2. Vivo
  3. STAND-SK01
STAND-SK01

Vivo STAND-SK01 User manual

  • Hello! I am an AI chatbot trained to assist you with the Vivo STAND-SK01 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
    
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371-5654
-  
 
phillips screwdriver
   
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -!""## $%""  
(x1)
Wire
& (x2)
Wire Hook
(x2)
Clip
(x2)
Plate
- (x2)
M5x12
- (x2)
M5x20
- (x2)
M4x12
- & (x2)
M4x20
- ' (x2)
M8x20
- ( (x2)
M8x40
- ) (x2)
M6x12
- * (x2)
M6x20
- + (x2)
Washer
-, (x4)
Flathea Screw
-, (x4)
Lon" Screw
- , & (x4)
Anchor
- - (x1)
Allen Wrench
% 
2

Fasten Wire Hooks (B) to TV using Washers (M-I) and Bolts (M-A -
M-H). The required size of the bolt will depend on the design of
your TV.
. 
Attach Clips (C) to edge of table top, use a screwdriver to secure
them.
 /
 / 0  1
. &
Run Wire (A) through Wire Hooks (B) and holes of Clips (C). Use Allen
Wrench (M-J) to secure the wire into the Clips.
 / 0  1
. /
Attach Plates (D) to edge of table using Flathead Screws (W-A).
 / 0  1
. 2
If placing TV in front of concrete or brick wall, mark drill locations in
wall using Plates (D) as a reference. Drill 1.6" (40mm) deep holes
using a 9/32" (7mm) drill bit and press Concrete Anchors (W-B) into
holes. Attach Plates to wall using Long Screws (W-A).
 / 0  1
. /&
Run Wire (A) through Wire Hooks (B) and holes of Plates (D). Use Allen
Wrench (M-J) to secure the wire into the Plates.
3
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: help@vivo-us.com
Live chat: www.vivo-us.com
Call: 1-800-371-5654
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
 ,  
   
Last updated: 05/22/18
 / 0  1
. 2&
Run Wire (A) through Wire Hooks (B) and holes of Plates (D) on the
wall. Use Allen Wrench (M-J) to secure the wire into the Plates.
4
/