2. Virtu USA
  3. MD-2072-WMRO-WH
MD-2072-WMRO-WH

Virtu USA MD-2072-WMRO-WH Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Virtu USA MD-2072-WMRO-WH Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Prior to installation, please check the items you
have received against the packing list. Report any
missing items to your local dealer immediately.
Protect all surfaces from sharp objects, high heat
sources, direct prolonged sunlight and chemical
hazards.
Professional installation is recommended.
www.virtuusa.com
MD-2072
PARTS LIST
TopBasinCabinet Mirror
(may differ depending on purchase)
INSTALLATION INSTRUCTIONS
SKU:
REV3.19.18
~77"
18~27"
www.virtuusa.com
MD-2072
INSTALLATION INSTRUCTIONS
SKU:
REQUIRED TOOLS
DRAWER REMOVAL
DOOR ADJUSTMENT
REMOVAL
1. Pull tabs toward center
2. Lift and pull drawer out
RE-INSTALL
1. Align drawer hole with slider stud
2. Push tabs back in to secure
Adjusts the door vertically Adjusts the door horizontally Adjusts the door forward and backwards
Locate the slider tabs on the underside
of the drawer.
REV3.19.18
www.virtuusa.com
MD-2072
INSTALLATION INSTRUCTIONS
SKU:
Apply adhesive around the top edges of the cabinet Carefully place the top over the cabinet
Apply sealant around the top edge of
the sink rim. Flip top over and align
basin to cutout. Screw in threaded
bolts to each block. Secure plates with
washer then wing nuts.
Measure desired mirror
height and mark
Measure the distance
between the mirror’s hooks
and make a second mark.
Install screws into stud or use
drywall anchors.
Lift and hang mirror
Align and center
Basin InstallationMirror Installation
Top Installation
REV3.19.18
/