1.5 Automatic Power-off
—The unit will be automatically switched off if it is left idle within the automatic power-off period.
Press
button to restart it.
—When inputting and editing data, if it is left idle within the automatic power-off period, it will be
automatically powered off, and the data you have inputted or edited will not be saved.
—The alarm will still function upon the set time even if the unit is power off.
1.6 Category of Content
4 main Categories such as Dictionary, Organizer, Calculator and Reference are particularly designed for your
convenient operation.
—Press
to highlight an item, and press
to access the application, you can also
press the relevant numeric key directly.
—Press
to switch to main menu of the previous or next category.
—Press
to toggle among the categories circularly.
—Press
to switch display language between Chinese and English.
1.7 Cautions
—Avoid humidity. Never let water or other liquids flow into the unit.
—Don’t place the unit under direct sunlight or near heat.
—Don’t repair the unit by yourself! Bring the malfunctioned unit to our Customer Service Center
for repair.
—Prevent the unit from falling down on the ground, bending or strong impact.
—Don’t apply strong detergent cleaning agents to clean the unit.
—Don’t touch the screen with sharp-headed objects.
—Before doing reset or sending the unit for repair, please keep a copy of all important data so as to re-input them later.
1.8 Trouble-shooting
Question : Automatic power-off period is too short, can it be changed?
Answer : Enter the automatic power-off setting mode, set the automatic power-off time longer or set it to “0”, if you
set it to “0”, the Automatic power-off will be out of function. Automatic power-off can help you save
power.
Question : Why can’t the inputting data be saved?
Answer : Perhaps there isn’t enough memory to save data, you may delete some useless data to get enough free
memory.
Question : Why can’t the unit be switched on?
Answer : Maybe there are the following reasons:
(1) Perhaps the battery voltage is weak, please replace the new batteries.
(2) Perhaps the method of replacing batteries is wrong, please make sure that the polarities of the batteries
are correct.
(3) Perhaps the battery compartment door is open, please close it.
(4) Perhaps the battery compartment lock is open, please push the battery compartment lock to the position
of “lock”.