idh by St. Simons 18055-3NL Installation guide

Type
Installation guide

This manual is also suitable for

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist”
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
Ornate Twist Bell
Item# 18055
Dimensions:
Bell
Length: 4-1/2”
Width: 3-3/16”
Height: 2”
c/c: 3-5/8”
Diameter: 2-7/8”
Turnkey
Plate: 1-5/8” x 4-1/4”
Length: 4
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Determine and mark the doorbell mounting location.
2. Drill a hole large enough to accommodate the twist spindle.
3. Put the turnkey in place through the hole. Mark and drill pilot
holes.
4. Attach the twist plate to the door using the screws provided.
5. On the inside of the door, fit the doorbell onto the twist
mechanism and mark the positions of the mounting holes.
6. Drill pilot holes and attach the doorbell to the door.
Catalog Section: I
Ornate Twist Bell
Item# 18055
4-1/2
3-3/16
1-5/8
4-1/4
  • Page 1 1

idh by St. Simons 18055-3NL Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI