2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. Kommander
  8. KA02
KA02

Kommander KA02 User guide

  • Hello! I've read the user guide for the KA02 Amplifier, and I'm ready to assist with any questions you might have. The document details the mounting options and kits available, including the K-BRK for single units and the K-RACK2 for rack mounting three units. I can help you with installation or operation questions.
  • How is the Kommander-KA02 amplifier controlled?
    Where can the Kommander-KA02 be installed?
    What mounting kits are available for KA02?
    What does the K-BRK kit do?
    What does the K-RACK2 kit do?
17
70mm
[2,8in]
140mm
[5,5in]
32mm
[1,3in]
16mm
[0,6in]
18mm
[0,7in]
3. Position the amplifier unit on the bracket and use the
screws to secure it.
Torx T10
Torx T10
Mounting Kits
The Kommander-KA02 amplifier is designed to be controlled
remotely, with no need of direct access the unit. This makes
the devices easy to install, either in a recess or on top of a
shelf or inside of a rack cabinet.
Two mounting kit are available:
• K-BRK bracketing system for single KA02 unit
• K-RACK2 rack mount 1U for three KA02 units.
K-BRK Assembly
1. The Kommander-KA02 amplifier unit can be mounted
on any surface with any orientation. Identify a
comfortable position for the amplifier on the mounting
surface and make two holes at the distance of 70mm
(2.8 in) to each other.
Install the K-BRK bracket on the surface with the
provided mounting kit.
2. Focus on the Kommander-KA02 unit: unscrew the
lateral screws positioned at the center of the unit and
remove the plates from the bottom of the amplifier.
Keep the screws aside for further use.
Kommander-KA02
User Guide
/