Zurn PEX QPPM9H15C is a preassembled potable water distribution manifold designed to be used with Zurn PEX tubing and fittings. It is made of polysulfone plastic and has 9 hot and 15 cold outlets. The manifold can be installed in an accessible area near the water heater and should be protected from freezing temperatures. The distribution lines must connect to the manifold in a straight line, perpendicular to the manifold. The main supply lines for the manifold must connect in a straight line parallel to the manifold.
Zurn PEX QPPM9H15C is a preassembled potable water distribution manifold designed to be used with Zurn PEX tubing and fittings. It is made of polysulfone plastic and has 9 hot and 15 cold outlets. The manifold can be installed in an accessible area near the water heater and should be protected from freezing temperatures. The distribution lines must connect to the manifold in a straight line, perpendicular to the manifold. The main supply lines for the manifold must connect in a straight line parallel to the manifold.
Zurn PEX QPPM9H15C is a preassembled potable water distribution manifold designed to be used with Zurn PEX tubing and fittings. It is made of polysulfone plastic and has 9 hot and 15 cold outlets. The manifold can be installed in an accessible area near the water heater and should be protected from freezing temperatures. The distribution lines must connect to the manifold in a straight line, perpendicular to the manifold. The main supply lines for the manifold must connect in a straight line parallel to the manifold.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI