Version 2.0
68.6 CM/27" All-In-One PC
E27301 (MD 64005)
Quick Start Guide
QSG MD64005 MSN 4008 0978 V2.0.indd 1QSG MD64005 MSN 4008 0978 V2.0.indd 1 20.08.2021 08:54:0120.08.2021 08:54:01
MSN 3003 2984
Quick Start Guide
Before you start
A protective foil is on the surfaces to protect the device against scratching
during production and transportation.
Pull off all the foil after you have set up the device correctly and before
bringing it into operation.
Setting up and initial use
−Connect the AC adapter to the AIO PC to supply power to the device, plug it into a
power outlet and switch on the power point.
Briefl y press the on/off switch.
Using the AIO PC
1. Follow the instructions on the screen. Step by step instructions will guide you
through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
2. Select your desired language and then the corresponding country settings.
3. Connect to the Internet if you have a properly-equipped Internet connection.
If you choose to skip this point, you can connect to the Internet later via the Windows®
interface. If you have already set up an Internet connection, you can now log in to your
AIO PC using a Microsoft account. The Microsoft Store allows you to purchase new apps or
update previously installed apps. If you log in on a local account, you can set up a Micro-
soft account later at any time.
4. Do not turn off the AIO PC during the initial confi guration. This may adversely affect
the confi guration. Only switch the AIO PC off after the confi guration has been com-
pleted successfully and the initial screen appears.
AC power
Only use this AIO PC with the AC adapter that was delivered with it.
QSG MD64005 MSN 4008 0978 V2.0.indd 2QSG MD64005 MSN 4008 0978 V2.0.indd 2 20.08.2021 08:54:1220.08.2021 08:54:12
-
1
-
2
