INSTRUCTIONS
GARMENT STEAMER
IRONMIST
PACKAGE CONTENTS
• IronMist steamer
• 4 × attachment
• Travel bag
• Measuring cup
• Instructions
TECHNICAL SPECIFICATIONS
• Size: 15 × 18 cm
• Rated voltage: 220–240 V DC ~ 50/60 Hz
• Rated power: 1500 W
• Steam temperature: 98 °C
• Material: ABS
COMPONENTS
1. Measuring cup
2. Indicator light
3. Steam button
4. Water container
5. Steel plate attachment
6. Long brush attachment
7. Line attachment
8. Dust brush attachment
USAGE
• The IronMist steamer is used to straighten
creases and wrinkles in your garments.
• Before you use it, hang your clothes from a
line or hanger.
• Detach the water container from the handle
(pull down and remove) and open the black
cap on the container.
• Pour distilled or purified water into the
container using the included measuring cup.
Do not use regular tap water to avoid scale
buildup.
• Reattach the water container, choose your
preferred attachment (make sure to take off
the plastic film off the steel plate
attachment before use), then plug the
power cord into an electrical power socket.
• The red light on the device indicates that it’s
turned on.
• Wait for 1–2 minutes for the device to get
hot.
• Pull on your clothes slightly to straighten
them and then go over them with the
steamer. Press the steam button to release
the steam.
• When you’re done, remove the water
container and drain any leftover water
inside. Press on the steam button a few
times to release all the steam from the
device to prevent scale buildup.
WARNINGS
• Do not shoot steam at other people or
animals. This can cause severe burns.
• Never use the device on clothes that you’re
wearing.
• Do not remove any parts during use.
• Store out of children’s reach.
• Only use distilled or purified water.