Samsung PS-42D4SM Quick start guide

Type
Quick start guide

This manual is also suitable for

Becoming Familiar with the Remote Control
PDP ON
NUMERIC BUTTONS
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
Press it again , or
-
/+ button
to turn the sound back on.
DISPLAY AND CLOSE THE MENU/
RETURN TO THE PREVIOUS MENU
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SCREEN EFFECT SELECTION
(BURNING PROTECTION)
PICTURE MODE SELECTION
EXTERNAL INPUT SELECTION
CURRENT TIME DISPLAY
SOUND MODE SELECTION
EXIT FROM ANY DISPLAY
PREVIOUS CHANNEL
(NOT AVAILABLE FOR THIS MONITOR)
CHANGE CONFIRMATION
INFORMATION DISPLAY
PIP FUNCTIONS;
-PIP ON/OFF
- SIZE SELECTION (SIZE)
- LOCATION SELECTION (LOCATE)
- INPUT SOURCE SELECTION
(SOURCE)
- INTERCHANGE THE MAIN AND THE
SUB PICTURE (SWAP)
- SOUND SELECTION (S.SEL)
PICTURE SIZE SELECTION
PICTURE STILL
SETTING THE TIMER
AUTO ADJUSTMENT IN PC MODE
PDP OFF
ZOOM/PANNING MENU DISPLAY
(ONLY PC MODE)
M
ULTIPLE DISPLAY CONTROL
VOLUME DECREASE
NEXT CHANNEL
(NOT AVAILABLE FOR THIS MONITOR)
The remote control is used mainly to:
Change sources and adjust the volume
Set up the PDP using the on-screen menu system
The performance of the remote control may be affected by bright light.
English
1_BN68-00740A-00Eng 8/9/04 2:44 PM Page 8
Connecting to the Audio/Video Input
The "VIDEO IN" connectors are used for the equipment with an Composite Video output, such as
video game devices or video disc players.
Rear of the PDP
(Input)
VCR
Decoder /
Video game device
Video disc player
Satellite receiver
DVD
Camcorder
Rear of the PDP
(Output)
The "VIDEO OUT" connectors are used for the equipment with an
Composite Video input, such as a camcorder or VCR.
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to
VIDEO IN
and
the target VCR to
VIDEO OUT
so that you can redirect the signal from
VIDEO IN
to
VIDEO OUT
.
When you wish to record a programme, connect the receiver to
VIDEO IN
and the VCR to
VIDEO
OUT
so that you can redirect the signal from
VIDEO IN
to
VIDEO OUT
.
Whenever you connect an audio or video system to your
PDP, ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English
1_BN68-00740A-00Eng 8/9/04 2:44 PM Page 35
Connecting to the S-Video Input
The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Rear of the PDP
Camcorder
VCR
To play picture and sound, both the S-VIDEO and RCA connectors must be used.
and
Connecting to the DVD/DTV RECEIVER Input
The “COMPONENT1 IN” (or “R(Pr)/G(Y)/B(Pb)” (video) and “AUDIO”) connectors are used for
equipment with a DVD/ DTV RECEIVER output. (480i, 480p, 720p, 1080i)
Pr / Y / Pb
and
Rear of the PDP
or
Y / Pb / Pr
L / R
or
Digital Set-Top Box
DVD
English
1_BN68-00740A-00Eng 8/9/04 2:44 PM Page 36
Connecting to the RGB(PC) Input
Connecting to the DVI Input
The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output.
Personal Computer
and
Rear of the PDP
The “RGB1(PC1) IN” (or
“R(Pr)/G(Y)/B(Pb)/H/V”) and “AUDIO”
connectors are used for interfacing with your PC.
Personal Computer
Rear of the PDP
or
English
1_BN68-00740A-00Eng 8/9/04 2:44 PM Page 37
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Samsung PS-42D4SM Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI