Tappan Q6SD-X User guide

Type
User guide
A consumer’s guide to the
2010 refrigerant changeover.
When shopping for a new air conditioning
system or heat pump, refrigerant may not be
on your list of priorities. But since a new cooling
system could last as long as 15 years, the
decision you make today will impact the ability
to service your equipment in the future. Here’s
what you need to know about refrigerant
types and phase-out guidelines to make an
educated purchase.
R-22. The traditional refrigerant.
For more than four decades, R-22 has
been the air conditioning and heat pump
refrigerant of choice. Unfortunately, R-22 is
a hydrochlorofluorocarbon, or HCFC, and
depletes the Earth’s protective ozone layer and
contributes to global warming. Because of its
damaging effects, the Environmental Protection
Agency (EPA) is phasing out usage of R-22
along with other HCFCs in accordance with the
Montreal Protocol.
If your equipment currently contains R-22, you
will still be able to have it serviced. However,
as availability of R-22 declines, the cost to
service your equipment may rise. What’s most
important is overall proper maintenance to
reduce the environmental impact of your
R-22 refrigerant.
Before purchasing your next cooling system,
take the time to learn about its refrigerant.
Refrigerant: What you need to know.
The R-22 phase-out timeline.
January 1, 2010
Equipment manufacturers will no longer
produce new units charged with R-22. Many
already offer a complete range of products
featuring earth-friendly R-410A refrigerant.
While some R-22 products will be in production
until December 31, 2009, most manufacturers
have already stopped making R-22 units in their
more efficient models.
R-22 will only be available to service older
cooling systems.
January 1, 2020
Chemical manufacturers will no longer be able
to produce R-22. Use of existing R-22
refrigerant, including refrigerant that has been
recovered and recycled, will be allowed beyond
2020 to service existing systems.
R-410A. The new standard.
Equipment manufacturers are replacing R-22 with
non-ozone-depleting R-410A refrigerant. Choosing
a cooling system that uses this alternative refrigerant
ensures you will not have servicing or charging
issues in the future. It’s important to factor in
the refrigerant along with the reliability, price and
warranty when selecting a new system.
More refrigerant questions?
Ask your heating and cooling
professional about the changeover
to ozone-friendly R-410A.
Sign of the times.
ecoLogic
®
is your sign of environmentally friendly, high-
efficiency heating and cooling products. Only the most
energy-efficient, most environmentally responsible units
receive the ecoLogic seal of quality – including cooling
systems that contain R-410A refrigerant.
© Nortek Global HVAC, LLC 2018. All rights reserved.
Printed in U.S.A. 945C-0418
  • Page 1 1
  • Page 2 2

Tappan Q6SD-X User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI