Operating Instructions
1. Remove the isolation tab in the battery compartment on the transmitter.
2. Plug the receiver to a standard outlet, Make sure the outlet supplying
receiver is powered. Plug your device into the socket on the receiver.
3. To control the connected device, press the ON/OFF on the
Notes: The receiver must be located within 100 feet of the remote
Actual functional range may be by the factors: weather,
radio frequency, low remote battery and obstructions between the transmitter
and receiver.
Replacement
If you find the receiver works abnormally or the indicator on the remote
control becomes dim, please replace the battery.
-Open the battery compartment and remove the old battery.
-Install a new CR2032 battery, making sure the polarity + 1- of the battery
is correct.
-Close the battery
Caution: Failure to properly align the battery polarity can cause personal
injury and/or property damage.
Warning
-Keep battery away from children and pets.
-Follow the battery manufacturer's safety and usage instructions.
Remove a spent or discharged battery from the product.
-Remove the battery when not using the product for an extended period.
-Do not expose battery to fire or other heat sources.
-Do not dispose of battery in trash. Recycle or manage it as hazardous waste.
Do not ingest the Chemical Bum Hazard (The remote control supplied
with) This product contains a coin/button cell battery. If the coin/button cell
battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death. Keep new and used batteries away from children. If the
battery compartment does not close securely, stop using the product and
keep it away from children. If you think batteries might have been swallowed
or placed inside any part of the body, seek immediate medical attention.
