SENIC GIRA User guide

Brand: SENIC

Model: GIRA

Type: User guide

SENIC GIRA is a smart indoor switch compatible with Philips Hue, allowing you to control your smart lights with the convenience of a physical switch. Mount it using sticky dots or screws, and pair it with the Philips Hue app to customize actions for each button. Use it to turn lights on/off, dim them, or trigger scenes. For advanced control, integrate it with HomeKit via the Philips Hue Bridge, enabling you to control other smart devices and create automations.

SENIC GIRA is a smart indoor switch compatible with Philips Hue, allowing you to control your smart lights with the convenience of a physical switch. Mount it using sticky dots or screws, and pair it with the Philips Hue app to customize actions for each button. Use it to turn lights on/off, dim them, or trigger scenes. For advanced control, integrate it with HomeKit via the Philips Hue Bridge, enabling you to control other smart devices and create automations.

Get Started

Hey there! Thank you for choosing our smart switch.In order to set up

theFriends of Hue Smart Switch by Senic and Gira, please open the

Philips Hue App and follow thesesteps:

1. Click onSettingsin the bottom menu

2. SelectAccessory Setup

3.SelectAdd Accessory

4. SelectFriends of Hue Switch

5. SelectSenic Friends of Hue Switch

You can now invest in our company with a little as 250$

Quick Start Guide -

Friends of Hue Indoor

Switch

0

After doing this, please follow the instructions in the app to pair your

switch with Philips Hue System.

Mounting

Mounting using sticky dots

1.Choose a location

You can mount the switch on most indoor wall surfaces (e.g. glass, wood,

tiles, at paper wall). To do so, rst choose a clean and dry location.

2.Place black foil onto the wall

Peel off the white backside and place the foil exactly where you want

your Friends of Hue Switch. This foil is made from a special material so it

doesn’t damage your wall.

3.Place sticky dots on black foil

Apply an adhesive dot to each of the designated corners of the black foil.

4.Place switch on top of sticky dots

Important: Before placing the switch onto the sticky dots, make sure that

the arrow on the back is facing upwards.

Line up your Friends of Hue Switch with the foil, making sure your

Friends of Hue Switch is facing the right direction and is leveled out.

Single Rocker Installation*

* YOU MUST PAIR THE SMART SWITCH WITH THE

PHILIPS HUE APP USING THE DOUBLE ROCKERS

BEFORE REPLACING THEM WITH THE SINGLE ROCKER.

1.Remove double rockers

Firmly press on the outer edge of both single rockers so the rockers pop

out.

2.Align switch & single rocker

Make sure to ali

gn

the switch so

y

ou can read To

p

on the inside of the

g y p

switch and Gira on the inside of the single rocker.

3.Install single rocker

Firmly press on the center of the switch with both thumbs until the

rocker pops into position.

4.Setup in Hue App

Inside the Philips Hue App, you will still see the double rocker setup as

before. Only the right side of the switch will now trigger actions like

On/Off or Dimming.

PLEASE KEEP THE DOUBLE ROCKERS IN A SAFE PLACE

IN CASE YOU MAKE CHANGES TO YOUR SYSTEM.WITH

THE SINGLE ROCKER SETUP, YOU CAN ONLY USE

‘ON/OFF’ AND DIMMING FOR ONE ROOM.

Using the switch with Homekit

Via the Philips Hue Bridge (v2), you can also use the switch with any

homekit compatible scene or device, including speakers like Sonos or

Homepod, outdoor plugs or sprinklers.

You can follow the instructions inthis videoor take a look at our

extensive tutorial including the videohere.

Support & FAQ

Have thoughts, feedback or questions? You can always reach the Senic

team directly at[email protected]om.

You can nd our FAQ here.

Newsletter

Links

Languages

Currency

Copyright © 2022, Senic.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

SENIC GIRA User guide

Brand: SENIC

Model: GIRA

Type: User guide

SENIC GIRA is a smart indoor switch compatible with Philips Hue, allowing you to control your smart lights with the convenience of a physical switch. Mount it using sticky dots or screws, and pair it with the Philips Hue app to customize actions for each button. Use it to turn lights on/off, dim them, or trigger scenes. For advanced control, integrate it with HomeKit via the Philips Hue Bridge, enabling you to control other smart devices and create automations.

Download PDF

Other documents