Toto TEL101-D10ET#CP Installation guide

Toto
Brand
Toto
Model
TEL101-D10ET#CP
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

TEL101 Series
Standard EcoPower
®
Faucet
FEATURES
• Self-generating hydropowered EcoPower system
• No minimum daily usage requirement
• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smooth
and consistent water distribution
• Vandal resistant aerator housing
• Durable chrome plated spout body
• Single-hole mount
• Kit includes spout body, controller box , and
mounting hardware - less supply lines
• Equipped with 1.0gpm flow control
MODELS
COLORS/FINISHES
• #CP Polished Chrome
• #BN Brushed Nickel
• #PN Polished Nickel
TEL101-D10E
• TELS101 (Standard Spout)
• TELC101-D10E (Controller: 0.18gpc,
10 sec on-demand)
TEL101-D10EM
• TEL101-D10E (Standard Spout Kit)
• TLM10 (Mixing Valve)
TEL101-D10ET
• TEL101-D10E (Standard Spout Kit)
• TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have
hydropowered self-generating, EcoPower System.
The faucet shall have maximum of 10 seconds on-
demand flow (0.18gpc). Product shall have anti-scald
shape memory alloy thermostatic mixing valve (-ET
models only). The faucet shall have self-adjusting
sensor.
CODES/STANDARDS
• Operates below federally mandated consumption
limit of 0.25gpc
• Complies to California Green Building Code,
CALGreen of 0.20 gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1,
and NSF372-2011
• Certifications: IAPMO(cUPC), State of
Massachusetts, and others
• California Green Code and City of Los Angeles
Water Efficiency Ordinance
• ADA compliant
• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25%
lead or less)
* For codes and standards of mixing valves TLM10 and TLT10,
please refer to corresponding product spec sheet
LOW-LEAD
OPTIONAL ACCESSORIES
• THP3158#CP - 4" Cover Plate
• THP3159#CP - 8" Cover Plate
• THP3237 - Swivel Coupling
EcoPower
Standard EcoPower
®
Faucet
#SS-01079, v.08
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL101 Series
NOTE
Following the federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
faucets can be rated for water consumption based on
two categories: Flow Rate and Water Consumption.
TOTO uses the water consumption standard because
it is the most accurate method of measuring water
use. TOTO faucets also comply with the CALGreen
Guideline of water usage.
Water Saving
On-Demand [10 sec.] faucet (0.18gpc)
Federal Standard (0.25gpc) – 28% less
CAL Green (0.20gpc) – 10% less
3-15/16”
(100mm)
(50mm)
2-15/16”
(74mm)
4-1/2”
(114mm)
2” (50mm)
Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
Standard Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .
** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).
SPECIFICATIONS
EcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure:
15psi (100kPa)
Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.18 gpc* - max 10 second On-Demand**
(0.18 gpc = 1.0 gpm x 10/60 seconds)
Equipped with 1.0 gpm flow control
Three years
Power Supply
Sensor Detection
Range
Water Supply Pressure
Water Supply
Inlet Temperature
Range
Ambient Temperature
Humidity
Flow Rate
Warranty
3-15/16”
(100mm)
(50mm)
2-15/16”
(74mm)
4-1/2”
(114mm)
2” (50mm)
Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”( Φ 42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1/2” (63mm)
1-7/16”
(36mm)
2-13/16” (71mm)
7/8”
(23mm)
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10R)
38
ROUGH-IN DIMENSIONS / BOSQUEJO /
ROBINETTERIE BRUTE/DIMENSÕES APROXIMADAS
Finished wall
1-1/16” (27mm)
1-1/16”
(27mm)
6-7/16”
(163mm)
3-3/4”
(95mm)
5”
(126mm)
2”
(50mm)
3-15/16”
(100mm)
2”
(50mm)
2-15/16”
(74mm)
4-1/2”
(114mm)
2” (50mm)
Max deck thickness
4-13/16”
(122mm)
1-9/16”
(40mm)
Max deck thickness
Ø2-3/8”
(Ø60mm)
Faucet hole Ø1-3/8” (Ø35mm)
4-15/16”
(125mm)
3-3/4”
(95mm)
6-3/4”
(168mm)
2”
(50mm)
5-13/16”
(147mm)
5-3/4”
(145mm)
9-3/16”
(231mm)
STD
Axiom
Helix-Wall
Helix
Gooseneck
7-11/16”
(194mm)
7-5/16”
(186mm)
Ø2-3/16”
(Ø55mm)
Faucet hole Ø1-3/8” (Ø35mm)
2”
(50mm)
2” (50mm)
Max deck thickness
TELS105
TELS101
TELS115
TELS111
4-15/16”
(125mm)
6-1/2”
(165mm)
9-1/2”
(238mm)
Helix-M
Faucet hole Ø1-3/8” (Ø35mm)
2”
(50mm)
2” (50mm)
Max deck thickness
TELS125
TELS121
Faucet hole Ø1-3/8” (Ø35mm)
2” (50mm)
Max deck thickness
Faucet hole Ø1-3/8” (Ø35mm)
TELS135
TELS131
TELS145
TELS141
TELS155
TELS151
80°
60°
60°
60°
60°
30°
L=25-9/16”
(L=650mm)
L=37-3/8”
(L=950mm)
L=23-5/8”
(L=600mm)
L=41-5/16”
(L=1050mm)
L=45-1/4”
(L=1150mm)
L=31-1/2”
(L=800mm)
L=26-3/4”
(L=680mm)
L=39-3/8”
(L=1000mm)
L=29-9/16”
(L=750mm)
L=41-5/16”
(L=1050mm)
L=43-5/16”
(L=1100mm)
L=25-9/16”
(L=650mm)
G1/2 compatible with ½ NPSM
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8”(Φ42mm)
3-13/16”(98mm)
  • Page 1 1
  • Page 2 2

Toto TEL101-D10ET#CP Installation guide

Toto
Brand
Toto
Model
TEL101-D10ET#CP
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents