Windy31 Quick Installation Guide
Setting:
Check the following setting status
Ensure its setting values are 91 or 00 as illustrated below:
"NoDriveTypeAutoRun"=dword:00000091 (Auto Execution on/default)
"NoDriveTypeAutoRun"=dword:00000000 (Auto Execution on)
"NoDriveTypeAutoRun"=dword:000000ff (Auto Execution off)
(1) Check log-in users setting
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion
\Policies\Explorer]
(2) Check other users setting
[HKEY_USERS\(the relevant users stream)
\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
(3) Check policies to be provided to new user
[HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion
\Policies\Explorer]
c. Group Policy (gpedit.msc) Setting
Check group policy settings through group policy MMC snap-in.
[start] [run] type in "gpedit.msc" and click ok [ Local
Computer Policy] [User Configuration] [Administration
Templates] [system] Double click Turn off Autoplayin the list
and select Disabled Click Ok
3. Virtual CD-ROM Drive does not show up, and Windy31 is
recognized as thumb drive.
4. After internal error occurs and the installation complete
message does not show up, then automatically switches to LAN
adapter mode.
Wireless Broadband Router
Please be sure to have Windy31 inserted in the computer that
is connected to Internet.
Please check your PC for any Viruses and Spywares before
installation. Some Viruses and Spywares may interfere with
automatic installation of Windy31 driver and utility programs.
1. Windy31 is plugged in but not detected by the computer.
2. Windy31 is detected but does not proceed to auto installation.
[Basic setting] - Enable AutoPlay
[Advanced Setting]
1. Registry Setting
a. Local unit Policy Setting
[Start] [Run] Type in regedit
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdro
m] Double click "AutoRun and make sure the Value Data is "1"
( "0" means that Autoplay is disabled)
b. User Unit Policy Setting
Note : If you have installed a certain software related to CD-ROM Drive
and uninstalled, it may affect AutoPlay setting on your PC.