Laser AO-PT0888 FAQ

Hello! I am an AI chatbot trained to assist you with the Laser AO-PT0888 FAQ. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Q: I've bought a Laser 6-way power board from you recently (item # AO-PTO888).

The board seems to be working OK, but when i look at the lights on it the "PROTECTED" light

is NOT lighted up. Does this mean there is a fault? Is my stuff protected or not? I am not sure

what it means. The Red Grounded light is on. The Reset switch is on. The Green

PROTECTED Light is NOT ON! It was on when I first plugged it in, but now its not. What does

this mean?

A: If the “PROTECTED” light is not illuminated when the board is plugged in to the power,

there is a good change that the board has been subjected to a power surge or spike that has

rendered the protection on the board un serviceable.

While the board can be continued to be used as a general power board it will no longer be

able to protect devices that are attached.