Clinton Electronics CE-CMDH is an adaptor that allows two monitors to be mounted back to back from a Clinton Electronics telescoping ceiling mount monitor pole. It is compatible with CE-CM-SX-3, CE-CM-SX-6, and CE-CM-LX-12 models. The adaptor has a maximum weight capacity of 35 pounds and is intended for use with monitors 20” or smaller. Assembly requires a #2 Phillips screwdriver, 7mm wrench, and 7/16” wrench. The kit includes #8-32 x 3/8” pan head screws, 1/4-20 x 2” hex cap screws, 1/4-20 lock nuts, and 1/4” flat washers.
Clinton Electronics CE-CMDH is an adaptor that allows two monitors to be mounted back to back from a Clinton Electronics telescoping ceiling mount monitor pole. It is compatible with CE-CM-SX-3, CE-CM-SX-6, and CE-CM-LX-12 models. The adaptor has a maximum weight capacity of 35 pounds and is intended for use with monitors 20” or smaller. Assembly requires a #2 Phillips screwdriver, 7mm wrench, and 7/16” wrench. The kit includes #8-32 x 3/8” pan head screws, 1/4-20 x 2” hex cap screws, 1/4-20 lock nuts, and 1/4” flat washers.
Clinton Electronics CE-CMDH is an adaptor that allows two monitors to be mounted back to back from a Clinton Electronics telescoping ceiling mount monitor pole. It is compatible with CE-CM-SX-3, CE-CM-SX-6, and CE-CM-LX-12 models. The adaptor has a maximum weight capacity of 35 pounds and is intended for use with monitors 20” or smaller. Assembly requires a #2 Phillips screwdriver, 7mm wrench, and 7/16” wrench. The kit includes #8-32 x 3/8” pan head screws, 1/4-20 x 2” hex cap screws, 1/4-20 lock nuts, and 1/4” flat washers.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI