Kohler K-20202-RA User manual

Brand: Kohler

Model: K-20202-RA

Type: User manual

Kohler K-20202-RA is a 60" x 32" alcove bath designed for comfort and ease of use. Its 19" step-over height allows for easy entry and exit, while the integral lumbar support provides a relaxing bathing experience. The slotted overflow allows for deep soaking, and the integral apron creates a clean, finished look. The textured bottom surface prevents slipping, and the integral flange helps prevent water from seeping behind the wall.

Underscore® Rectangle

60" x 32" alcove bath

K-20202-RA

Features

•Convenient 19" step-over height retains the same depth as a

standard 21" bath.

•Integral lumbar support.

•Slotted overflow allows for deep soaking.

•Integral apron creates a clean, finished look.

•Integral flange helps prevent water from seeping behind wall

and simplifies alcove installation.

•Textured bottom surface.

Material

•Acrylic.

Installation

•Right drain.

•Requires K-7271 or K-7272 Clearflo slotted overflow bath

drain (sold separately).

•Alcove.

Required Products/Accessories

K-7271 Brass Slotted Overflow Bath Drain

K-7272 PVC Slotted Overflow Bath Drain

Recommended Products/Accessories

K-23726 Drain treatment

K-23732 Tub & shower cleaner

Codes/Standards

CSA B45.5/IAPMO Z124

ASTM E162

ASTM E662

ADA

ICC/ANSI A117.1

KOHLER® Plastic Baths and

Receptors Lifetime Limited Warranty

See website for detailed warranty information.

Available Colors/Finishes

Color tiles intended for reference only.

Color Code Description

0 White

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

5-29-2021 16:36 - US/CA

Underscore® Rectangle

60" x 32" alcove bath

K-20202-RA

Integral Flange

Detail

No change in measurements if connected

with drain illustrated. (K-7272)

1-1/2"

Bath Drain

1/4" (6 mm) R.

1-1/4"

(32 mm)

20-1/4"

(514 mm)

32" (813 mm)

19"

(483 mm)

60" (1524 mm)

16"

(406 mm)

(25 mm)

2-5/8"

(67 mm)

(229 mm)

2-1/8"

(54 mm)

2-1/8"

(54 mm)

Lumbar

Angle 15°

Technical Information

All product dimensions are nominal.

Installation: Three-wall alcove

Drain location: Right

Basin area, bottom: 46-1/4" x 22" (1175 mm x 559 mm)

Basin area, top: 52" x 24" (1321 mm x 610 mm)

Weight: 100 lbs (45.4 kg)

Minimum floor load: 56 lbs/ft² (273.4 kg/m²)

Water depth: 15-1/2" (394 mm)

Water capacity: 68 gal (257.4 L)

Minimum flat for

door:

2-3/4" (70 mm)

Notes

Measure your actual product for rough-in

details.

Install this product according to the installation

instructions.

The hot water supply should be 70% of the

capacity of the bath or greater. Installations will

vary.

ADA compliant when installed to the specific

requirements of these regulations.

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

5-29-2021 16:36 - US/CA

Kohler K-20202-RA User manual

Kohler K-20202-RA User manual

Kohler K-20202-RA User manual

Related papers