NextBase NBDVR380GW User manual

Hello! I've reviewed the user manual for the Nextbase 380GW dash cam. This document provides instructions on how to install and connect your dash cam, and use the mobile app for live view and positioning your device in the car. I'm ready to assist you with any questions about the features or setup process as outlined in this manual.
How do I turn on Wi-Fi on the 380GW?

How do I connect my mobile phone to the 380GW?

How do I check the camera position using the app?

IN VEHICLE INSTALLATION (CONTD.)

11. Turn on Wi-Fi upon the 380GW

until the button sAfter the Dash Cam has powered on, then press the Wi-Fi button start to flash

Blue in colour, to indicate that the Wi-Fi function is turned on and awaiting a connection.

12. Connect Mobile Phone to the 380GW

With the Nextbase Cam Viewer APP working upon the Smartphone / tablet, press “Connect to

Dash Cam” and then choose the 380GW Dash Cam option. This will show the Live View image

from the Dash Cam upon the Cam Viewer APP.

IN VEHICLE INSTALLATION (CONTD.)

13. Remove the 3M protective sheet

Peel off the red layer to expose the 3M sticky pad beneath.

14. Locate and then check the 380GW camera position using App

Offer the Dash Cam towards the windscreen whilst looking at the Live View on the connected

Smartphone / Tablet. Ensure that the Live View shows the desired image by moving the Dash

Cam to the best position possible on the windscreen and adjusting the lens

accordingly.

Avoid any painted section of the windscreen being seen in the Live View and ensure the Dash

Cam is mounted vertically, with the smartphone image the right way up !