TOSHIBA
ColorTelevision
COLOR TRERH
, ,, , '
, ', , , ' ', ,' ,, , ,,, , , i' , ,
I,,'IH ,,i H ',i,',',1',,i ,i, , ,, , ,, ,'1 , ,,.... ,, Ii , ,, , i,, ,i ,1,, h ,1' ,i
,, ,,', ,, H ', ,,1,, ,, ,,1,, , ,,' H ,' , ,,,, H HHHH,,'' , , I '
, , ,' ', , ',, ,,,,,'
" ,, ,1' i, H " , ' , , ' ",, I ,, , , ' , ' , , , ,,
, ' , '' ' , ,',
, ,, ,' ,, , ' , '1 ,,I H ,
' , , ', , ', , ' ,,
, ,I , ',', , , ,,'1 ' , ,I ¢,
' ,'l H, ','i,' I , II ',h' ' , 'hii',H . I ' ' ,, ,, 'l I ,, ',' ,I I
, , , , , ,,, ,
,, , ,, , ,, , , , , H
Dear Customer,
Thankyou for purchasing this Toshiba TV.This manual will
help you use the many exciting features of your new TV.
Before operating the W, please read this manual
completely, and keep it nearby for future reference.
SafetyPrecautions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK,
DO NOT EXPOSETHIS APPLIANCE TORAIN OR
MOISTURE.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER.SERViCEABLE PARTS iNSiDE. REFER
SERVICING TO QUALiFiED SERVICE PERSONNEL.
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
NOTETOCAW INSTALLERSINTHEUSA
Thisis a reminder to call the CATVsystem installer's
attention to Article 820-40 of the NEC,which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical. Foradditional antenna grounding information,
see items 25 and 26 on page 4.
NOTICEOFPOSSIBLEADVERSEEFFECTS
ONTVPICTURETUBE
If a fixed (_non-moving)pattern remains on the TV
screen for long periods of time, the image can become
permanently engrained in the picture tube. This type of
damage is NOT COVERED BY YOUR WARRANTY.
See item 33 on page 4.
ChildSafety
ItMakesADifference
WhereYourW Stands
0301
2
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
The Issue
53Ifyouare likemostAmericans,youhaveaTVin yourhome.
Manyhomes,in fact,havemorethanoneTV.
53Thehometheaterentertainmentexperienceisagrowing
trend,and largerTVsarepopularpurchases;however,they
arenotalwayssupportedontheproperTVstands.
53SometimesTVsareimproperlysecuredor inappropriately
situatedon dressers,bookcases,shelves,desks,audio
speakers,chests,or carts.As aresult,TVsmayfallover,
causingunnecessaryinjury.
ToshibaCares!
53Theconsumerelectronicsindustry
iscommittedto makinghome
entertainmentenjoyableandsafe.
53TheConsumerElectronics
Associationformedthe Home
EntertainmentSupportSafety
Committee,comprisedofTVand
consumerelectronicsfurniture
manufacturers,toadvocate
children'ssafetyandeducate
consumersandtheirfamiliesabout
televisionsafety.
Tune Into Safety
53OnesizedoesNOTfit all!Useappropriate
furniture largeenoughtosupporttheweightof your
TV(andotherelectroniccomponents).
53Useappropriateanglebraces,straps,and anchorsto secure
yourfurnitureto thewail(butneverscrewanythingdirectly
intotheTV).
Carefullyreadand understandtheotherenclosed
instructionsfor properuseof this product.
Donotallowchildrentoclimb onor playwith furniture
andTVs.
53
53
53
53
53
Avoidplacinganyitemontop ofyourTV(suchasa VCR,
remotecontrol,ortoy) that acuriouschildmayreachfor.
Rememberthat childrencanbecomeexcitedwhilewatching
a programand canpotentiallypushorpull a rv over.
Shareour safetymessageaboutthis hiddenhazardofthe
home with your family and friends. Thank you!
2500 WilsonBlvd
Arlington, VA22201U.SA.
Tel 703=907=7600Fax703-902-7690
wwwOE.0rg
CEAis theSponsor,Producerand
Managerof theInternationalCES_
Important Safety Instructions
1) Read these instructions, f _
2)Keep these instructions. _Z_3_ _/_
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near
water.
6) Clean only with a dry cloth.
7) Do not block any ventilation
openings. Install inaccordance with
the manufacturer's instructions.
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the othel: A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third Wideplug
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during C_'_
lightning storms or when ____L_ _ %--_Y_
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been_
damaged in any way, such as power supply _
cord or plug is damaged, liquid has _.'_.2_
been spilled or objects have fallen into II -_ It 7".'_'!'_
the apparatus, the apparatus has been _
exposed to rain or moisture, does not --_LE2_
operate normally, or has been dropped._
15) CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
Installation,Care,and Service
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
16) Never modify this equipment, Changes or modifications
may void: a) the warranty, and b) the user's authority to
operate this equipment under the rules of the Federal
Communications Commission,
17) DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
18) Never place or store the TV in direct ,4_ S_*_"
sunlight; hot, humid areas; areas __
subject to excessive dust or vibration; ____
or locations with temperatures at or
below 41°F (5°C).
19) Always place the TV on the floor __
or a sturdy, level, stable sudace that _]_-_
consupportthewe,ghtoftheun,t,
20) Never place items such
aquariums, or candles on top
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse,
23) Never overload wall outlets and
extension cords.
030_
3
24) Always operate this equipment from
a 120VAC,60 Hzpower source only,
/
25) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
/ Antenna lead-inwi_e
Eiectdc sep4ceequipment \
Groundclamps
conductors
(NECSection810-21)
_- Powerservicegroundin
electrode system (NECArt 250 Part H)
26) /m\ DANGER: RISK OF SERIOUS PERSONAL
/ | \ INJURY OR DEATH!
_" Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines Never locate the antenna
near overhead power lines or other electrical circuits
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
27) Always sit approximately 10-25 feet away from the TV and
as directly in front of it as possible The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29) _\ WARNING: RISK OF ELECTRIC SHOCK.=
/ | \ Never spill liquids or push objects of any kind
into the TV cabinet slots
030]
4
30) [?his item applies to projection TVs only] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6to 7 hours to
allow the condensation to evaporate.
31) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna fi'om the TV if you leave the TV unattended or
unused for long periods of time.
32) During normal use, the TV may make _, _ ¢_
. * . _ o
occastonal snapping or popping __ <_>_
sounds. This is normal, especially d_t_.l¢_--_
when the unit is being turnedfrequentOnor _/_| _ ,]l _
off If these sounds become _(____L,b"
or continuous, unplug the power cord _,
and contact a Toshiba Authorized Service Center.
33) Possible Adverse Effects on TV Picture Tube: If a fixed
(non-moving) pattern remains on the TV screen for long
periods of time, the image can become permanently
engrained in the picture tube and cause subtle but
permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARP_.N'nf. Never leave your TV
on for long periods of time while it is displaying the
following formats or images:
• Fixed Images, such as PIP/POP windows, stock tickers,
video game patterns, TV station logo& and websites.
• Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Service
34) _ WARNING: RISKOF ELECTRIC _
/ II \ SHOCK.= Never attempt to service the LF_ "/)
_TV yourself Opening and __,_'_
removing the covers may expose II "_. II /'_]
you to dangerous voltage or other _
hazards• Refer all servicing to a __
Toshiba Authorized Service Center.
35) If you have the TV serviced:
• Ask the service technician to use only replacement par_s
specified by the manufacturer. _
• Upon completion of service, ask I__
the service technician to perform I_C __/,'5_,
• . _ :_
routine safety checks to determine _'_4_ _; n'_
that the TV is in safe operating 0,_LYA_/
• • _EPLACEMENT
condition. _ --_
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TW
Improper disposal may result in a picture tube implosion
and possible personal injury
Contents
Important safety information ............................. 2-4
Introduction ............................................................... 6
Exploring your new qW ................................................ 6
Selecting a location for your 1W .................................... 6
Connecting your TV ................................................. 7
Note regarding picture quality .................................. 7
Connecting a VCR ....................................................... 7
Connecting a cable converter box ................................. 7
Connecting a cable converter box and a VCR ............... 8
Connecting a satellite receiver and a VCR ..................... 8
Connecting a DVD player with ColorStream ®
(component video) and a VCR ..................................... 9
Connecting two VCRs .................................................... 9
Using the remote control .......................................10
Preparing the remote control for use ............................. 10
Installing the remote control batteries ........................... 10
Location of controls on TV and remote control ............ 11
Programming the remote control to operate a
cable converter box, satellite receiver, VCR,
DVD player, or HTIB (home theater in a box) ............. 12
Remote control codes ......................................... 12-13
Using the remote control to operate a
cable converter box, satellite receiver, VCR,
DVD player, or HTIB (home theater in a box) ............. 14
Setting up your TV ................................................... 15
Menu system (general instructions) ............................... 15
Changing the on-screen display language ...................... 16
Selecting the signal source ............................................. 16
Programming channels into the TV's memory .............. 16
Programming channels automatically ....................... 16
Adding and erasing channels manually ..................... 17
Changing channels ........................................................ 17
Using the TV's features ........................................... 18
Adjusting the channel settings ....................................... 18
Switching between two channels .............................. 18
Programming your favorite channels ........................ 18
Using the V-Chip Control (blocking) feature ................ 19
Selecting a PIN code ................................................ 19
Changing your PIN code ......................................... 20
If you forget your PIN code ................................. 20
Blocking programs by ratings ................................... 21
Ratings definitions (MPAA, Youth TV, _Y) ............. 21
Unblocking programs temporarily ........................... 22
Blocking unrated movies and programs .................... 23
Blocking channels .................................................... 24
Adjusting the picture .................................................... 25
Adjusting the picture quality .................................... 25
Selecting the color temperature ................................ 25
Selecting the picture preference ................................ 26
Displaying on-screen information ................................. 26
Setting the off timer ...................................................... 26
Auto power off .............................................................. 26
Using the closed caption feature .................................... 27
Adjusting the sound ...................................................... 28
Muting the sound .................................................... 28
Selecting stereo/SAP broadcasts ............................... 28
Adjusting the sound quality ..................................... 29
Using the surround sound feature ............................ 29
Viewing the demonstration (DEMO) mode ................. 30
Understanding the last mode memory feature ............... 30
Appendix .................................................................... 31
Specifications ................................................................ 31
_I}oubleshooting ............................................................ 32
Limited United States warranty ..................................... 33
Limited Canada warranty ............................................. 34
5
Introduction
• This owner's manual applies to models 32A33, 32A43, and 36A43, and there are slight differences among them.
• Model 32A43 is used in this manual for illustration purposes.
• instructions in this manual are based on using the remote control; however, you can use the buttons on the front panel
of the TV if they have the same name as those referred to on the remote control.
• Check the model number on the back of your TV before using this manual Write your model and serial numbers in
the space provided on the front cover of this manual for your records.
Exploring your new TV
• You can operate your TV using the buttons on the front panel or remote control.
• The back panel provides all the inputs you will need to connect other equipment to your TV. Models 32A43 and
36A43 have additional audio/video inputs on the front panel (referred to as "VIDEO-Y').
Frontof nl
32A33 32A43
36A43
VIDEO-3 IN VIDEO-3 IN
(standard A/V) (standard A/V}
Back of IV
?
voEo,v0Eo /
VIDEO-1 IN VIDEO-2 IN A/V OUT
(standardAN (standard A/V
plusoptional plus optional
SWideo*} Co]orStream*/
component video}
*lf you usean 5Video cable witha VIDEO 1connectionor a setof component
video cableswith a VIDE02 connection,you will need to disconnectthe
respectivestandard video cable or the pictureperformance will be unacceptable.
Selecting a location for your TV
• Place the TV either on the floor or on the TV stand listed in the "Specifications"
section.
• Place the TV in a location where light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventilation, inadequate
ventilation may cause overheating, which can dmnage the TV.
Before installing your TV, please read the important safety information on pages 2-4.
@@
@@®
®@
TOaHIEIA
Connecting your TV
Note: Cablesarenotsuppliedwdbyour TK
• Coaxialcableisthecablethatcomesinfromyourantenna,cableTVservice,orcable
converterbox.Coaxialcableuses"F"connectors.
• StandardstereoPJVcablesusuallycomein setsofthree,andaretypicallycolor-coded
accordingto use:yellowforvideo,redfor stereorightaudio,andwhitefor stereoleft(ormoon)
audio.YourTV'sstandardA/Vinputsarecolor-codedin thesamemannerasthe cables.
• S-Video cable isfor usewithvideoequipmentthat hasS-Videoconnectors.
• Componentvideocablescomein setsofthree (typicallycolor-cededgreen,blue,andred),
andarefor usewith videoequipmentthat hascomponentvideoconnectors.YourTV's
ColorStream_'(componentvideo)inputsarecolor*cededyellow,blue,andred.Plugthe
greencomponentvideocableintotheyellowVIDEO-2input (see"BackofTV"onpage6).
NOTEREGARDINGPICTUREQUALITY
WhenconnectingvideoequipmenttoyourToshibaTV:
• ForGOODpicturequality:Useastandardyellowvideocable.
• ForBE'O'ERpicturequality: IfyourequipmenthasSwideoconnectors,usean
S-videocableinsteadofa standardyellowvideocable.Youstillmustconnectthe
standardredandwhiteaudiocablesforfull systemconnection,but denotconnect
astandardyellowvideocableat thesametimeorthe pictureperformancewill be
unacceptable.
• ForBESTpicturequality:Ifyourequipmenthascomponentvideoconnectors,
usecomponentvideocablesinsteadofastandardyellowvideocableorS-video
cable.Youstillmustconnectthestandardredandwhiteaudiocablesforfull
systemconnection.
O u0
Coaxial(antenna)cable
.=EN=
StandardstereoANcables
(typicallycolor-codedyellowforvideo,
redandwhitelot audio)
S-videocable
Componentvideocables
(typicallycolor*codedred,green,blue)
CAUTION:Donot plugin anypower cords
untilyouhavefinishedconnectingall equipment.
Connecting a VCR
With this connection you can:
• watch local TV channels and videotapes
• record one channel while watching the same or
another channel
You will need:
• two coaxial cables
• one set of standard A/V cables (If your VCR has
S-video, you can use an S-video cable instead of the
standard video cable. See "Note Regarding Picture
Quality" above.)
Note:
ffyou have a mono VCR,connect L/Mono to VCRAudio OUT
using only one audio cable.
The VIDEO-2 inputs on the back of the IV can be used for
connecting a second piece of video equipment such as a DVD
playec The VIDEO-3 inputs* on the front of the 71/can be used
for connecting a third piece of video equipment such as a
camcordec See "Note Regarding Picture Quality" above.
*Mode132A33 does not have VIDEO3 inputs.
From cable or antenna I.
L _° i@l _ @1_°_
__1 ..... -j /
Connecting a cable converter box
With this connection you can:
• watch basic and premium cable channels
Tune the TV to channel 3 or 4 (whichever channel is
vacant in your area), and then use the cable converter box
to change channels.
You will need:
• two coaxial cables
Note:
Whenyou use a cable converter box withyour TV,you may not
be able to use the remote control to program certain features
(for example, blocking channels).
From cable I
Cable converter _"_ _--_; _ I _,,o _
box _L_° I_ ILVJl _1_1/
_°_11_'__ "_1 /
Theunauthorizedrecording,use,distribution,orrevisionof
televisionprograms,videotapes,DVBs,andothermaterials
isprohibitedundertheCopyrightLawsoftheUnitedStates
andothercountries,andmaysubjectyontociviland
criminalliability.
Connecting a cable converter box and a VCR
With this connection you can:
• watch videotapes
• watch and record basic and premium
cable channels From
• record one channel while 0[_ OUTCaNe _ |Cable
.... Stereo VCR (_ _l Converter
watcnmg tne same or anotner _ _ IVMN BOX
non-premiumchannel I ............ doo%n _ (_ I r ,--_
EN ENffer_ ANT OUT [oTV OUT Cable
Tune the VCR to channel ] @ _[_ _(O)_ E,_2_'__w ] _ -..
• , 3 OH3 ,_lgnal iN
3 or4 (whtchever channel ts vacant ] @ _ ou, cc::[_] _ 007 Splitter
in your area), place the TV in _ -- i
VIDEO 1mode, and then use the _ _€ ' TV i
converter box to change channels. | | _--------,N_OUT-_
You wdl need: t _ '_' 7 _ _ ((_'_
• • • I _ N _/ Mq_
one cable stgnal sphtter L _, _i _) _ ]'_ _.wr
• AUDrO AUDrO _ _UOrO _)
•fourcoaxtalcables
• one set of standard A/V cables (if your [_.5_o_ ]wEo_ _] /
VCR has S-video, you can use an S-video
cable instead of the standard video cable. See
"Note Regarding Picture Quality" on page 7.)
Note:
If you have a mona VCR, connect TV L/Mona Audio IN The unauthorized recording,use, distribution, orrevisionof
to VCR Audio OUT using only one audio cable, television programs,videotapes, DVDs, and other materials
When you use a cable converter box with your IV,, you is prohibited underthe Copyright Laws of the United States
may not be able to use the remote control to program and ether countries, and may subject yon to civil and
certain features (for example, blocking channels), criminal liability.
Connecting a satellite receiver and a VCR
With this connection you can:
• watch videotapes From Satellite dish
• watch satellite and TV channels Satellite Receiver
You will need: [
/
• three coaxial cables ] 0o_,_...... 0°%
• twosetsofstandardA/Vcables(ifyour | @ _(
satellite receiver has S-video, you can use al-_
S-video cable from the satellite receiver
instead of the standard video cable. See
"Note Regarding Picture Quality" on page 7.)
Note:
Towatchsatelliteprograms,the73/mustselect
VIDEO-1(see"Selectingthesignalsource"on
page 16).
_UT
Towatch VCRprograms, the 73/must select
VIDEO-2 (see "Selecting the signal source" on
page 16).
TV
INi
=OUT ANT
vEoco17_)
StereoVCR
s vl_o
)
Fromantenna
Connecting a DVD player with ColorStream ® (component video) and a VCR
Your TV has ColorStTeam* (component video) inputs. Connecting your TV to a DVD player with component video
(such as a Toshiba DVD player with ColorStream' ) can greatly enhance picture quality and performance.
With this connection you can:
• watch TV channels, DVDs, and videotapes
• record TV channels
• record one channel while watching the same or
another channel
You will need:
• two coaxial cables
EN_rom ANT OUT to TV
• one set of standard A/V cables from the VCR (If your
VCR has S-video, you can use an S-video cable instead
of the standard video cable. See "Note Regarding
Picture Quality" on page 7.)
• one set of component video cables from the DVD player
• one pair of standard audio cables from the DVD player
®
Note:
Towatch the VCR, the TVmust select VIDEO 1(see page 16).
Towatch the DVDplayer, the TVmust select VIDEO2 (see
"Selecting the signal source" on page 16).
The ColorStream inputs on the TVare for use with DVD players
with 480iinterlaced scanning only. If you have a 480p
progressive scan DVD player,you must switch the DVD
player to 480i interlaced mode first, and then connect it to
the TV'sColorStream inputs. Failure to do this will cause apoor
picture or no picture to display.
You can connect a high-definition set-top receiver only if the
output is switched to 480i interlaced mode first. This TV will
not accept or display 480p or 720p progressive scan
signals or 1080i interlaced high-dermition signals.
Connecting two VCRs
DVD player with component video
Theunauthorizedrecording,use,distribution,orrevisionof
televisionprograms,videotapes,DVDs,andothermaterials
isprohibitedundertheCopyrightLawsoftheUnitedStates
andothercountries,andmaysubjectyontociviland
criminalliability.
With this connection you can:
• watch TV channels and videotapes From a
• record TV channels VCR1
• record one TV channel while watching the same or ............ _uo,_
another channel @ _"
I
• record (dub/edit) from one VCR to the other VCR
while watching a videotape
You will need:
• two coaxial cables
• two sets of standard A/V cables (IfVCRI has
S-video, you can use an S-video cable between
VCRI and the TV instead of the standard video
cable. See "Note Regarding Picture Quality" on
page 73
®
Note:
Do not connect the same VCRto both the OUTand the IN
connections on the TVat the same time.
Torecord (dub/edit) from VCR 1to VCR2, the 73/must
select VIDEO 1(seepage 16),and VCR2 must select
LINE IN
VCR2
L
®O
ENfrom ANT OUT t0 TV
Using the remote control
Preparing the remote control for use
Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD players,
and HTIBs (home theater in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most Toshiba devices. See page 14.
If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed
to operate:
You can progrmn the TV remote control so it will operate the other device. See pages 12-14.
Installing the remote control batteries
1 Remove the battery cover from the back of the remote control.
Squeeze tab
and lift cover.
Caution:
Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
Do not mix battery types or combine used
batteries with new ones.
Remove dead batteries immediately to prevent
battery acid from leaking into the battery
compartment.
Ifyou do not intend to use the remote control
for a long time, remove the batteries.
2 install two AA size batteries, making sure to match the and-
signs on the batteries to the signs on the battery compartment.
Note:
Ifyour Toshiba 71/remote control does not
operate all the features of your other device,
use the original remote control for that device.
3 Reinsert the battery cover in the remote control until the tab snaps.
10
Location of controls on TV and remote control
For details on the use of each control, refer to pages in brackets.
TV front panel
Model 32A33
front panel
TV/VlDEO [16]
VOLUME < • [28]
J_ CHANNEL&V [16]
MENU [151 < •YA [15]
POWER [14]
Remote control
sensor
POWER indicator
TV/VIDEO [16]
I VOLUME </• [28]
Models32A43 and I CHANNEL A/V [16]
36A43 front pane _
pOWERMEF_U TV/VIDEO VOLUME CHANNEL
........o o 0000
@ @
VIDEO-3 IN
(inside door)
• ¥A [151
MENU [15]
_POWER [141
Remote control
sensor
POWER indicator
Remote control
TV/VIDEO [16] --
RECALL [26] --
SLEEP
MENU [15]
FAY ,A (favorite channels) [18]
Accesses channels programmed into
the Favorite Channel memory only
CHANNEL AV [16]
Accesses channels programmed into
Device Switch
Set to "TV" to control the T_
f
VCR or DVD functions [14] /
t
@
@
@@
-- POWER [14]
Channel numbers [17]
-- OH RTN (channel return) [18]
VOLUME AV [28]
-- MUTE [28]
11
Programming the remote control to operate a cable converter box,
satellite receiver, VCR, DVD player, or HTIB (home theater in a box)
Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote
control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps
below. For details on using the remote control to operate the device, see page 14.
1 in the remote control code table (below and on the next page), find
the code for your device. If more than one code is listed, try each one
P POWER separately until you find one that works.
2 Set the Device Switch to the type of device you are programming
the remote control to operate--CBL/SAT (for a cable converter box
or satellite receiver), VCR (for a VCR or TV/VCR combo), or DVD
(for a DVD player or HTIB [home theater in a box]).
Channel
_ Numbers 3 While holding down RECALL, press the Channel Number buttons
_Frnt
,z_t_'° _ (_ to enter the 3-digit code for your device.
4 To test the code, turn on the device, point the remote control at it, and
press POWER.
-if the correct code was entered, the device will turn off.
-if the device does not respond, repeat steps 1-4 using another code.
-if the device does not respond to another code, you will need to use
the remote control that came with the device.
5 Remember to set the Device Switch back to ]IV to control the TV.
6 For future reference, write down the code(s) you used:
DeviceSwitch DEVICE CODE DEVICE CODE
Note:
Every time you change the batteries, you will need to reprogram the remote
control
Some newer VCRsrespond to either of two codes. These VCRshave a
switch labeled "VCR1/VCR2." If your VCRhas this kind of switch and does
not respond to the codes foryour VCRbrand, set the switch to the other
position ("VCRI" or "VCR2') and reprogram the remote control
Remote control codes
In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code
that is not recognized by the TV remote control. If this happens, you will need to use the remote control provided with
the device.
Cableconverter box
ABC:061,062,063,082,
084,087,091,092,
096,098
Archer:065,092,097,099
Cableview:064,094
Century:092
Citizen:090,092,097
Contec:083,085,086,
088,093,098
Diamond:093
Eagle:091
GE:061,062
Gemini:069,070,094
GeneralInstruments:062,
089,096
Hamtin:093
Hitachi:062,095, 096
Jaseo:097
Jerrold:062,069,071,
082,086,089,091,
096
Magnavox:072,096
Memorex:091,092, 104
MultiCanal:090
Novavision:101
Panasonic:081,083, 085
Philco:087
Philips:066,067,06&
070,072,073, 074,
075,091,092
Pioneer:076,077
Proscan:061,062
RadioShack:092,097,
099
RCA:064,081
Realistic:065
Recoton:102
Sameung:077,090
ScientificAtlanta:063,
078,079,080,088,
098,101,105
Sears:095
Signature:062
Signature2000:096
Sprucer:081,085
Starcom:069,082,087,
096,103,104
Stargate:069,090
Sylvania:095,100
TeleView:090
Texscan:100
Tocom:071,084,085
U,S.Electronics:087,
096,098
UNtedCable:082
Universal: 065,092,097,
099, 102, 103
Wards: 096
Satellite receiver
Alphastar:038,059
Chaparral:034
DISHNetwork:057
Drake:020,040,044,046,
050,053
Echostar:018,041,051
ExpressVu:057
Fujitsu:027
GE:008,009,013
12
Remote control codes (cont.)
Satellite receiver
(cont.)
GeneralInstruments:010,
011,012,022,023,
031,049
Hitachi:033
Hughes:033
HughesNetworkSystems:
019
Intereat:048
Janeil:027
JVC:017,057
Kenwood:029
Magnavox:060
Optimue:058
Pansat:036,052
Primestar:015,042
Proscan:008,009,013
RadioShack:022,023,
030
RCA:008,009,013,016
Realistic:030
Samsung:059
Sony:014,055
StarChoice:057
StarTrak:025,026,037,
054
STS:024
Toshiba:000,001,002,
003,004,005,006,
007,020,031,056
Uniden:021,028,030,
032,035,039,043,
045,047, 058
Zenith:027
TV/VCR Combo
Action:078
GE:059,062
Goldstar:065
Panasonic:065
Precision:078
Quasar:065
Realistic:079
Sony:074
Toshiba:057
Zenith:065
DVD/VCR Combo
GoVideo:
DVD=087,VCR=081
JVC:
DVD=088,VCR=082
RCA:
DVD=089,VCR=083
Samsung:
DVD=090,VCR=084
Sanyo:
DVD=091,VCR=085
Zenith:
DVD=092,VCR=086
DVD player
Aiwa:006,015
Apex:016,017
ROSE:097
Rroksonic:018
Clarion:019
Classic:020
Daewoo:021
Denon:022,023,024,025
Emerson:026,027
Fisher:028
Funai:027
GE:001,029, 030
GoVideo:087
GPX:031
Hitachi:005,032,033,
034,035
JVC:003,007,036,042,
088
Kenwood:037
Konka:008,009
Magnavox:004,038
Memorex:039
Mintek:040
NAD:026
Nakamichi:041
Norcent:043
Onkyo:044
Oritron:058
Panasonic:010,045,046,
047,048,049,050
Philips:004,051
Pioneer:052,053,054,
055
Proscam001,056
Qwestar:057,058
RCA:001,002,059, 089
Sampo:060
Samsung:061,062, 086,
O9O
Sansui:073
Sanyo:063,091
Sharp:064,067
Sherwood:074
Sony:011,012,065,066,
068,069,070
Sylvania:027
Teac:071
Technics:072
Techwood:075
Toshiba:000,013,076,
077,078
Yamaha:079,080,081
Zenith:014,082,092
Portable DVD player
Aiwa:093
Audiovox:094,095
Panasonic:024,096,099
RCA:098
VCR
Admiral:049
Aiko:019
Aiwa:018
Akai:003,004,037,038,
039,058,069
Audiovox:010
Bell& Howell:007,068
Broksonic:008,017
Calix:010
Carver:026
CCE:019
Citizen:009,010,011,
012,013,014, 015,
019,057,073
Colortyme:005
Craig:009,010,016,061,
065,079
CurtisMathes:001,005,
009,012,014, 040,
048,053,056, 057
Daewoo:011,0!3, 015,
017,018,019,057,
078
Daytron:078
Denon:063
Dimensia:001,048
Electrohome:010,020,
065
Emerson:003,008, 010,
011,017,018, 020,
028,039,054,057,
062,065,068, 072
Fisher:007,016, 021,022,
023,057,064, 068,
070,071,079
Fuji:004,041
Funai:018,073
Garrard:018
GE:001,002,009,040,
042,048,056
GoVideo:056,059, 061,
081
Goldstar:005,010,014,
054,056,065, 067
Gradiente:018,065
HarmanKardom005
Hitachi:024,025,035,
037,042,063, 070,
O80
JRL:076
JCPenney:005,006,007,
008,009,010,028,
024,025,026, 035,
056,061,063, 065
Jensem024,025,037,
050
JVC:005,006, 007,014,
037,043,050, 062,
063,068,082
Kenwood:005,006,007,
012,014,037, 043,
050,053,068, 071
Kodak:010
LG:010
Uoyds:053,073,079
Logik:061
LXh010
Magnasonic:061,065,
078
Magnavox:026,027,034,
044,057,061,072
Maran_:005,006, 007,
012,014,026,053,
O67
Memorex:007,009,010,
016,018,034,049,
063,065,066,068,
075,079
MGA:020,028,039
MGN:056
Minolta:024,025, 035,
063
Mitsubishi:020,024,025,
028,039,043,065
MontgomeryWard:049
Motorola:049
MTC:009,046,061
Multitech:009,012,0!8
NEC:005,006,007,012,
014,037,043,053,
054,067, 070
Nikko:010
Noblex:009
Optimue:010,049, 065
Optonica:031
Orion:054,057,062,065,
068,072
Panasonic:036,045,046,
057,061,072,079
Pentax:012,024,025,
035,042,053,063
PentexResearch:014
Philco:026,027, 063
Philips:026,031,044,057
Pioneer:006,024,043,
055
Portland:012,013, 015
Proscan:O01,002,048
Proton:061
Quasar:045
RadioShack:010,031,
065
RadioShack/Realistic:
007,009,010,016,
018,020,021,022,
031,049
Radix:0!0
RCA:001,002, 003,009,
024,025,029,035,
040,042,045,048,
055,056,063,071,
O83
Realistic:007,009,010,
011,016,018,020,
021,022,031,049,
051,056, 060,065,
075,079
Ricoh:047
Runco:034
Samsung:OOg,011,03R,
056,073,084
Sansui:006,037,043,061
Sanyo:O07,009,016,054,
064,068,071,075,
079,085
Sco_:008,011,017,028,
030,057,065,072
Sears:O07,010,016,021,
022,023,024,025,
035,053,057,063,
064,065,068,071,
075,079
Sharp:013,020,031,049,
051,060,066
Shintom:004,025,032,
061
Signature:049
Signature2000:075
Singer:047,061
Sony:004,032,083,041,
052,058,070,074,
076,077,080
STS:035
Sylvania:018,026,027,
028,044,072
Symphonic:018,050,051,
053,073,079
Tandy:007
Tashiko:010
Tatong:037
Teac:018,029, 037
Technics:036
Teknika:010,018,065
Toshiba:057,011,021,
023,024,028,030,
039,074,078,079,
000
Totevision:009,010,065
Unitec:073
Unitech:009
VectorReseamh:005,006,
011,012,053
VideoConcepts:005,006,
011,012,039, 053
Wards:009,010,011,
016,018,020,024,
025,081,035,049,
051,056,057,060,
065,066,079
WhiteWestinghouse:073
XR-IO00:018
Yamaha:005,006,007,
014,037,053
Zenith:004,032,034,
041,047,069,086
HTIB
Lasonic:083
Panasonic:084
Venturer:085
13
Using the remote control to operate a cable converter box,
satellite receiver, VCR, DVD player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that lhe remote control is not preprogrammed to operate, you must
first progrmn the remote control to recognize the device (if you have not already done so). See pages 12 and 13.
To use your TV remote control to operate a:
• cable converter box or satellite receiver, set the Device Switch to CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Note:
• Even after the IV remote control isprogrammed, it
may not operate certain features onyour other
device. If this happens and you wish to use those
features, you will need to use the device's original
remote control Pointthe remote control
directlyat the device.
• Thisillustrationdescribestypicalexternaldevice
functions Cnol7Vfunctions). Thebuttons on thisremote
centre/may or may not work asdescribedforyour
specificdevice.
+10 / 100
Accesses DVD chapters higher than 10,
or VCR channels higher than I00.
TOP MENU (SLEEP)
Accesses a DVD's top menu.
DVD MENU
Accesses a DVD's menu system.
ENTER
DVD ENTER function.
Device Switch
Set to lV to control the TV; CBL/SAT to control a cable
converter box or satellite receiver; VCR to control a VCR;
DVD to control a DVD player or HTIB.
TV/VCR
To view one program while recording
another, press to select TV mode.
REW
Rewinds the tape or DVD. (Press during playback
to view the picture moving rapidly backward.)
REC
Starts recording.
FF
Fast-forwards the tape or DVD. (Press during playback
to view the picture moving rapidly forward.)
-- RECALL
DVD DISPLAY function.
POWER
Turns the selected device on and oft:
Channel Numbers
Press to directly access channels
(as opposed to CH AT).
ENT
Required by some VCRs and cable
converter boxes to change the channel.
AV< I_
Navigate DVD menus.
;LEAR
DVD CLEAP, function.
• selects the next higher channel;
• selects the next lower channel.
Press during playback or recording to
pause the picture; press again to restart.
Begins playback of a tape or DVD.
Stops the tape or DVD.
Skips forward to beginning of next
DVD chapter.
I'<<
Skips back to beginning of current DVD
chapter or previous chapters.
14
Setting up your TV
Menu system (general instructions)
After installing the batteries and programming the remote control, you
will need to set some preferences on your TV using the menu system.
You can access the menus using the buttons on the TV front panel or
remote control. Following are general instructions for using the menu
system:
1. Press MENU and then • or • to select a menu (Picture, Audio, Setup,
Preference, or Closed Caption, as shown in the menu system
overview, below).
2. Press • or • to select the function you want to adjust in the menu.
3. Press • or • to adjust the selected function.
Note: The• • buttonsfunctionasFAV• • (favoritechanneObuttonswhenno
menu is on-screen.
4. When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
Note: TheTVfrontpaneldoesnothaveanEXITbutton.
5. On-screen menus close automatically if no adjustments are made
within 15 seconds. To close an on-screen menu instantly, press EXIT
on the remote control.
Menu system overview
PICTURE menu
CO NtRA_T 50 AUDIO menu
8RIG_rr_ESS 5o
colo. <: ) '_
_I_SET AUDIo
MOW[vAI _TS_ [sTe! SAPMONO SET UP menu (1)
I B_._ 5O
1
SUIIROtlN_** [ON]
SETUP /
.ow_..l _o_=_A.GUAG_, / SETUPmenu(2)
[£NGLISlt] I ..............
ADD/ERAS[_ \
V.¢ItIP CO_IYIIO I.
T MOntE
SETUP
AMORE
TIHE_
FAVO_rCE CH
MOVE[vA]
PREFERENCE menu
TV Front Panel
_ENO TVNIDEO VOLUME C_ANNEL pC_¢_E_
o o 0000
i
MENU • • ••
o
-- RECALL
®®®
®®®
®®®
- EXIT
TOqHIBA
PREFEREN(:E
coto._._.Avu._ CLOSED CAPTION menu
rLO$;ED C.IPTION
_IOV[[_] S_LE _C= 121 C2 C3 124 ¥]
MOVE[v_ 1 $El._r [< I*!
15
Changing the on-screen display language
You can choose from three different languages (English, French, or
Spanish) for the on-screen display of menus and messages.
To select an on-screen display language:
1. Press MENU.
2. Press • or • until the SET UP menu appears.
3. Press • or • to highlight LANGUAGE.
4. Press • or • to highlight your desired language.
_J
SET UP
i_j_arl_gfa_l_aam
liJ
_V/CA_LE TV] £AIILE
It_ll/ tS_S [Ar;ll / fttAS
V _ll_p CO_t_QL
MOVl; [YA_ S_LECT [ 4 I+_
CONHGURA_ON
rv/caL_ [ rv] CAEI
_,RD tAMalE CAN
A OU I_F {Aa0=I ] FFF
BOUGER [vl ! _HOISlR [ _l }!
Selecting the signal source
You can use the TV/VIDEO button on tile remote control orTV to select
the signal source connected to your TV.
To change the signal source:
Repeatedly press TV/VlDEO to select either TV, VIDEO 1,
VIDEO 2, or VIDEO 3 (32A43 and 36A43 only). The selected signal
source is highlighted on-screen.
TV
VIDEO 1
VIDEO 2
TO S_L£_T pUSH TV/VID_O
32A33
To verify the signal source:
Press RECALL.
13/
VIDEO 1
VIDEO 2
VIDEO 3
TO S_L£_ PUSH W/VIO_O
32A43 and 36A43
TV Front Panel
TVNIDEO CHANNEL IJT
I
o o 0000
I
MENU _ • _i
@
@
@
@ @
C_R_
@@
RECALL
TV/VIDEO
Channel
Numbers
"HANNEL AY
Programming channels into the TV's memory
When you press CHANNEL iv on the TV or remote control,
the TV stops only on the channels stored in the TV's memory.
Note: TotunetheTVtoa channelnotprogrammed#_tothememo_ usethe
CHANNELNUMBERSontheremotecontrol
Follow the steps below and on the next page to program channels into
the TV's memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area
and store them in the TV's memory. After the channels are stored
automatically, you can manually add or erase individual channels
(see page 17).
To program channels automatically:
1. Press MENU.
2. Press • or • to highlight the SET UP menu.
16
3. Press • or • to highlight TV/CABLE.
4. Press • or • to highlight TV (if you use an antenna) or CABLE
(if you use cable).
5. Press • to highlight CH PROGRAM.
@%1!!' • _,' _'i_ii
SET UP
_A_GdAGf_
IWnW_t_ rn
v_ _ cokc r_oL
SET Up
kA_UA_t:
[E_ *q al_ cazg ESPINO
V/C_g Ca_3k
aO_/Eg_k_ {arab/ _RaS
_' C ggg_N ROL
ROVE [_ ! SliL_O_ [ 4 _.!
6. Press • or • to start automatic channel programming
("CH PROGRAM" displays on-screen). The TV automatically
cycles through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV's memory.
7. When automatic channel programming is complete, the message
"CH Programming Completed" appears.
8. Press CHANNEL _' to view the programmed channels.
Adding and erasing channels manually
After you have automatically programmed the channels into the TV's
memory, you can manually add and erase individual channels.
To add or erase a channel in the TV's memory:
1. Tune theTV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press • or • to highlight the SET UP menu.
4. Press • or • to highlight ADD/ERASE.
• C<
$;kT UP
TVICAE}I _ TV[ _AF_
5. Press • or • to highlight ADD or ERASE, whichever function you
want to perform.
6. Press MENU.
7. Repeat steps 1-6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
@
@ @
@ @
@@@
Channel
Numbers
-- MENU
-- EXIT
Channel AY
Changing channels
To change to the next programmed channel:
Press CHANNEL •v.
To change to a specific channel (programmed or unprogrammed)."
Press the CHANNEL NUMBERS (0-9 and 100).
Note: Forehannels100andhigher,pressthe 100button,andthenthenext
twochanndnumbers_forexample,toselectchannel100,press100 0 O,
toselectchanne1125,press100 2 5).
17
Using the TV's features
Adjusting the channel settings
Switching between two channels
To switch between two channels without entering a channel number:
1. Select tile first channel you want to view.
2. Select a second channel using the CHANNEL NUMBERS
(0-9 and 100).
3. Press CH RTN (channel return). The previous channel will display.
Every time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned theTV to.
Programming your favorite channels
The Favorite Channel feature allows you to use the FAV v• buttons on
the remote control to cycle through your favorite channels, skipping over
channels you do not normally watch. You can program a maximum of
12 favorite channels.
Note: Youcanstill useCHANNEL A!€ to cycle throughall the channelsyou
programmed into the TV'smemory onpage 7
To program your favorite channels:
1. Tune theTV to a channel you want to program as a favorite
channel.
2. Press MENU.
3. Press < or • to highlight the SET UP menu.
4. Press • or • to highlight FAVORITE CH.
S_ UP
_t_Og
o _0 S_r¢ gTOP I
I=r_ViJl_l
®
® ®
_.10
@@
Channel
Numbers
CH RTN
MENU
•EXIT
AV
MOVE [w_} 5TART [4 t*}
5. Press < or • to display the FAVORITE CH menu.
6. Press < or • to highlight SET.
7. Press • to add the current channel to the list.
8. Press EXIT.
@ ;,
9. Repeat steps 1-8 for up to 12 channels.
(Continued on next?age)
18
To select your favorite channels:
Press FAV v• on the remote control to cycle through the favorite
channels you programmed.
To dear a favorite channel:
1. Tune theTV to tile channel you want to clear from your favorite
channel list.
2. Press MENU.
3. Press • or • ro highlight the SET UP menu.
4. Press • or • to highlight FAVORITE CH.
5. Press • or • to display tile FAVORITE CH menu.
6. Press • or • to highlight CLEAR.
7. Press • to clear the current channel number from the list.
8. Press EXIT.
9. Repeat steps 1-8 for other channels you want to clear from your
favorite channel list.
Using the V-Chip Control {[blocking} feature
You can use the V-Chip Control feature to block certain programs or
channels, to prevent others from viewing them.
Selecting a PIN code
Before you can block programs or channels, you must select a personal
identification number (PIN) code. Your PIN code allows you to access
the V-Chip Control menu, and prevents others from changing the rating
and blocking limits you set.
To select your PIN code and access the V-Chip Control menu:
1. Press MENU.
2. Press • or • ro highlight the SET UP menu.
3. Press • or • to highlight V-CHIP CONTROL.
4. Press • or • to display the NEW PIN CODE entering screen.
SET UP
[Er*GL_S_ _I_*P*CJ_ EgVA_g,L
rVlCm_ [TV!CAE;_
SETUP
BLO(_KING IS RESET
PLEASE _NTER NEW PIN (.ODE
SELECT [O_91 END [EXIT]
Note:
• TheFAV VA buttons function asmenu < _"
buttons when amenu is on-screen
• TheFAV YA buttons will not work asfavorite
channel buttons unlessyou program at least
onefavorite channel
FAV VA--
MUll_
0
-- MENU
• EXIT
iiiiii!!i!iiii!iiiiii!!i!iii!iiiii!iii!ii!iiiii!!iiii!ii!iii!iiii!ii!i!
ii!iii!i!ilili!i!iiii!iii!iliiiiiiiii!iiiiiiiiiiiii!iiiiiii!!ii!i
(Continued on next 2age)
19
5. Use the CHANNEL NUMBERS (0-9) to enter your four-digit
PIN code. After the code is entered, the V-Chip Control menu
appears.
SET UP
str [_ATI
_OVE [_A] SEtEUg[ 4 I*]
V-Chip Control (Blocking) Menu
6. Press • or • to highlight ENABLE BLOCKING.
7. Press • or • to highlight "Y," which enables all blocking by activat-
ing tile V-Chip. See "Blocking programs by ratings" on page 21,
"Blocking unrated movies and programs" on page 23.
Note: The"Blockingchannels"feature(page24) is notaffectedby the
ENABLEBLOCKINGsetting.
To disable blocking:
Highlight "N" in step 7, above, to deactivate the V-Chip Control
feature and disable blocking.
RECALL
@
@ } Channel
@ @ Numbers
_ i MENU
,&V< _"
-- EXIT
o00
Changing your PIN code
1. Press MENU.
2. Press • or • to highlight the SET UP menu.
3. Press • or • to highlight V-CHIP CONTROL.
4. Press • or • to display tile PIN code entering screen.
5. Use tile Channel Number buttons (0-9) to enter your existing PIN
code. After tile code is entered, the V-Chip Control menu appears.
6. Press • or • to highlight NEW PIN CODE.
7. Press • or • to display tile New PIN Code entering screen.
SET UP
NJ_B LO£_ G [w/
S [_ O_KIN_ OFWIOgg
g_ _Cg _NCNN _ g
:[42_ {_1) .......
CC
,_' < >
_ET UP
pL EArl[ ENI_ER NEW pIN CODE
SELECT [O_9] END [EXIT]
8. Use the CHANNEL NUMBERS (0-9) to enter a new PIN code.
After the new code is entered, the V-Chip Control menu appears.
9. Press EXIT to return to normal TV viewing.
If you forget your PIN code
1. Press MENU.
2. Press • or 1_to highlight the SET
UP menu.
.
4.
5.
Press • or • to highlight V-CHIP
CONTROL.
Press • or I_to display the PIN
code entering screen.
While the PIN code entering
screen is displayed, press RECALL
four times within five seconds. The
"Blocking Is Reset" screen appears.
SEF Up
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
SELEC[ [0_9[ END [[XIT]
6. Use the CHANNEL NUMBERS
(0-9) to enter a new PIN code.
After tile new code is entered, the
V-Chip Control menu appears.
7. Press EXIT to return to normalTV
viewing.
2O
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
