SKC 232-01 User manual

Type
User manual

This manual is also suitable for

SKC 232-01 is a personal sampling pump that can be used to collect air samples for a variety of applications, including industrial hygiene, environmental monitoring, and indoor air quality testing. It is a small, lightweight pump that is easy to carry and operate. The pump can be used to collect samples at flow rates from 10 to 500 mL/min and can run for up to 8 hours on a single battery charge. The pump is also equipped with a built-in flow meter that allows the user to monitor the flow rate during sampling.

SKC 232-01 is a personal sampling pump that can be used to collect air samples for a variety of applications, including industrial hygiene, environmental monitoring, and indoor air quality testing. It is a small, lightweight pump that is easy to carry and operate. The pump can be used to collect samples at flow rates from 10 to 500 mL/min and can run for up to 8 hours on a single battery charge. The pump is also equipped with a built-in flow meter that allows the user to monitor the flow rate during sampling.

Page 1 of 2 Form 85177 Rev 2209
Please check one:
Quotation ______ Order ______
Custom Quotation/Order for
Sample Bags
Please complete appropriate numbered sections on both pages of this specication form and send to your SKC representative:
SKC Inc. SKC South SKC-West SKC Limited SKC South Africa SKC Asia
Tel: 800-752-8472 Tel: 800-752-7684 Tel: 800-752-9378 Tel: (01258) 480188 Tel: 11 913 2666 Tel: (65) 6271 0291
Type of Order: (Please check one)
New quote for custom sample bags
Repeat custom request
(Previous SKC Custom Quote/Order # ________ )
Drawing
Please indicate dimensions in inches and positions of
tting(s) and eyelet(s) on the drawing to the left.
Hover over elds for tool tips/positioning information.
Approximate Liter Size
Select approximate liter size if known from the drop down.
Bag Material and Inside Width (select one):
Select internal width and bag material from the dropdown
Inside Seam Length
(Please note the bag will have a 2 inch variance outside
the seams)
Type in the desired internal length of the bag
Eyelet(s)
Select eyelet locations, if needed, on the drawing.
Additional Notes:
Seam
Width
Length
Margin
OPEN
(2 Turns MAX)
CLOSE
(until snug)
Quality Sample Bag
Sample Record
www.skcinc.com
Cat. No.:
Capacity:
Batch:
1 Liter
*Select Internal Dimension*
0.0
2.0
Single Polypropylene Single Push/Pull Stainless Breath Fitting Single Septa
Only Stainless
Dual Stainless Single Stainless with
Septa and On/Off
Fittings Style
(SKC hose ttings are 3/16-inch OD)
Select ttings on the drop down and select desired
tting location on the drawing, hover over to see
location dimensions from internal seal edge
Fitting Legend:
Labels
Quantity
10. Purchasing Terms and Authorization
Note: Price quotes are typically provided within 5 to 7 business days.
Terms: Purchase orders for custom sample bags must be accompanied by this form. Purchase orders may not be
changed or cancelled after they are received by SKC Inc. Custom order sample bags are not returnable. See the
SKC Limited Warranty and Return Policy at http://www.skcinc.com/warranty.
SKC reserves the right to cancel this order if it is determined that SKC cannot produce a quality custom bag according to
the specications provided.
Authorization: The signature of the undersigned conrms that the specications supplied on form 85177, Revision 2209
are correct and agrees to the custom order terms.
Name (please print or type) ________________________________________________________________________
Signature __________________________________________________ Date _____________________________
Company Name _________________________________________________________________________________
Contact Telephone Number ______________________________ Email __________________________________
Page 2 of 2 Form 85177 Rev 2209
Dual Stainless
Label, Yes
  • Page 1 1
  • Page 2 2

SKC 232-01 User manual

Type
User manual
This manual is also suitable for

SKC 232-01 is a personal sampling pump that can be used to collect air samples for a variety of applications, including industrial hygiene, environmental monitoring, and indoor air quality testing. It is a small, lightweight pump that is easy to carry and operate. The pump can be used to collect samples at flow rates from 10 to 500 mL/min and can run for up to 8 hours on a single battery charge. The pump is also equipped with a built-in flow meter that allows the user to monitor the flow rate during sampling.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI