IN VEHICLE INSTALLATION (CONTD.)
11. Turn on Wi-Fi upon the 380GW
until the button sAfter the Dash Cam has powered on, then press the Wi-Fi button start to flash
Blue in colour, to indicate that the Wi-Fi function is turned on and awaiting a connection.
12. Connect Mobile Phone to the 380GW
With the Nextbase Cam Viewer APP working upon the Smartphone / tablet, press “Connect to
Dash Cam” and then choose the 380GW Dash Cam option. This will show the Live View image
from the Dash Cam upon the Cam Viewer APP.
26
IN VEHICLE INSTALLATION (CONTD.)
13. Remove the 3M protective sheet
Peel off the red layer to expose the 3M sticky pad beneath.
14. Locate and then check the 380GW camera position using App
Offer the Dash Cam towards the windscreen whilst looking at the Live View on the connected
Smartphone / Tablet. Ensure that the Live View shows the desired image by moving the Dash
Cam to the best position possible on the windscreen and adjusting the lens
accordingly.
Avoid any painted section of the windscreen being seen in the Live View and ensure the Dash
Cam is mounted vertically, with the smartphone image the right way up !
27
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
NextBase 300W Owner's manual
-
NextBase 512GW Owner's manual
-
NextBase NBDVR512GW ULTRA User manual
-
-
-
NextBase 412GW User manual
-
-
-
-
NextBase Mirror Dash Cam Owner's manual
Other documents
-
Boss Audio Systems BCAMW80 User manual
-
Boss Audio Systems BCAM60 User manual
-
Ring RDC30 User manual
-
Dashmate DSH-680 User manual
-
Garmin Camper 785 & Digital Traffic (Camper 785 MT-D) Owner's manual
-
Garmin CAMPER 785 EU Owner's manual
-
Navman MiVue™870 SAFETY User manual
-
-
Garmin DriveAssist 51 Owner's manual
-
