JUNG Smart User guide

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

Yet another system for building automation? A reasonable question. There are, after all, mature solutions

available. Generally, though, they are not frequently in use. Sometimes the technology is too complex, the

planning too extensive, to push smart projects into the daily life of electricians and specialist firms. 90

percent of the installations are still installed conventionally.

As a result, JUNG is taking a new approach to the topic of digitalisation in buildings – with a system that is

systematically tailored to the needs of the trades. JUNG HOME is based on technology that is well-known

and understood. Planning, cabling and mounting is the same as a conventional electrical installation, without

devices in the distribution box or special wiring.

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 1 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

With this, virtually every home - whether old or new - already fulfills the requirements for a digital

infrastructure. Professional trades can offer solutions without a great effort that save energy and heating

costs, increase comfort and contribute to climate protection. JUNG HOME makes it easy to meet the

increasing customer requests and demands of the building technology.

The advantages of the system – JUNG HOME is …

From the socket with energy measurement function to the room thermostat – in the JUNG HOME, all

components communicate wirelessly with each other. The secure, worldwide wireless standard

Bluetooth® SIG Mesh makes it possible.

In the JUNG HOME, there are no bus lines. To simplify the installation, the devices exchange information

wirelessly. The Bluetooth® Mesh SIG wireless standard is used for this, which is an extension of the

Bluetooth® protocol proven millions of times. As the only Bluetooth® version in building technology, it has

been standardised by the official Bluetooth SIG, Inc. (Special Interest Group) – a prerequisite for smooth,

manufacturer-independent operation.

The mesh principle provides blanket wireless coverage: devices such as push-buttons and sockets

connected to the mains network serve as both transmitters and receivers. They amplify incoming signals and

send on commands. Because their radio waves interlock like the threads of a fabric (hence "mesh"), the

stability of the network increases with every new node. And commands jump from one device to the next one

until they reach their goal, even when this is at the other end of the building.

Thanks to automatic encryption and maintenance-free, self-organising, wireless technology, the effort shrinks

to a minimum. Even wireless software updates for the devices while running are possible at any time over

the mesh network. The installation of JUNG HOME can begin with a SCHUKO® socket or a push-button and

can be extended as required – from room to room or floor to floor.

Brilliantly simple: the smart socket

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 2 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

The JUNG HOME SCHUKO® socket replaces conventional socket inserts and immediately makes the power

connection switchable – by push-button, with the app and at the socket itself. An operating button with multi-

coloured backlight indicates the operating status at the same time. The internal memory for up to 16 freely

programmable timer programs with astro function and automatic summer and winter time adjustment

automates daily life. And if you want it even smarter: the JUNG HOME SCHUKO® socket Energy additionally

measures the energy consumption – for intelligent energy management, for example in the form of automatic

switching to standby.

Under the plaster: system inserts and actuators

Whether touch dimmer, switch insert or blinds insert: the flush-mounted range covers all current application

areas. A DALI push-button controller additionally operates luminaires with the standardised lighting interface,

the room thermostat insert controls valve drives in the heating manifold or the electric underfloor heating.

With the JUNG HOME switch actuator with binary inputs, among other things, external sensors can be

integrated and loads up to 16 ampere switched. In this way, a conventional weather station finds its place in

the system and can control the awning when it is windy or raining.

In good shape: covers for control and operation

System inserts determine the function, the JUNG HOME cover controls the load. As required, this can

involve 1 or 2-gang push-buttons or an operating display for the room temperature. JUNG even offers motion

detectors for mounting on the inserts and a presence detector. Every combination is immediately ready for

use after putting onto the centre plate. The cover holds the wireless technology and can be taught easily

using the JUNG HOME app on a smartphone as well as allocated to rooms and included in scenes.

Completely untethered: wireless push-buttons with battery operation

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 3 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

There isn't a wall box everywhere you want an operating point. In these cases, the JUNG HOME push-button

with battery power comes into its own. Thanks to the adhesive film, it can be positioned freely and adheres to

all smooth surfaces, from wall tiles to bathroom mirrors and kitchen cabinets. Alternatively, it can extend

existing control units in a multiple frame from the switch range without needing an extra installation box –

maximum functional scope with minimum mounting effort.

Everything under control: the app from JUNG HOME

It is the core of the system. The JUNG HOME app for Android and iOS is available in the app stores for

Google and Apple as a free download. In only three steps, installers can set up the smart home with it: they

activate pairing mode on the product with the press of a button and let the app search for new Bluetooth®

devices. Afterwards, the program helps in configuring the devices, rooms and scenes. On the screen, the

installer allocates the tasks to the push-buttons. At the end, they only have to transfer the project wirelessly

to the customers' smartphones and it is finished.

For voice control and more: the JUNG HOME gateway

In order to connect the encrypted, local, wireless network of JUNG HOME to the outside world, there is the

JUNG HOME gateway. It is certified by the VDE Institute and has been awarded the "Smart Home -

Information Security Tested" seal. The gateway establishes the contact between the local Bluetooth® SIG

Mesh and the secure JUNG Cloud. Cloud-based Internet services such as Amazon Alexa or Google Home

can communicate with the devices in the JUNG HOME in this way. From 2023, a connection with Samsung

SmartThings will also be possible. The integration with the WORKS WITH mediola® manufacturer network

enables users to also link numerous IoT-compatible products with their home and, for example, to control

them using JUNG HOME push-buttons.

Application examples: JUNG HOME in practice

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 4 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

With JUNG HOME, professional trades can implement smart scenarios with no effort that will

impress their customers and generate added value. This pays back in additional turnover.

Save heating costs

The dominant theme: with rising energy prices, the motivation to save is increasing. The JUNG HOME room

thermostat display gives precise control of the heating. Individual timer programs can be specified for each

room, and interrupted if necessary – with the app or on the wall display itself. One movement is enough to

activate the preset economy temperature. A good argument for retrofitting in existing buildings, as in older

buildings every degree reduction in room temperature reduces the requirement for heating energy

particularly significantly.

Good morning in the bathroom

A nicely heated bathroom that receives the residents with bright, friendly lighting after they get up – who

doesn't want that? The programmable heating control of JUNG HOME and motion detectors with astro

function provide heat and light precisely when they are needed. The rest of the time, the bathroom simply

stays cooler to save energy, or the lamps go on dimmed – for example in the middle of the night when a

bright light would dazzle the eyes.

Outfox the stand-by culprits

They are still among us - the inefficient electrical devices with high stand-by consumption. The JUNG HOME

SCHUKO® socket Energy doesn't just get wise to them, it also helps with the solution to the problem: thanks

to the energy measurement function, it can detect when the consumption sinks below a preset threshold

value when the device is switched off or standby mode begins. The socket switches itself off independently

and disconnects the stand-by culprit from the mains.

Is the iron switched off?

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 5 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

Never mutter again about whether electrical loads at home have really been switched off: a push-button from

JUNG HOME only activates the socket for a specified time. After 30 or 60 minutes it switches off on its own –

until the next button press. The JUNG HOME app also shows the current operating state on the smartphone.

In this way, it is possible to check comfortably from the sofa whether everything is in order. Very practical

when the ironing area is in the cellar, for example, or on a different floor.

Oh you joyful!

Christmas is definitely coming, and with it the electric Christmas tree lights. Thanks to JUNG HOME, the

chain of lights provides an atmosphere fully automatically: two settings in the app are enough to ensure the

JUNG HOME SCHUKO® socket switches on automatically at dusk and switches it off again at the normal

bedtime. For even more control, the electrician can install a wireless push-button as an additional control

unit. In this way, the chain of lights reacts like other switchable lamps in the room and can even become part

of a Christmas lighting scene.

Operating convenience at the bed

Central switches at the bed are standard in luxury hotels. JUNG HOME brings this convenience home to the

bedroom. System push-buttons can switch off the light in the entire home when going to bed. During the

night, they serve as panic buttons that activate emergency lighting and open blinds on the evacuation routes.

In turn, in the morning they activate a scenario that adjusts the light, shading and heating to the day. As

JUNG HOME uses the existing wiring, there is no need for structural alterations, and battery-powered push-

buttons can be installed everywhere. That makes the customer happy.

Goodbye

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 6 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

Lighting off, turn down the heating, close the shutters to the garden and switch off all SCHUKO® sockets or

devices that are not needed during your absence: in JUNG HOME, a single press of a button does all of this.

The central 1-way switch – positioned inside next to the front door – gives residents the security of not

having forgotten anything. For specialist firms it provides the possibility to demonstrate the advantages of

smart living with a concrete example across all rooms.

Questions and answers: FAQs on JUNG HOME

Any questions? Here you can find everything that specialist firms need to know about the new JUNG

system – packaged together at a glance.

What is the time needed and do I require special training?

The planning and mounting are no different to a conventional installation. As a result, no particular

qualification or training is needed. The system inserts from JUNG HOME are installed as normal and

provided with a smart centre plate where all the wireless technology can be found. Commissioning using the

smartphone app only takes a few minutes. Video tutorials from JUNG show the process step by step.

Do the system inserts fit into standard wall boxes?

With the exception of the JUNG HOME SCHUKO® sockets, all products fit into a standard wall box. The

sockets have a large installation depth of 45 millimetres and need deep wall boxes. However, JUNG

provides installation frames with an adapter ring as an accessory that increases the space from the socket

housing to the back of the box. This allows the smart sockets to also fit into an existing, flat wall box.

How does the transfer to the customer work?

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 7 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

The JUNG HOME app with which the installer puts the system into operation saves all project data on the

smartphone. The project file can be exported and transferred to the customer. As soon as the customer

opens the project on their phone – also with the JUNG HOME app – they can access the devices and

operate their home. There are various possibilities for transferring the file: a messaging service such as

WhatsApp or Signal, as well as e-mail or a cloud storage service (Dropbox, OneDrive). The specialist firm

can also export the project file to their own PC and save it there – as a backup copy in case the original

configuration needs to be reinstated at a later time.

Why does JUNG use Bluetooth® and no other wireless standard?

Compared to other wireless protocols, such as EnOcean, Z-Wave and Zigbee, Bluetooth® has a decisive

advantage: every modern smartphone uses the standard. Specialist firms can immediately begin with the

configuration without previously installing a wireless system or having IP knowledge. There is also no need

for a WLAN router for the installation, which allows working in incomplete buildings before even the tenants

or owners have moved in. In addition, there are also the automatic encryption and self-organising mesh

network, which make networking as reliable as it is easy.

Why did JUNG decide on Bluetooth® SIG Mesh?

Bluetooth® wireless has been used in building technology for a long time. Some providers have developed

their own solutions that are manufacturer-specific. That means they only work within their own product

family. Devices from other brands cannot be integrated. That is different with Bluetooth® SIG Mesh. The

standard-setting Special Interest Group (SIG) ensures adherence to the standard. Furthermore, the protocol

has already proved its stability: there are professional installations in commercial buildings and multi-storey

car parks with hundreds of devices that work absolutely reliably.

Is JUNG HOME compatible with other Bluetooth® products?

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 8 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

Purely technically, all sensors and actuators come into question that use the Bluetooth® SIG Mesh standard

of the Special Interest Group (SIG). Commissioning is, however, only possible when the devices are added

to the JUNG HOME app. In practice, JUNG tests from case to case whether the exchange works reliably,

and only then releases third-party products for the app.

What is the radio range of the system?

The range of the entire mesh network depends on how many devices are installed and where they are

installed. Thick walls and steel reinforcements can reduce the range as with all wireless solutions. In good

conditions, distances of 30 metres between two participants are possible. If a more distant device cannot be

reached, it is sufficient to install a JUNG HOME socket or a different device from the system connected to

the electrical installation.

What happens with eNet SMART HOME now there is JUNG HOME?

JUNG eNet SMART HOME will continue to be produced. There is a large number of active systems and

many installers who like to work with it. Due to its self-explanatory technology and simple configuration,

JUNG HOME could open up new markets and enlarge the base for smart-home installations in general.

What are the differences to KNX?

JUNG HOME and KNX are difficult to compare. As the international standard for building automation, KNX

offers many more possibilities. With the KNX range from JUNG and other manufacturers, experts can

implement smart-building projects of almost any size and complexity. However, the installation of bus lines

and parameterisation of the KNX devices demands significantly more time and requires special skills. JUNG

HOME puts specialist trades in the position to fulfil customer requirements significantly more quickly, more

easily and at an attractive price.

Is JUNG HOME compatible with the coming smart-home standard Matter?

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 9 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

The Matter standard is currently still in development, which is why it is too early to make an announcement.

Due to the potential significance for end customers, JUNG is observing this topic carefully and will provide a

solution if there is a demand for it that makes JUNG HOME compatible with Matter systems in the homes of

the users.

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 10 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

Statt Smart Home kompliziert zu denken, lieber einfach smart

machen. 90 Prozent der Installationen bei Neubau und

Sanierung werden konventionell durchgeführt. JUNG HOME

ist......

Von 230 Volt auf Smart in 5 Minuten: JUNG HOME basiert auf

der konventionellen 230-Volt-Installation und wird wie gewohnt

installiert. Nachdem die smarten Steckdosen montiert sind,...

Für ein smartes Zuhause genügt ein Schraubendreher und ein

Smartphone. Die JUNG HOME App bietet den direkten Zugriff

auf alle Geräte. Ganz ohne Internet, WLAN-Router oder

Server.......

JUNG HOME SCHUKO® Steckdosen gibt es in zwei Varianten.

Beide sind schaltbar: über die JUNG HOME Taster, die App

oder an der Steckdose selbst. Außerdem sind frei...

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 11 / 12

JUNG HOME: the smart home upgrade

for every electrical installation

Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking

easier than ever. The new system smartifies every building – with no server, no

Internet, no hammer drill.

Das JUNG HOME Raumthermostat-Display im Programm LS

990 in Alpinweiß. Je nach verwendetem Systemeinsatz steuert

JUNG HOME sowohl wassergeführte Fußbodenheizungen,... Im JUNG HOME System steuern smarte Taster alle Funktionen.

Sie sind in den bekannten Serien A, CD, LS und in den Farben

von Les Couleurs® Le Corbusier erhältlich und integrieren

sich......

JUNG HOME auf einen Blick: Licht, Schatten, Temperatur:

JUNG HOME besteht im Kern aus Systemeinsätzen, Aufsätzen

und Steckdosen. Lokal vernetzt über Bluetooth Mesh.

JUNG PRESS OFFICE · Agentur Richter

Mail: [email protected]

Pressinformation from 03.10.2022 Page 12 / 12

JUNG Smart User guide

Related papers

Other documents