4 Module)
Power 100VAC~240VAC, 50/60Hz, internal
Housing Metal
Weight 3180 g
Dimensions (LxWxH) 440x240x43 mm
Daughter board modules:
HS-13 HDMI 1x3 distribution amplifier
DS-13 DVI 1x3 distribution amplifier
VS-13MS VGA 1x3 distribution amplifier
YS-13 Component(RCA) 1x3 distribution amplifier
SCS-13 S-Video 1x3 distribution amplifier and Composite(RCA) 1x3 distribution amplifier
SBS-13 S-Video 1x3 distribution amplifier and Composite(BNC) 1x3 distribution amplifier
HS-13 Module(HDMI)
1. Supports 12-bit Deep Full HD / Full 3D / 4Kx2K video
2. Supports HDCP
3. Can be cascaded
4. DDC copy from port 1
Specifications
Function HS-13
HDMI Input Connector
(A-Type Female)
1
HDMI Output Connector
(A-Type Female)
3
Max. Resolution 4Kx2K@30Hz (8-bit) or 1080p@60Hz (12-bit)
Cable Distance
(Device to Monitor)
10 m (Max.)
Signal Type Standard HDMI Signal
DS-13 Module(DVI)
1. Supports up to UXGA video
2. Supports HDCP
3. Supports DVI-D Single Link
4. Can be cascaded
5. DDC copy from port 1
Specifications
Function DS-13
DVI Input Connector
(DVI Female)
1
DVI Output Connector
(DVI Female)
3
Max. Resolution 1600x1200@60Hz
Cable Distance
(Device to Monitor)
10 m (Max.)
Signal Type Standard DVI Signal
VS-13MS Module(VGA)
1. With 400MHz pixel frequency
2. Supports DDC,DDC2,DDC2B(For video out port 1)
3. Input/Output DC coupling
4. Support Multi-Sync video type
5. Can be cascaded
Specifications
Function VS-13MS
Video Input Connector
(HD-15 Female)
1
Video Output Connector
(HD-15 Female)
3
Video input Impedance 75Ω
Synchronous Signal
Input Voltage : 0.5Vp-p~5Vp-p
Output Voltage : TTL 5V
Input Impedance : 510Ω
Polarity : Positive or Negative(Identical with input)
Max. Resolution 2048x1536@60Hz
Cable Distance
(Device to Monitor)
65 m (Max.)
Signal Type Standard VGA,SVGA,XGA,QXGA,UXGA Signal
Note:
a. If you install the DDC monitor for the Distribution Amplifier, the rest of monitors must be the same
resolution as the DDC monitor.
b. Even though you are allowed to cascade the Distribution Amplifier with varied ports, the image might
become unstable if cascade too many tiers of the Distribution Amplifier.
YS-13 Module(Component)
1. Supports 480p/576i/576p/720p/1080i/1080p
2. Compliant with the component RCA video
3. Extends the signal up to 15 meter
4. Input/Output AC coupling
5. Can be cascaded
Specifications
Function YS-13
Video Input Connector
(RCA Female)
1 Set(YPbPr)
Video Output Connector
(RCA Female)
3 Set(YPbPr)
Input Impedance 75Ω
Max. Resolution 1080P@60Hz
Cable Distance
(Device to Monitor)
15 m
Signal Type Standard Component Signal
Note:
Even though you are allowed to cascade the Distribution Amplifier with several ports, the image might
become unstable if one cascades too many tiers to the Distribution Amplifier.
SCS-13 Module(S-Video & RCA Composite)
1. The module include S-Video and RCA Composite 1x3 Distribution Amplifier
2. Compliant with the composite RCA video
3. Compliant with the specification S-Video
4. Input/Output AC coupling
5. Can be cascaded
Specifications
Function SCS-13
Video Input Connector 1(4 pin Mini-DIN Female) 1(RCA Female)
Video Output Connector 3(4 pin Mini-DIN Female) 3(RCA Female)
Input Impedance 75Ω
Cable Distance
(Device to Monitor)
15 m
Signal Type Standard S-Video Signal Standard Composite Signal
Note:
Even though you are allowed to cascade the Distribution Amplifier with several ports, the image might
become unstable if one cascades too many tiers to the Distribution Amplifier.
SBS-13 Module(S-Video & BNC Composite)
1. The module include S-Video and BNC Composite 1x3 Distribution Amplifier
2. Compliant with the composite BNC video
3. Compliant with the specification S-Video
4. Input/Output AC coupling
5. Can be cascaded
Specifications
Function SBS-13
Video Input Connector 1(4 pin Mini-DIN Female) 1(BNC Female)
Video Output Connector 3(4 pin Mini-DIN Female) 3(BNC Female)
Input Impedance 75Ω
Cable Distance
(Device to Monitor)
15 m
Signal Type Standard S-Video Signal Standard Composite Signal
Note:
Even though you are allowed to cascade the Distribution Amplifier with several ports, the image might
become unstable if one cascades too many tiers to the Distribution Amplifier.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks or
registered trademarks belonging to their respective companies.
/
