ASSEMBLY INSTRUCTION MODEL #4457-GA-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING:
Electrical Danger Turn Power Off
R
CUL
19"
11.5"
You will need 5-Candelabra Base Bulb
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE
How to Install
Crystal Sets
UL
I
H
G
F
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
B. 8Sets. (2)14mm + AS20-2.5"
C. 8Sets. AS20-2"(No Jewel)
D. 8Sets. (1)14mm + AS20-2"
A. 16Sets. (1)14mm + AS20-2.5"
E. 8Sets. (2)14mm + AS9-2"
J. 1Piece. (1)14mm + AS8-40mm Ball
I. 8Sets. (9)14mm + AS9-2"
A
B
A
C
D
E
J
H. 8Sets.
G. 8Sets.
(8)14mm + AS9-2"
(5)14mm + (1)14mm 3 holes + AS9-2"
F. 8Sets. (4)14mm + AS9-2"
ABB C D E
J
I
H
G
F
DETAILED ILLUSTRATION
I
H
G
F
The fixture is dry rated
1. Do a complete inventory of all parts and components
before you start installing.
3. Attach the mounting plate onto the outlet box using two
outlet screws.
4. Install the fixture onto the mounting plate using the two ball nuts.
5. Install bulbs (not included) and proceed to connecting the
power.
6. When you begin to dress the fixture, start with packet labeled(A).
7. IMPORTANT: Apply crystal sets in alphabetical order.
2. Place the glass dish and small metal dish over the bottom
metal cover and secure with the finial.
